Due to increased demand, some orders may experience a slight delay. Please allow an additional 24-48 hours for order processing & shipping.

{"id":4727277322329,"title":"SPL Performer m1000 Mono Power Amplifier (Red)","handle":"spl-performer-m1000-mono-power-amplifier-red","description":"\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eStyled in red, the \u003cb\u003eSPL m1000\u003c\/b\u003e is an analog, mono-block power amplifier. It utilizes a toroidal transformer to foster faithful reproduction at all levels. A custom-made Mundorf coil prevents any oscillation at the power stage, ensuring a wide variety of speakers can be operated.\u003c\/p\u003e\n\u003cp\u003e Power 1000W into 2 Ohms, 750W into 4 Ohms, or 420W into 8-Ohm speakers. You'll find a stepped trim control, as well as protection against DC at the output. An optically controlled limiter kicks in if the level is driven too hot. The limiter's design promotes minimal impact on the sonic signal, since the limiter is controlled in the photo-optical realm, and not the sonic domain.\u003c\/p\u003e\n\u003cp\u003e Neutrik XLR connections are on hand for line inputs and outputs. The input is passively routed to the XLR output in case you want to feed a second power amplifier, so the m1000 can work in bi-wired setups. The speaker connectors themselves are gold-plated binding posts that can accommodate wires up to 4mm, as well as banana plugs.\u003c\/p\u003e\n\u003c\/div\u003e\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eUltra-Compact Power Amplifier\u003c\/h2\u003eThe Performer m1000 amplifier is compact and powerful. Thanks to VOLTAiR technology, this power amplifier can control speakers up to their load limits.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eUp to 1000W\u003c\/h2\u003eDesigned as a mono block amplifier, this bipolar transistor power amplifier delivers up to 1000W into 2 Ohms, 750W into 4 Ohms, and 420W into 8 Ohms.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eToroidal Transformer\u003c\/h2\u003eThe Performer m1000 is equipped with a 1375 VA toroidal transformer, selected after listening tests. The power supply is equipped with a capacitance of 100,000µF for screening and electricity storage, as well as a faithful reproduction of impulse peaks. The toroidal transformer is mounted on a separate mounting plate that sits on 8 rubber dampers to extenuate any mechanical hum noise.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eProtection\u003c\/h2\u003eThe Performer m1000 has a protection circuit against DC (direct current) voltage at the output and a limiter against overloading the output. If DC is detected at the output, the amplifier automatically switches off. To protect the output from overload, a limiter will be deployed in case the input level is so hot that the output stage will overload. The limiter operates with a light-dependent resistor. This means that the regulating process is in the photo-optical domain and does not affect the audio signal.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eCustom Mundorf Coil\u003c\/h2\u003eThe Performer m1000 is equipped with a custom 3,8µH coil, one made by German high-end specialist Mundorf. This coil prevents the possibility of oscillation of the power stage. With the Mundorf coil in place, a huge variety of speakers can be operated seamlessly.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eProcessor Controlled Cooling\u003c\/h2\u003eHeat dissipation is done with a microprocessor-controlled fan cooling that only gets activated when the internal temperature exceeds certain limits. At about 112°F at the heat sink, the amplifier will engage the processor-controlled fan cooling.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eNeutrik I\/Os\u003c\/h2\u003eThe Performer m1000 is equipped with Neutrik XLR input and output connectors for balanced operation. The input signal is passively routed to the output connector to feed any optional, second power amplifier for bi-wiring. The input can be lowered via a Trim rotary switch from 0 dB to -5.5 dB in 0.5 dB steps. This is useful in order to achieve an optimal stereo sweet-spot in acoustically suboptimal rooms. In bi-wiring lineups, or in the studio with multiple speaker sets, the trim allows up to level speakers with different efficiency to equal loudness.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eGold-Plated Binding Posts\u003c\/h2\u003eThe speaker connectors are gold-plated binding posts. The terminals can accommodate both banana plugs as well as a wire of up to 4mm diameter.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eAmp control\u003c\/h2\u003eThe Performer m1000 has a 3.5mm mono jack designated to be the amplifier control. With the appropriate cable, the Performer can be connected to a preamplifier, so that when you turn the preamplifier on, the amplifier is automatically switched on, too.","published_at":"2020-09-27T03:05:56-04:00","created_at":"2020-09-27T03:05:57-04:00","vendor":"SPL","type":"Power Amplifiers","tags":["BHPHOTO","finance24","pro audio","special"],"price":361116,"price_min":361116,"price_max":361116,"available":true,"price_varies":false,"compare_at_price":515880,"compare_at_price_min":515880,"compare_at_price_max":515880,"compare_at_price_varies":false,"variants":[{"id":32188702523481,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SPLPERFM1KSL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SPL Performer m1000 Mono Power Amplifier (Red)","public_title":null,"options":["Default Title"],"price":361116,"weight":6804,"compare_at_price":515880,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/spl_splperfm1000_sl_performer_m1000_mono_power_1438644.jpg?v=1601190357"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/spl_splperfm1000_sl_performer_m1000_mono_power_1438644.jpg?v=1601190357","options":["Title"],"media":[{"alt":"SPL Performer m1000 Mono Power Amplifier (Red)","id":6955233312857,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/spl_splperfm1000_sl_performer_m1000_mono_power_1438644.jpg?v=1601190357"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/spl_splperfm1000_sl_performer_m1000_mono_power_1438644.jpg?v=1601190357","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eStyled in red, the \u003cb\u003eSPL m1000\u003c\/b\u003e is an analog, mono-block power amplifier. It utilizes a toroidal transformer to foster faithful reproduction at all levels. A custom-made Mundorf coil prevents any oscillation at the power stage, ensuring a wide variety of speakers can be operated.\u003c\/p\u003e\n\u003cp\u003e Power 1000W into 2 Ohms, 750W into 4 Ohms, or 420W into 8-Ohm speakers. You'll find a stepped trim control, as well as protection against DC at the output. An optically controlled limiter kicks in if the level is driven too hot. The limiter's design promotes minimal impact on the sonic signal, since the limiter is controlled in the photo-optical realm, and not the sonic domain.\u003c\/p\u003e\n\u003cp\u003e Neutrik XLR connections are on hand for line inputs and outputs. The input is passively routed to the XLR output in case you want to feed a second power amplifier, so the m1000 can work in bi-wired setups. The speaker connectors themselves are gold-plated binding posts that can accommodate wires up to 4mm, as well as banana plugs.\u003c\/p\u003e\n\u003c\/div\u003e\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eUltra-Compact Power Amplifier\u003c\/h2\u003eThe Performer m1000 amplifier is compact and powerful. Thanks to VOLTAiR technology, this power amplifier can control speakers up to their load limits.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eUp to 1000W\u003c\/h2\u003eDesigned as a mono block amplifier, this bipolar transistor power amplifier delivers up to 1000W into 2 Ohms, 750W into 4 Ohms, and 420W into 8 Ohms.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eToroidal Transformer\u003c\/h2\u003eThe Performer m1000 is equipped with a 1375 VA toroidal transformer, selected after listening tests. The power supply is equipped with a capacitance of 100,000µF for screening and electricity storage, as well as a faithful reproduction of impulse peaks. The toroidal transformer is mounted on a separate mounting plate that sits on 8 rubber dampers to extenuate any mechanical hum noise.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eProtection\u003c\/h2\u003eThe Performer m1000 has a protection circuit against DC (direct current) voltage at the output and a limiter against overloading the output. If DC is detected at the output, the amplifier automatically switches off. To protect the output from overload, a limiter will be deployed in case the input level is so hot that the output stage will overload. The limiter operates with a light-dependent resistor. This means that the regulating process is in the photo-optical domain and does not affect the audio signal.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eCustom Mundorf Coil\u003c\/h2\u003eThe Performer m1000 is equipped with a custom 3,8µH coil, one made by German high-end specialist Mundorf. This coil prevents the possibility of oscillation of the power stage. With the Mundorf coil in place, a huge variety of speakers can be operated seamlessly.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eProcessor Controlled Cooling\u003c\/h2\u003eHeat dissipation is done with a microprocessor-controlled fan cooling that only gets activated when the internal temperature exceeds certain limits. At about 112°F at the heat sink, the amplifier will engage the processor-controlled fan cooling.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eNeutrik I\/Os\u003c\/h2\u003eThe Performer m1000 is equipped with Neutrik XLR input and output connectors for balanced operation. The input signal is passively routed to the output connector to feed any optional, second power amplifier for bi-wiring. The input can be lowered via a Trim rotary switch from 0 dB to -5.5 dB in 0.5 dB steps. This is useful in order to achieve an optimal stereo sweet-spot in acoustically suboptimal rooms. In bi-wiring lineups, or in the studio with multiple speaker sets, the trim allows up to level speakers with different efficiency to equal loudness.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eGold-Plated Binding Posts\u003c\/h2\u003eThe speaker connectors are gold-plated binding posts. The terminals can accommodate both banana plugs as well as a wire of up to 4mm diameter.\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eAmp control\u003c\/h2\u003eThe Performer m1000 has a 3.5mm mono jack designated to be the amplifier control. With the appropriate cable, the Performer can be connected to a preamplifier, so that when you turn the preamplifier on, the amplifier is automatically switched on, too."}

SPL Performer m1000 Mono Power Amplifier (Red)

30%
Vendor: SPL
$3,611.16 $5,158.80
Maximum quantity available reached.

0% interest for 24 months, 24 equal monthly payments;
Approval of ScitScat Music Credit Card required for this offer.

More Info? Please click Here.
Product Description

Styled in red, the SPL m1000 is an analog, mono-block power amplifier. It utilizes a toroidal transformer to foster faithful reproduction at all levels. A custom-made Mundorf coil prevents any oscillation at the power stage, ensuring a wide variety of speakers can be operated.

Power 1000W into 2 Ohms, 750W into 4 Ohms, or 420W into 8-Ohm speakers. You'll find a stepped trim control, as well as protection against DC at the output. An optically controlled limiter kicks in if the level is driven too hot. The limiter's design promotes minimal impact on the sonic signal, since the limiter is controlled in the photo-optical realm, and not the sonic domain.

Neutrik XLR connections are on hand for line inputs and outputs. The input is passively routed to the XLR output in case you want to feed a second power amplifier, so the m1000 can work in bi-wired setups. The speaker connectors themselves are gold-plated binding posts that can accommodate wires up to 4mm, as well as banana plugs.

Ultra-Compact Power Amplifier

The Performer m1000 amplifier is compact and powerful. Thanks to VOLTAiR technology, this power amplifier can control speakers up to their load limits.

Up to 1000W

Designed as a mono block amplifier, this bipolar transistor power amplifier delivers up to 1000W into 2 Ohms, 750W into 4 Ohms, and 420W into 8 Ohms.

Toroidal Transformer

The Performer m1000 is equipped with a 1375 VA toroidal transformer, selected after listening tests. The power supply is equipped with a capacitance of 100,000µF for screening and electricity storage, as well as a faithful reproduction of impulse peaks. The toroidal transformer is mounted on a separate mounting plate that sits on 8 rubber dampers to extenuate any mechanical hum noise.

Protection

The Performer m1000 has a protection circuit against DC (direct current) voltage at the output and a limiter against overloading the output. If DC is detected at the output, the amplifier automatically switches off. To protect the output from overload, a limiter will be deployed in case the input level is so hot that the output stage will overload. The limiter operates with a light-dependent resistor. This means that the regulating process is in the photo-optical domain and does not affect the audio signal.

Custom Mundorf Coil

The Performer m1000 is equipped with a custom 3,8µH coil, one made by German high-end specialist Mundorf. This coil prevents the possibility of oscillation of the power stage. With the Mundorf coil in place, a huge variety of speakers can be operated seamlessly.

Processor Controlled Cooling

Heat dissipation is done with a microprocessor-controlled fan cooling that only gets activated when the internal temperature exceeds certain limits. At about 112°F at the heat sink, the amplifier will engage the processor-controlled fan cooling.

Neutrik I/Os

The Performer m1000 is equipped with Neutrik XLR input and output connectors for balanced operation. The input signal is passively routed to the output connector to feed any optional, second power amplifier for bi-wiring. The input can be lowered via a Trim rotary switch from 0 dB to -5.5 dB in 0.5 dB steps. This is useful in order to achieve an optimal stereo sweet-spot in acoustically suboptimal rooms. In bi-wiring lineups, or in the studio with multiple speaker sets, the trim allows up to level speakers with different efficiency to equal loudness.

Gold-Plated Binding Posts

The speaker connectors are gold-plated binding posts. The terminals can accommodate both banana plugs as well as a wire of up to 4mm diameter.

Amp control

The Performer m1000 has a 3.5mm mono jack designated to be the amplifier control. With the appropriate cable, the Performer can be connected to a preamplifier, so that when you turn the preamplifier on, the amplifier is automatically switched on, too.

Related Products

x