The Fredenstein Bento 6S is a high performance module carrier for Fredenstein Series 600 modules or API-500 compatible plug-in cards. Accepting a maximum of 6 modules, the Bento 6 features several important upgrades compared with third party products: Universal power supply with voltage range from 90V AC to 240V AC, 50 to 60 Hz., increased output currents of +/-16V DC 1.6A and +48V DC 0.15A, 533mA per slot (about 3 times more than the standard calls for).
The Bento 6S power supply is also designed for extremely low noise with state of the art switching regulators that operate above 200 kHz. They also follow “green” guidelines that minimize power consumption to only what is needed.
Other features include the capability to drive very large capacitive loads, others might oscillate if presented with large capacitors to charge. The Bento 6S ramps up in a controlled manner (typically 0.2 seconds) and unlike most, both the +16V and -16V are regulated separately, auxiliary audio inputs and outputs and built-in audio routing where modules can be simply daisy-chained, compressor buss linking, and from the back- panel, and a multi-Layer backplane for increased signal integrity and lower noise floor.
Burl B1 Mic Pre
Based on the API 500 series form factor, the B1 was designed to compliment the B2 Bomber ADC, and give you multi-channel pleasure. With the proprietary BX3 input transformer and BX2 output transformer, the B1 Mic Pre delivers warmth with depth and clarity. An all discrete transistor, class-A, direct coupled, capacitor free circuit path, gives the B1amazing punch on drums, beautiful tonality on guitars, and warmth with presence on vocals.
- BURL custom BX3 input transformer
- BURL custom BX2 nickel output transformer
- Audiophile, discrete, class-A, direct-coupled, capacitor free circuit path
- Stepped gain contro
- Independent output level control
- 70 dB gain
- Impedance select
- 1/4” front panel DI input
- 30 dB pad for hot signals and balanced line level input
- Phantom power
- Phase reverse
- Tri-colored gain level indication
The B1 and B1D come complete with both Gain and Level controls. If you want that heavy, gainy tone, crank up the stepped gain control and offset that with the level control. If clean tone is your thing, turn the gain down and crank up the level. For ribbon mics and other low impedance sources, the B1 has a transformer coupled impedance select. The B1 was rigorously tested with the popular Royer R-121 in the low impedance setting, and it excels on guitar amps. The B1 gets the best out of any microphone, whether it be dynamic, condenser or ribbon.
Use the B1’s 1/4” instrument/line input on the front panel, plug in, crank up the gain and go. The PAD switch allows for hot signals and balanced line inputs through the mic XLR on the back panel. Run your tracks or mixes through the B1 for warmth and glue. Run multiple B1 channels for your rhythm tracks and you are there. Replace EQ and compression with true analog PHAT. Run your primary tracks through the B1 mic pre, follow with a B2 Bomber ADC and that’s about all you will need.
Receive FREE Shipping to ANYWHERE in the Continental United States on almost every item or order!
- Most items qualify for orders over $99.99
- FREE Economy shipping to the lower 48 states
- In order to protect your shipment from theft, we require a direct signature when delivered on most orders over $99
- International shipping is extra, contact us for an international shipping quote
- Free Shipping does not apply to special orders and oversized/overweight products
- Any expedited deliveries are available at an extra cost
Digital products are delivered via email, and nothing is physically shipped to you. Most products are delivered instantly, and will be marked as "eDelivery or Download" in these cases. Due to the irrevocable nature of digital goods, we are unable to offer returns or refunds for any order.
PLEASE NOTE: This product is delivered via secure, electronic delivery. You will receive the full product license and instructions direct to your email. Enjoy a safe and fast way to get the latest version and full support direct from the manufacturer.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.