PRO TOOLS | MTRX II
The pinnacle of audio fidelity and flexibility
KEY FEATURES
› Connect to Pro Tools®, Core Audio
DAWs, Avid control surfaces, and
other studio devices with built-in I/O
and monitor calibration (or use it
standalone):
› 64 channels of DigiLink I/O
› 256 channels of Dante I/O
› 64 channels of MADI I/O
› Word Clock I/O
› 128 channels of SPQ Speaker
Processing
› Customize the interface with all the
I/O you need—including mic/line,
Thunderbolt 3, AES3, and additional
DigiLink, Dante, and more—through
eight option card slots
› Capture audio in the highest sound
quality with renowned DAD mic
preamps and AD/DA converters
› Set up a low-latency, 256-channel
native Pro Tools or other DAW system
with the Thunderbolt 3 option
› Calibrate and control MTRX II with the
included DADman software and
Pro | Mon Monitor Control
› Route audio to any connected device
across your facility with the 4,096 x
4,096 router
› Accommodate a full theatrical Dolby
Atmos configuration with the 512 x 64
summing mixer
› Take remote control of all sources
with Avid S6TM and other EUCONTM-
enabled control surfaces
Pro Tools | MTRXTM II is a powerful studio centerpiece that builds
on the I/O, routing, and monitoring versatility of its predecessor.
With integrated DigiLinkTM, Dante, MADI, and SPQ Speaker
Processing, eight I/O card slots, and 256 channels of optional
ThunderboltTM 3 connectivity, you can take on the largest music
and audio productions with ease.
STREAMLINE YOUR STUDIO WITH THE I/O YOU NEED
Pro Tools | MTRX II not only comes with 64 channels of built-in DigiLink
I/O, 256 channels of Dante, and 64 channels of MADI, it’s fully modular.
Configure its eight card slots with all the analog, digital, and additional
DigiLink, Dante, and other I/O you need (the same option cards as
MTRX) to support any artist, ensemble, or workflow. Add Thunderbolt 3
connectivity. Replace multiple single-format interfaces taking up rack
space. Route any signal between different I/O formats. And connect
multiple HDX systems and DAWs together with a single interface.
GET UNPARALLELED SOUND QUALITY AND CLARITY
Building on the MTRX legacy, MTRX II delivers the cleanest, most
transparent, and highly detailed AD and DA conversion of any audio
interface. This enables you to capture vocals and acoustic instruments
without any coloration—exactly as the sources sound—and then monitor
your mix in all its sonic glory through some of the highest quality audio
converters in the industry.
MONITOR AUDIO IN MORE WAYS
With integrated SPQ Speaker Processing, DADman Pro | Mon for
monitor calibration and control, and the expanded 512 x 64 summing
mixer, MTRX II will satisfy all of your monitoring needs. Calibrate your
speakers to compensate for their acoustic response in any room with
up to 16 filters per monitor channel. And get up to 128 channels of
room correction, each with adjustable delay and filters, from stereo to
multistem Dolby Atmos summing.
CONNECT TO ANY DANTE NETWORK
With 256 integrated Dante channels, you can connect your Pro Tools
| HDXTM system to any Dante network—the industry’s preferred audio-
over-IP solution. Not only is Ethernet economical—especially where long
cable runs are required—it allows for a more versatile bi-directional
workflow that leverages your facility’s Ethernet infrastructure to route
audio between multiple rooms and devices.
OPTION CARDS
Pro Tools | MTRX II is fully modular, enabling you to customize it with up to eight analog and/or digital audio I/O
option cards (sold separately). Install the maximum eight AD and/or DA cards to support up to 64 analog channels,
design an all-digital box, or create any combination between.
PTMTXIIDS0323
FOR MORE INFORMATION, VISIT
avid.com/mtrxII
WHAT’S INCLUDED
› Pro Tools | MTRX II base unit
› Pro | Mon 3 monitoring control
› DADman software
› AC power cable
FOR MORE INFORMATION, VISIT
avid.com/mtrxII
