Apollo 8p. Next-Generation Conversion with Eight Onboard Preamps.
Apollo 8p is a dramatic update to one of the world’s most popular professional audio interfaces, delivering enhanced sound with the tone, feel, and flow of analog recording. This 16 x 20
Thunderbolt 2 interface features eight onboard Unison™ mic preamps — perfect for mobile rigs and tracking full bands. Built on genuine UA analog design and next-generation A/D and D/A conversion, Apollo 8p also features powerful UAD-2 QUAD Core processing, letting you run UAD Powered Plug-Ins in real time. With sound that surpasses anything in its class, Apollo 8p rivals modular converters costing twice the price, in a sleek new package.
Features & Specs.
Audio Interface
  • Sample rates up to 192 kHz at 24-bit word length
  • 16 x 20 simultaneous input/output channels:
  • Eight channels of analog-to-digital conversion via mic, line, or high-impedance inputs
  • 12 channels of digital-to-analog conversion via:
  • Six mono line outputs
  • Stereo monitor outputs (switchable to fixed line outputs)
  • Two stereo headphone outputs
  • Eight channels of digital I/O via:
  • Eight channels ADAT Optical Lightpipe I/O with S/MUX for high sample rates
  • Lightpipe I/O can be switched to S/PDIF optical with sample rate conversion
  • Two Thunderbolt 2 ports facilitates daisy-chaining of other Thunderbolt devices
  • Cascade up to 4 Apollo interfaces and 6 UAD devices total over Thunderbolt (Mac)
Microphone Preamplifiers
  • Eight high-resolution, ultra-transparent, digitally-controlled analog mic preamps
  • Unison™ technology for deep integration with UAD preamp and pedal plug-ins
  • Front panel and software control of all preamp parameters
  • Switchable low cut filter, 48V phantom power, pad, polarity inversion, and stereo linking
Monitoring

  • Stereo monitor outputs (independent of the six line outputs)
  • Digitally-controlled analog monitor outputs maintains highest fidelity
  • Front panel control of monitor levels and muting
  • Two stereo headphone outputs with independent mix buses
  • Independent front panel volume controls for headphone outputs
  • Front panel pre-fader metering of monitor bus levels
  • S/PDIF outputs can be set to mirror the monitor outputs
  • Up to two alternate stereo monitor outputs selectable via front panel or Console software
  • Assignable front panel monitor function switch for alternate speakers, dim, & mono
UAD-2 Inside
  • QUAD Core DSP with four SHARC® processors
  • Realtime UAD Processing on all analog and digital inputs via Console application
  • Same features and functionality as other UAD-2 devices when used with DAW
  • Can be combined with other UAD-2 devices for increased mixing DSP
  • Includes UAD Powered Plug-Ins “Realtime Analog Classics Plus” bundle
  • Complete UAD plug-ins library is available at the UA online store
Software

Console application:
  • Analog-style control interface for realtime monitoring and tracking
  • Enables Realtime UAD Processing with UAD plug-ins
  • Remote control of Apollo 8p features and functionality
  • Virtual I/O for routing DAW tracks through Console
Console Recall plug-in:
  • Saves Console configurations inside DAW sessions for easy recall
  • Convenient access to Console’s monitor controls via DAW plug-in
  • VST, RTAS, AAX 64, and Audio Units plug-in formats
UAD Meter & Control Panel application:
  • Configures global UAD settings and monitors system usage
Other
  • Easy firmware updates
  • 1U rack-mountable form factor
  • One year warranty includes parts and labor
System Requirements
Thunderbolt Systems
UAD Powered Plug-Ins version 8
  • Apple Mac computer with available Thunderbolt or Thunderbolt 2 port
  • Mac OS X 10.8.5 Mountain Lion, 10.9.x Mavericks, or 10.10.x Yosemite
  • 4 gigabytes available disk space
  • Internet connection to download software and authorize UAD plug-ins
  • Compatible VST, Audio Units, RTAS, or AAX 64 plug-in host DAW software
  • Thunderbolt cable (sold separately)
 
Specifications
Note: All specifications are typical performance unless otherwise noted, tested under the following conditions: 48 kHz internal sample rate, 24-bit sample depth, 20 kHz measurement bandwidth, with balanced output.
System
I/O Complement
  • Microphone Inputs 8
  • High-Impedence (Hi-Z) Instrument Inputs 2
  • Analog Line Inputs 8
  • Analog Line Outputs 6 (eight including monitor outputs)
  • Analog Monitor Outputs 2 (one stereo pair)
  • Headphone Outputs 2 Stereo
  • Digital Input Port (TOSLINK optical) 1 (ADAT or S/PDIF, selectable)
  • Digital Output Port (TOSLINK optical) 1 (ADAT or S/PDIF, selectable)
  • Thunderbolt 2 ports 2 (Thunderbolt 1 compatible)
  • Word Clock 1 input, 1 output
A/D – D/A Conversion
  • Supported Sample Rates (kHz) 44.1, 48, 88.2, 96, 176.4, 192
  • Bit Depth Per Sample 24
  • Simultaneous A/D conversion 8 channels
  • Simultaneous D/A conversion 14 channels
  • Analog Round-Trip Latency 1.1 milliseconds @ 96 kHz sample rate
  • Analog Round-Trip Latency with four serial UAD-2 plug-ins via Console application 1.1 milliseconds @ 96 kHz sample rate

Analog I/O
Frequency Response 20 Hz – 20 kHz, ±0.1 dB
Microphone Inputs 1 - 8
  • Connector Type XLR Female, pin 2 positive (Combo XLR/TRS)
  • Phantom Power +48V (switchable per mic input)
  • Dynamic Range 119 dB (A–weighting)
  • Signal-to-Noise Ratio 119 dB (A–weighting)
  • Total Harmonic Distortion + Noise –110 dBFS
  • Equivalent Input Noise –128.7 dB
  • Common-Mode Rejection Ratio (CMRR) 70 dB (10’ cable)
  • Default Input Impedance 5.4K Ohms (variable via Unison plug-ins)
  • Gain Range +10 dB to +65 dB
  • Pad Attenuation 20 dB (switchable per input)
  • Maximum Input Level +25 dBu (minimum gain, pad engaged)
Hi-Z Inputs 1 - 2
  • Connector Type ¼” Female TS Unbalanced
  • Dynamic Range 118 dB (A–weighting)
  • Signal-to-Noise Ratio 118 dB (A–weighting)
  • Total Harmonic Distortion + Noise –103 dBFS
  • Input Impedance 1M Ohms (variable via Unison plug-ins)
  • Gain Range +10 dB to +65 dB
  • Maximum Input Level +12 dBu
Line Inputs 1 – 8
  • Connector Type ¼” Female TRS Balanced (Combo XLR/TRS)
  • Dynamic Range 120 dB (A–weighting)
  • Signal-to-Noise Ratio 120 dB (A–weighting)
  • Total Harmonic Distortion + Noise –110 dBFS
  • Common-Mode Rejection Ratio (CMRR) 60 dB (10’ cable)
  • Input Impedance 10K Ohms
  • Gain Range +10 dB to +65 dB (Line Input Gain = ON)
  • Reference Level +4 dBu (Line Input Gain = BYPASS)
  • Maximum Input Level +20.2 dBu
Line Outputs 1 – 6
  • Connector Type ¼” Female TRS Balanced
  • Dynamic Range 121 dB (A–weighting)
  • Signal-to-Noise Ratio 121 dB (A–weighting)
  • Total Harmonic Distortion + Noise –110 dBFS
  • Stereo Level Balance ±0.05 dB
  • Output Impedance 100 Ohms
  • Maximum Output Level +20.2 dBu
Monitor Outputs Left & Right
  • Connector Type ¼” Female TRS Balanced
  • Dynamic Range 121 dB (A–weighting)
  • Signal-to-Noise Ratio 121 dB (A–weighting)
  • Total Harmonic Distortion + Noise –110 dBFS
  • Stereo Level Balance ±0.05 dB
  • Output Impedance 100 Ohms
  • Maximum Output Level +20.2 dBu
Stereo Headphone Outputs 1 – 2
  • Connector Type ¼” Female TRS Stereo
  • Dynamic Range 118 dB (A–weighting)
  • Signal-to-Noise Ratio 118 dB (A–weighting)
  • Total Harmonic Distortion + Noise –101 dBFS
  • Maximum Output Power 160 mW into 300 ohm load
Digital I/O
S/PDIF
  • Connector Type (shared with ADAT) Optical TOSLINK JIS F05
  • Format IEC958
  • Supported Sample Rates (kHz) 44.1, 48, 88.2, 96
ADAT
  • Connector Type (shared with S/PDIF) Optical TOSLINK JIS F05
  • Format ADAT Digital Lightpipe with S/MUX
  • Supported Sample Rates (kHz) 44.1, 48, 88.2, 96, 176.4, 192
  • Channel Assignments @ 44.1 kHz, 48 kHz Port 1 = Channels 1 – 8, Port 2 = 1 – 8 (mirrored)
  • Channel Assignments @ 88.2 kHz, 96 kHz Port 1 = Channels 1 – 4, Port 2 = Channels 5 – 8
  • Channel Assignments @ 176.4 kHz, 192 kHz Port 1 = Channels 1 – 2, Port 2 = Channels 3 – 4
Word Clock
  • Connector Type BNC
  • Lock Range ±0.5% of any supported sample rate
  • Word Clock Input Termination 75 Ohms, switchable
Synchronization Sources
  • Internal, Word Clock, S/PDIF, ADAT

Electrical
Power Supplies External AC to DC Power Supply, Level V compliant
AC Input Connector Type IEC Male
AC Requirements 100V – 240V AC, 50 – 60 Hz
DC Connector Type XLR 4-Pin Locking Male (Neutrik P/N NC4MDM3-H)
DC Requirements 12 VDC, ±5%
Maximum Power Consumption 50 Watts

Mechanical
Dimensions
Width 19”
Height 1.75” (1U rack space)
Depth, Chassis Only 12.125”
Depth, Including Knob & Jack Protrusions 13.5”
Shipping Box (Width x Depth x Height) 24” x 17” x 8”
Weight
Shipping Weight (with box & accessories) 18 pounds
Weight (bare unit) 9.1 pounds
Package Contents
  • Apollo 8p Audio Interface Unit
  • External Power Supply
  • AC Power Cable (IEC)
  • Set of (4) Rack-Mount Screws
  • Getting Started URL Card

Write a review

Note: HTML is not translated!
    Bad           Good

Universal Audio Apollo 8p Interface w/ QUAD Processing (Mac)

  • Brand: Universal Audio
  • Product Code: Universal Audio Apollo 8p Interface w/ QUAD Processing (Mac)
  • Availability: In Stock
  • $3,499.00
  • $2,999.00

  • Ex Tax: $2,999.00

Available Options


Tags: Universal Audio Apollo 8p Interface w/ QUAD Processing (Mac)