• Presonus AIR10 2-Way 1x10" Active Loudspeaker

Clear, Accurate Sound for Mobile and Installed Systems

AIR10: Versatile, customizable, and easy to transport.

Compact and lightweight, AIR10 active loudspeakers provide a rich, extended low-end and natural high-frequency extension in an enclosure that will easily fit in the backseat of a small car. Backed by 1,200W (dynamic) of Class D/Class AB power and enhanced with easy-to-use digital tuning functions, the AIR10 gives you all the power and tools you need for both mobile and installed sound.

The best of two worlds.

Each type of power amplifier has advantages and disadvantages. By employing different amplifier types for each driver, AIR10 loudspeakers use the respective strengths of Class D and Class A/B amplifiers to provide optimal response throughout the speaker’s frequency range. A 500W (continuous), Class D amplifier powers the 10-inch low-frequency driver, providing efficient, clean low end when you need it. A 200W (continuous), Class AB amplifier powers the 1-inch high-frequency driver, delivering a natural sounding, "AIR-y" high end. The combination can deliver up to 121 dB SPL of sweet, clear sound between 55 Hz and 20 kHz.


AIR10: Versatile, customizable, and easy to transport.
Compact and lightweight, AIR10 active loudspeakers provide a rich, extended low-end and natural high-frequency extension in an enclosure that will easily fit in the backseat of a small car. Backed by 1,200W (dynamic) of Class D/Class AB power and enhanced with easy-to-use digital tuning functions, the AIR10 gives you all the power and tools you need for both mobile and installed sound.

Versatile mounting for a variety of applications.

The AIR10’s molded plastic cabinet can be mounted in several ways, providing tremendous versatility. The multi-angle enclosure sports nonskid rubber feet on the bottom for upright front-of-house use and nonskid rubber feet on one side for stage monitor applications. Rig the speaker using M10 fly points, yoke-mount it to walls or beams, or ground-stack it for portable applications. Mount it on a tripod or atop an AIR-series subwoofer using an optional sub pole. The integrated dual-position pole mount lets you aim the speaker level or at a 7.5˚ downward tilt. And the AIR10 is easy to transport, thanks to its top-mounted handle.

You’ll be floored.

If you place a loudspeaker against a hard surface such as a wall or floor, the low frequencies emitted from the rear of the enclosure propagate back into the room. This effect, called “half-space loading,” can increase the output of bass frequencies by as much as 6 dB, and it is an unavoidable issue with floor monitors. Most PA speakers in this class simply roll off excess low frequencies with a highpass filter—a half-baked compensation for half-space loading. In contrast, AIR-series full-range loudspeakers offer a Monitor preset that uses DSP to retune the speaker to both compensate for bass buildup and maintain a tight mid-bass response, while suppressing problematic frequencies to reduce feedback.

Flexible inputs.

AIR-series full-range loudspeakers offer a choice of inputs so you can use them with a variety of sources. You get two combo XLR mic/TRS line inputs, each with a Class A microphone preamplifier and independent gain control. A stereo 1/8” connection admits signals from smartphones, tablets, and other consumer audio devices. These signals can be combined with the AIR10’s internal mixer, and a balanced XLR Mix output lets you send pass the signals to other AIR-series loudspeakers.


Technical Specifications
Acoustic Performance
Configuration Active 2-way
Frequency Range (-3 dB) 70 Hz to 20 kHz
Frequency Range (-10 dB) 55 Hz to 20 kHz
Maximum Output 121 dB SPL
Nominal Dispersion (HxV) 90˚x 60˚
Transducer
LF Driver 10” (2” voice coil)
HF Driver 1” compression
Amplifier
Amplifier Type Class D (LF), Class AB (HF)
Total System Power 1,200W dynamic
LF Power 500W continuous
HF Power 200W continuous
Connections and Controls
Inputs 2 x XLR/TRS mic/line combo; 1 x 1/8” TRS stereo
Outputs 1 x XLR Mix Out
DSP
DSP Features LCD screen with EQ and multiple presets
Enclosure
Cabinet H-PP molded
Grille 1.2 mm steel
Handles 1 top
Flypoints 2 top, 1 back
Pole Mounting Dual position (0˚, 7.5˚)
Dimensions (H x W x D) 20.3” x 11.8” x 11.5” (516 mm x 300 mm x 291 mm)
Weight 28.7 lbs (13 kg)
Power
Power Input 115V / 230V ~50/60 switchable
Maximum Current 2.3A (230V-50 Hz), 4.6A (120V)

Write a review

Note: HTML is not translated!
    Bad           Good

Presonus AIR10 2-Way 1x10" Active Loudspeaker

  • Brand: Presonus
  • Product Code: Presonus AIR10 2-Way 1x10" Active Loudspeaker
  • Availability: In Stock
  • $599.95
  • $499.95

  • Ex Tax: $499.95

Tags: Presonus AIR10 2-Way 1x10" Active Loudspeaker