Florida's #1 Source for Pro Audio & Music Recording Equipment:  305-595-3002 /  sales@scitscat.com

Effects & Pedals

Shop the best selection of Effects Pedals at Scitscat Music. Our wide selection of guitar pedals, guitar effects, power supplies, pedal boards and more!

Effects & Pedals

Sort by:
16%
Sale
Radial Engineering OX8 - Eight-Channel Three Way Mic Level Signal Splitter (Eclipse Transformers)
{"id":4691630719065,"title":"Radial Engineering OX8 - Eight-Channel Three Way Mic Level Signal Splitter (Eclipse Transformers)","handle":"radial-engineering-ox8-eight-channel-three-way-mic-level-signal-splitter-eclipse-transformers","description":"\u003cdiv itemprop=\"description\"\u003e\n\u003cp\u003eThe Radial Engineering OX8 is a high-performance 8-channel microphone splitter that lets you send a microphone signal to as many as three consoles at the same time. Each channel is configured with a balanced input, a direct out which also serves as a return path for 48V phantom power, a thru-put with ground lift switch and a transformer isolated output to eliminate hum and buzz, making this tool ultra quiet.\u003c\/p\u003e\n\u003cp\u003eFor maximum flexibility, several connector options are available. Inputs may be accessed via the front panel, using standard XLRs, or the rear panel, with a choice of either 25 pin D-subs (wired to the Tascam standard) or Euro screw-down terminal connectors (Note: Wire-end terminal blocks are sold separately). Outputs include D-subs and Euro connectors, which are also located on the rear panel. These make it easy to connect to popular multi-track recording systems while providing easy termination for permanent installations.\u003c\/p\u003e\n\u003cp\u003eAlthough primarily designed for mic signals, the OX8 is equipped with a -36dB pad to accommodate line level sources, making the OX8 highly adaptable for all types of signal splitting. Several connector options are available to enhance flexibility. Inputs may be accessed via the front panel using standard XLRs, or via the rear panel with a choice of either 25 pin D-subs wired to the ProTools standard or screw-down Phoenix\/Euro terminals which are commonly used in permanent installations.\u003c\/p\u003e\n\u003cp\u003eBecause the OX8 is 100% passive, it does not require any power whatsoever to make it work. You simply plug in and the transformers do all the work. The OX8 comes standard with Eclipse ET-MS10 mic bridging transformers or may be special ordered with premium transformers for the ultimate purist. Each channel is further advantaged with an ultra-short signal path and built in RF filters to ensure absolute quiet performance even in the most noise-prone environments.\u003c\/p\u003e\n\u003cp\u003eThe Radial Engineering OX8 is a professional recording tool that is equally at home in live touring, permanent installations or broadcast. For massive, high-performance routing possibilities, get the OX8 today!\u003c\/p\u003e\n\u003ch2 class=\"type-4\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBalanced 8-channel mic splitter in single space 19\" frame\u003c\/li\u003e\n\u003cli\u003e24 output channels (3 outputs per input)\u003c\/li\u003e\n\u003cli\u003eDelivers exceptional audio without artifact\u003c\/li\u003e\n\u003cli\u003eEliminates hum and buzz caused by ground loops\u003c\/li\u003e\n\u003cli\u003e-36 dB Pad allows for line level inputs\u003c\/li\u003e\n\u003cli\u003eIdeally suited for live recording, PA and broadcast\u003c\/li\u003e\n\u003cli\u003eEquipped with Radial Eclipse MS10 transformers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"type-5\"\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAudio Circuit Type: Passive transformer-based mic level splitter\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTransformer: Radial Eclipse MS10\u003c\/li\u003e\n\u003cli\u003eShield: Durable Faraday, MuMETAL can\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eNumber of Channels: 8 channel 3-way splitter (1-in\/3-out)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz - 18 kHz (+0 dB\/-3 dB)\u003c\/li\u003e\n\u003cli\u003eDynamic Range: 140 dB\u003c\/li\u003e\n\u003cli\u003eTHD + Noise: 0.005% @ 1 kHz\u003c\/li\u003e\n\u003cli\u003ePhase Deviation: 1° @ 100 Hz; 5° @ 20 Hz\u003c\/li\u003e\n\u003cli\u003eCMRR: -114 dB @ 60 Hz\u003c\/li\u003e\n\u003cli\u003eInputs: XLR, Euroblock, DB-25\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance: 150 Ω, balanced\u003c\/li\u003e\n\u003cli\u003eInput Pad: -36 dB (allows line-level sources)\u003c\/li\u003e\n\u003cli\u003eMaximum Input: +2 dBu @ 20 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eOutputs: Euroblock, DB-26\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eOutput Impedance: 150 Ω, balanced\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eGround Lift: Disconnects XLR pin-1 at direct-2 and isolated output\u003c\/li\u003e\n\u003cli\u003eXLR Configuration: AES Standard (pin-2 hot)\u003c\/li\u003e\n\u003cli\u003eDB-25 Configuration: Tascam analog audio standard\u003c\/li\u003e\n\u003cli\u003eConstruction: 14-gauge steel\u003c\/li\u003e\n\u003cli\u003eFinish: Durable powder coat\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D): 1.75\" x 19\" x 6\" (4.45cm x 48.25cm x 15.25cm)\u003c\/li\u003e\n\u003cli\u003eWeight: 7.5 lbs (3.4 kg)\u003c\/li\u003e\n\u003cli\u003eConditions: For use in dry locations only, between 5° C and 40° C\u003c\/li\u003e\n\u003cli\u003eWarranty: Radial 3-year, transferable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T19:48:38-04:00","created_at":"2020-07-29T19:48:38-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":79999,"price_min":79999,"price_max":84999,"available":true,"price_varies":true,"compare_at_price":95000,"compare_at_price_min":95000,"compare_at_price_max":95000,"compare_at_price_varies":false,"variants":[{"id":32081514823769,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 8003-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14559582191705,"product_id":4691630719065,"position":1,"created_at":"2020-07-29T19:49:57-04:00","updated_at":"2020-07-29T19:50:02-04:00","alt":null,"width":472,"height":256,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/345678.jpg?v=1596066602","variant_ids":[32081514823769]},"available":true,"name":"Radial Engineering OX8 - Eight-Channel Three Way Mic Level Signal Splitter (Eclipse Transformers) - NEW","public_title":"NEW","options":["NEW"],"price":84999,"weight":6804,"compare_at_price":95000,"inventory_management":"shopify","barcode":"","featured_media":{"alt":null,"id":6731106943065,"position":1,"preview_image":{"aspect_ratio":1.844,"height":256,"width":472,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/345678.jpg?v=1596066597"}}},{"id":32081514856537,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 8003-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14559582158937,"product_id":4691630719065,"position":2,"created_at":"2020-07-29T19:49:57-04:00","updated_at":"2020-07-29T19:50:02-04:00","alt":null,"width":2000,"height":457,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/345677.jpg?v=1596066602","variant_ids":[32081514856537]},"available":true,"name":"Radial Engineering OX8 - Eight-Channel Three Way Mic Level Signal Splitter (Eclipse Transformers) - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":79999,"weight":6804,"compare_at_price":95000,"inventory_management":"shopify","barcode":"","featured_media":{"alt":null,"id":6731106910297,"position":2,"preview_image":{"aspect_ratio":4.376,"height":457,"width":2000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/345677.jpg?v=1596066597"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/345678.jpg?v=1596066602","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/345677.jpg?v=1596066602"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/345678.jpg?v=1596066602","options":["Title"],"media":[{"alt":null,"id":6731106943065,"position":1,"preview_image":{"aspect_ratio":1.844,"height":256,"width":472,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/345678.jpg?v=1596066597"},"aspect_ratio":1.844,"height":256,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/345678.jpg?v=1596066597","width":472},{"alt":null,"id":6731106910297,"position":2,"preview_image":{"aspect_ratio":4.376,"height":457,"width":2000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/345677.jpg?v=1596066597"},"aspect_ratio":4.376,"height":457,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/345677.jpg?v=1596066597","width":2000}],"content":"\u003cdiv itemprop=\"description\"\u003e\n\u003cp\u003eThe Radial Engineering OX8 is a high-performance 8-channel microphone splitter that lets you send a microphone signal to as many as three consoles at the same time. Each channel is configured with a balanced input, a direct out which also serves as a return path for 48V phantom power, a thru-put with ground lift switch and a transformer isolated output to eliminate hum and buzz, making this tool ultra quiet.\u003c\/p\u003e\n\u003cp\u003eFor maximum flexibility, several connector options are available. Inputs may be accessed via the front panel, using standard XLRs, or the rear panel, with a choice of either 25 pin D-subs (wired to the Tascam standard) or Euro screw-down terminal connectors (Note: Wire-end terminal blocks are sold separately). Outputs include D-subs and Euro connectors, which are also located on the rear panel. These make it easy to connect to popular multi-track recording systems while providing easy termination for permanent installations.\u003c\/p\u003e\n\u003cp\u003eAlthough primarily designed for mic signals, the OX8 is equipped with a -36dB pad to accommodate line level sources, making the OX8 highly adaptable for all types of signal splitting. Several connector options are available to enhance flexibility. Inputs may be accessed via the front panel using standard XLRs, or via the rear panel with a choice of either 25 pin D-subs wired to the ProTools standard or screw-down Phoenix\/Euro terminals which are commonly used in permanent installations.\u003c\/p\u003e\n\u003cp\u003eBecause the OX8 is 100% passive, it does not require any power whatsoever to make it work. You simply plug in and the transformers do all the work. The OX8 comes standard with Eclipse ET-MS10 mic bridging transformers or may be special ordered with premium transformers for the ultimate purist. Each channel is further advantaged with an ultra-short signal path and built in RF filters to ensure absolute quiet performance even in the most noise-prone environments.\u003c\/p\u003e\n\u003cp\u003eThe Radial Engineering OX8 is a professional recording tool that is equally at home in live touring, permanent installations or broadcast. For massive, high-performance routing possibilities, get the OX8 today!\u003c\/p\u003e\n\u003ch2 class=\"type-4\"\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBalanced 8-channel mic splitter in single space 19\" frame\u003c\/li\u003e\n\u003cli\u003e24 output channels (3 outputs per input)\u003c\/li\u003e\n\u003cli\u003eDelivers exceptional audio without artifact\u003c\/li\u003e\n\u003cli\u003eEliminates hum and buzz caused by ground loops\u003c\/li\u003e\n\u003cli\u003e-36 dB Pad allows for line level inputs\u003c\/li\u003e\n\u003cli\u003eIdeally suited for live recording, PA and broadcast\u003c\/li\u003e\n\u003cli\u003eEquipped with Radial Eclipse MS10 transformers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"type-5\"\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAudio Circuit Type: Passive transformer-based mic level splitter\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTransformer: Radial Eclipse MS10\u003c\/li\u003e\n\u003cli\u003eShield: Durable Faraday, MuMETAL can\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eNumber of Channels: 8 channel 3-way splitter (1-in\/3-out)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz - 18 kHz (+0 dB\/-3 dB)\u003c\/li\u003e\n\u003cli\u003eDynamic Range: 140 dB\u003c\/li\u003e\n\u003cli\u003eTHD + Noise: 0.005% @ 1 kHz\u003c\/li\u003e\n\u003cli\u003ePhase Deviation: 1° @ 100 Hz; 5° @ 20 Hz\u003c\/li\u003e\n\u003cli\u003eCMRR: -114 dB @ 60 Hz\u003c\/li\u003e\n\u003cli\u003eInputs: XLR, Euroblock, DB-25\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance: 150 Ω, balanced\u003c\/li\u003e\n\u003cli\u003eInput Pad: -36 dB (allows line-level sources)\u003c\/li\u003e\n\u003cli\u003eMaximum Input: +2 dBu @ 20 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eOutputs: Euroblock, DB-26\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eOutput Impedance: 150 Ω, balanced\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eGround Lift: Disconnects XLR pin-1 at direct-2 and isolated output\u003c\/li\u003e\n\u003cli\u003eXLR Configuration: AES Standard (pin-2 hot)\u003c\/li\u003e\n\u003cli\u003eDB-25 Configuration: Tascam analog audio standard\u003c\/li\u003e\n\u003cli\u003eConstruction: 14-gauge steel\u003c\/li\u003e\n\u003cli\u003eFinish: Durable powder coat\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D): 1.75\" x 19\" x 6\" (4.45cm x 48.25cm x 15.25cm)\u003c\/li\u003e\n\u003cli\u003eWeight: 7.5 lbs (3.4 kg)\u003c\/li\u003e\n\u003cli\u003eConditions: For use in dry locations only, between 5° C and 40° C\u003c\/li\u003e\n\u003cli\u003eWarranty: Radial 3-year, transferable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"}
Radial Engineering OX8 - Eight-Channel Three Way Mic Level Signal Splitter (Eclipse Transformers)

Radial Engineering OX8 - Eight-Channel Three Way Mic Level Signal Splitter (Eclipse Transformers)

$849.99

The Radial Engineering OX8 is a high-performance 8-channel microphone splitter that lets you send a microphone signal to as many as three consoles at the same time. Each channel is configured with a balanced input, a direct out which also serves as a return path for 48V phantom power, a thru-put with ground lift switch and a transformer isolate...

Title

More Info
15%
Sale
Radial Engineering OX8 - Eight-Channel Three Way Mic Level Signal Splitter (Jensen Transformers)
{"id":4691630129241,"title":"Radial Engineering OX8 - Eight-Channel Three Way Mic Level Signal Splitter (Jensen Transformers)","handle":"radial-engineering-ox8-eight-channel-three-way-mic-level-signal-splitter-jensen-transformers","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eRadial Engineering OX8 Eight Channel Mic Splitter\u003c\/b\u003e provides professional level, three-way microphone level signal for professional touring rigs, sound reinforcement installation and more. Eight microphone input channels feature a direct output, isolated output and isolated output with ground lift via Tascam D-Sub and Euroblock connections.\u003c\/p\u003e\n\u003cp\u003eIncoming microphone signal may be split to the FOH console, monitor mixer, in-ear monitor rig, recording devices, etc. The OX8 features pristine signal reproduction and preserves the integrity of the incoming audio signal. Each input also features a 36dB Pad switch that accommodates incoming line level signal sources as well as microphone signal.\u003c\/p\u003e\n\u003cp\u003eThis model features Jensen transformers for even richer fidelity and low noise floor. The OX8 installs into a standard 19-inch rack and does not require external power.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eEight Microphone Channels with Three-Way Splitting\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eIncoming microphone signal may be split to the FOH console, monitor mixer, in-ear monitor rig, recording devices, etc.\u003c\/div\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eTascam D-Sub and Euroblock Outputs\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eEight microphone input channels feature a direct output, isolated output and isolated output with ground lift via Tascam D-Sub and Euroblock connections.\u003c\/div\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003e36dB Pad Switch\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eEach input also features a 36dB Pad switch that accommodates incoming line level signal sources as well as microphone signal.\u003c\/div\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eJensen Transformers\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eThis model features Jensen transformers for even richer fidelity and low noise floor.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T19:47:13-04:00","created_at":"2020-07-29T19:47:11-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":109999,"price_min":109999,"price_max":114999,"available":true,"price_varies":true,"compare_at_price":130000,"compare_at_price_min":130000,"compare_at_price_max":130000,"compare_at_price_varies":false,"variants":[{"id":32081512530009,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 8003-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14559576522841,"product_id":4691630129241,"position":1,"created_at":"2020-07-29T19:47:13-04:00","updated_at":"2020-07-29T19:47:13-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_8004_OX8_Eight_Channel_Three_1233155411_536136.jpg?v=1596066433","variant_ids":[32081512530009]},"available":true,"name":"Radial Engineering OX8 - Eight-Channel Three Way Mic Level Signal Splitter (Jensen Transformers) - NEW","public_title":"NEW","options":["NEW"],"price":114999,"weight":6804,"compare_at_price":130000,"inventory_management":"shopify","barcode":"676101037810","featured_media":{"alt":null,"id":6731101241433,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_8004_OX8_Eight_Channel_Three_1233155411_536136.jpg?v=1596066433"}}},{"id":32081512562777,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 8003-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14559576588377,"product_id":4691630129241,"position":2,"created_at":"2020-07-29T19:47:14-04:00","updated_at":"2020-07-29T19:47:14-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1231944789_IMG_5841.jpg?v=1596066434","variant_ids":[32081512562777]},"available":true,"name":"Radial Engineering OX8 - Eight-Channel Three Way Mic Level Signal Splitter (Jensen Transformers) - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":109999,"weight":6804,"compare_at_price":130000,"inventory_management":"shopify","barcode":"676101037810","featured_media":{"alt":null,"id":6731101274201,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1231944789_IMG_5841.jpg?v=1596066434"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_8004_OX8_Eight_Channel_Three_1233155411_536136.jpg?v=1596066433","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1231944789_IMG_5841.jpg?v=1596066434","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1231944789_IMG_22333.jpg?v=1596066434"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_8004_OX8_Eight_Channel_Three_1233155411_536136.jpg?v=1596066433","options":["Title"],"media":[{"alt":null,"id":6731101241433,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_8004_OX8_Eight_Channel_Three_1233155411_536136.jpg?v=1596066433"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_8004_OX8_Eight_Channel_Three_1233155411_536136.jpg?v=1596066433","width":500},{"alt":null,"id":6731101274201,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1231944789_IMG_5841.jpg?v=1596066434"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1231944789_IMG_5841.jpg?v=1596066434","width":500},{"alt":null,"id":6731101306969,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1231944789_IMG_22333.jpg?v=1596066434"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1231944789_IMG_22333.jpg?v=1596066434","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eRadial Engineering OX8 Eight Channel Mic Splitter\u003c\/b\u003e provides professional level, three-way microphone level signal for professional touring rigs, sound reinforcement installation and more. Eight microphone input channels feature a direct output, isolated output and isolated output with ground lift via Tascam D-Sub and Euroblock connections.\u003c\/p\u003e\n\u003cp\u003eIncoming microphone signal may be split to the FOH console, monitor mixer, in-ear monitor rig, recording devices, etc. The OX8 features pristine signal reproduction and preserves the integrity of the incoming audio signal. Each input also features a 36dB Pad switch that accommodates incoming line level signal sources as well as microphone signal.\u003c\/p\u003e\n\u003cp\u003eThis model features Jensen transformers for even richer fidelity and low noise floor. The OX8 installs into a standard 19-inch rack and does not require external power.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eEight Microphone Channels with Three-Way Splitting\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eIncoming microphone signal may be split to the FOH console, monitor mixer, in-ear monitor rig, recording devices, etc.\u003c\/div\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eTascam D-Sub and Euroblock Outputs\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eEight microphone input channels feature a direct output, isolated output and isolated output with ground lift via Tascam D-Sub and Euroblock connections.\u003c\/div\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003e36dB Pad Switch\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eEach input also features a 36dB Pad switch that accommodates incoming line level signal sources as well as microphone signal.\u003c\/div\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eJensen Transformers\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eThis model features Jensen transformers for even richer fidelity and low noise floor.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering OX8 - Eight-Channel Three Way Mic Level Signal Splitter (Jensen Transformers)

Radial Engineering OX8 - Eight-Channel Three Way Mic Level Signal Splitter (Jensen Transformers)

$1,149.99

The Radial Engineering OX8 Eight Channel Mic Splitter provides professional level, three-way microphone level signal for professional touring rigs, sound reinforcement installation and more. Eight microphone input channels feature a direct output, isolated output and isolated output with ground lift via Tascam D-Sub and Euroblock connections....

Title

More Info
8%
Sale
Radial Engineering Catapult RX4L Cat5/Cat6 Snake for Line-Level Audio Routing (Receiver)
{"id":4691550994521,"title":"Radial Engineering Catapult RX4L Cat5\/Cat6 Snake for Line-Level Audio Routing (Receiver)","handle":"radial-engineering-catapult-rx4l-cat5-cat6-snake-for-line-level-audio-routing-receiver","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eDesigned for use with the TX4L, the \u003cstrong\u003eRadial Engineering Catapult RX4L\u003c\/strong\u003e is a snake which accepts four channels of line-level signal over Cat5\/Cat6 cables, and routes them into the eight XLR jacks provided. Four of the XLR channels are direct outputs, while the other four are isolated. The unit is useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It’s also suitable for system contractors who can utilize the Catapult with pre-wired networks to move audio throughout disparate rooms.\u003c\/p\u003e\n\u003cp\u003eIn addition to the Catapult's XLR terminations, you’ll also note the two RJ45-type etherCON connections. One is a multi-channel input, for use with the TX4L on the transmission end. The other is a throughput, and can be implementing in routing signal to additional Catapults. \u003c\/p\u003e\n\u003cp\u003eWith three different destination pathways possible via the XLR banks and the etherCON throughput, you can split audio to multiple sources, if that's your desire. A ground-lift switch helps eliminate any noise issues on the Cat5\/Cat6 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli class=\"Default\"\u003eGlass-filled, nylon XLR connectors \u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eNickel-silver contacts will not tarnish over time\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e\u003cp\u003eMinimal signal degradation over long cable runs\u003c\/p\u003e\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eLow-noise and flat frequency response\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e4 x XLR through-outputs with line-level transformer isolation for additional routing\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e1 x Ethernet through-output for feeding additional Catapult models\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eProtective steel handle facilitates convenient transportation\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eDurable powder coat\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eGround lift for the Cat5 cable’s ground path to mitigate ground-loop noise\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eDouble-sided, military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eRadial push switches with durable metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T17:09:58-04:00","created_at":"2020-07-29T17:09:58-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":22999,"price_min":22999,"price_max":22999,"available":true,"price_varies":false,"compare_at_price":25000,"compare_at_price_min":25000,"compare_at_price_max":25000,"compare_at_price_varies":false,"variants":[{"id":32081367990361,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"R800 8027","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Radial Engineering Catapult RX4L Cat5\/Cat6 Snake for Line-Level Audio Routing (Receiver)","public_title":null,"options":["Default Title"],"price":22999,"weight":4536,"compare_at_price":25000,"inventory_management":"shopify","barcode":"676101044405"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8027_catapult_rx4l_4_channel_receiver_line_1459783270_1239919.jpg?v=1596057022"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8027_catapult_rx4l_4_channel_receiver_line_1459783270_1239919.jpg?v=1596057022","options":["Title"],"media":[{"alt":null,"id":6730645995609,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8027_catapult_rx4l_4_channel_receiver_line_1459783270_1239919.jpg?v=1596057022"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8027_catapult_rx4l_4_channel_receiver_line_1459783270_1239919.jpg?v=1596057022","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eDesigned for use with the TX4L, the \u003cstrong\u003eRadial Engineering Catapult RX4L\u003c\/strong\u003e is a snake which accepts four channels of line-level signal over Cat5\/Cat6 cables, and routes them into the eight XLR jacks provided. Four of the XLR channels are direct outputs, while the other four are isolated. The unit is useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It’s also suitable for system contractors who can utilize the Catapult with pre-wired networks to move audio throughout disparate rooms.\u003c\/p\u003e\n\u003cp\u003eIn addition to the Catapult's XLR terminations, you’ll also note the two RJ45-type etherCON connections. One is a multi-channel input, for use with the TX4L on the transmission end. The other is a throughput, and can be implementing in routing signal to additional Catapults. \u003c\/p\u003e\n\u003cp\u003eWith three different destination pathways possible via the XLR banks and the etherCON throughput, you can split audio to multiple sources, if that's your desire. A ground-lift switch helps eliminate any noise issues on the Cat5\/Cat6 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli class=\"Default\"\u003eGlass-filled, nylon XLR connectors \u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eNickel-silver contacts will not tarnish over time\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e\u003cp\u003eMinimal signal degradation over long cable runs\u003c\/p\u003e\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eLow-noise and flat frequency response\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e4 x XLR through-outputs with line-level transformer isolation for additional routing\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e1 x Ethernet through-output for feeding additional Catapult models\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eProtective steel handle facilitates convenient transportation\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eDurable powder coat\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eGround lift for the Cat5 cable’s ground path to mitigate ground-loop noise\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eDouble-sided, military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eRadial push switches with durable metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering Catapult RX4L Cat5/Cat6 Snake for Line-Level Audio Routing (Receiver)

Radial Engineering Catapult RX4L Cat5/Cat6 Snake for Line-Level Audio Routing (Receiver)

$229.99

Designed for use with the TX4L, the Radial Engineering Catapult RX4L is a snake which accepts four channels of line-level signal over Cat5/Cat6 cables, and routes them into the eight XLR jacks provided. Four of the XLR channels are direct outputs, while the other four are isolated. The unit is useful in live-sound reinforcement applications, ...


More Info
9%
Sale
Radial Engineering Catapult RX4M Cat5 Snake for Mic-Level Routing (Receiver)
{"id":4691550077017,"title":"Radial Engineering Catapult RX4M Cat5 Snake for Mic-Level Routing (Receiver)","handle":"radial-engineering-catapult-rx4m-cat5-snake-for-mic-level-routing-receiver","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eDesigned for use with the TX4M, the \u003cb\u003eRadial Engineering Catapult RX4M\u003c\/b\u003e is a snake which accepts four channels of mic-level signal over Cat5\/Cat6 cables, and routes them into the eight XLR jacks provided. Four of the XLR channels are direct outputs, while the other four are isolated. The unit is useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It’s also suitable for system contractors who can utilize the Catapult with pre-wired networks to move audio throughout disparate rooms.\u003c\/p\u003e\n\u003cp\u003eThe Catapult RX4M gives you 2 banks of XLR channels, each sporting four channels. Phantom power can be provided over the direct outputs (so long as a shielded Cat5\/Cat6 cable is used), while the mic-level isolation provided helps in eliminating noise issues that can arise from ground loops. You’ll also note the two RJ45-type etherCON connections. One is a multi-channel input, for use with the TX4M on the transmission end. The other is a throughput, and can be implementing in routing signal to additional Catapults.\u003c\/p\u003e\n\u003cp\u003eWith three different destination pathways possible via the XLR banks and the etherCON throughput, you can split audio to multiple sources, if that's your desire. A ground-lift switch helps eliminate any noise issues on the Cat5\/Cat6 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli class=\"Default\"\u003eGlass-filled, nylon XLR connectors that are tougher than steel, providing 100%\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eNickel-silver contacts that don’t tarnish over time\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e\u003cp\u003eMinimal signal degradation over long cable runs\u003c\/p\u003e\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eLow-noise and flat frequency response\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e4 x XLR through-outputs with line-level transformer isolation for additional routing\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e1 x Ethernet through-output for feeding additional Catapult models\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eProtective steel handle facilitates convenient transportation\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eDurable powder coat\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eGround lift for the Cat5 cable’s ground path to mitigate ground-loop noise\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eDouble-sided, military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eRadial push switches with durable metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T17:07:53-04:00","created_at":"2020-07-29T17:07:53-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":24999,"price_min":24999,"price_max":24999,"available":true,"price_varies":false,"compare_at_price":27500,"compare_at_price_min":27500,"compare_at_price_max":27500,"compare_at_price_varies":false,"variants":[{"id":32081366843481,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"R800 8026","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Radial Engineering Catapult RX4M Cat5 Snake for Mic-Level Routing (Receiver)","public_title":null,"options":["Default Title"],"price":24999,"weight":4536,"compare_at_price":27500,"inventory_management":"shopify","barcode":"676101044399"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8025_catapult_rx4_4_channel_receiver_1459783270_1239917.jpg?v=1596056896"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8025_catapult_rx4_4_channel_receiver_1459783270_1239917.jpg?v=1596056896","options":["Title"],"media":[{"alt":null,"id":6730641375321,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8025_catapult_rx4_4_channel_receiver_1459783270_1239917.jpg?v=1596056896"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8025_catapult_rx4_4_channel_receiver_1459783270_1239917.jpg?v=1596056896","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eDesigned for use with the TX4M, the \u003cb\u003eRadial Engineering Catapult RX4M\u003c\/b\u003e is a snake which accepts four channels of mic-level signal over Cat5\/Cat6 cables, and routes them into the eight XLR jacks provided. Four of the XLR channels are direct outputs, while the other four are isolated. The unit is useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It’s also suitable for system contractors who can utilize the Catapult with pre-wired networks to move audio throughout disparate rooms.\u003c\/p\u003e\n\u003cp\u003eThe Catapult RX4M gives you 2 banks of XLR channels, each sporting four channels. Phantom power can be provided over the direct outputs (so long as a shielded Cat5\/Cat6 cable is used), while the mic-level isolation provided helps in eliminating noise issues that can arise from ground loops. You’ll also note the two RJ45-type etherCON connections. One is a multi-channel input, for use with the TX4M on the transmission end. The other is a throughput, and can be implementing in routing signal to additional Catapults.\u003c\/p\u003e\n\u003cp\u003eWith three different destination pathways possible via the XLR banks and the etherCON throughput, you can split audio to multiple sources, if that's your desire. A ground-lift switch helps eliminate any noise issues on the Cat5\/Cat6 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli class=\"Default\"\u003eGlass-filled, nylon XLR connectors that are tougher than steel, providing 100%\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eNickel-silver contacts that don’t tarnish over time\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e\u003cp\u003eMinimal signal degradation over long cable runs\u003c\/p\u003e\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eLow-noise and flat frequency response\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e4 x XLR through-outputs with line-level transformer isolation for additional routing\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e1 x Ethernet through-output for feeding additional Catapult models\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eProtective steel handle facilitates convenient transportation\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eDurable powder coat\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eGround lift for the Cat5 cable’s ground path to mitigate ground-loop noise\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003e4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eDouble-sided, military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference\u003cp\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"Default\"\u003eRadial push switches with durable metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering Catapult RX4M Cat5 Snake for Mic-Level Routing (Receiver)

Radial Engineering Catapult RX4M Cat5 Snake for Mic-Level Routing (Receiver)

$249.99

Designed for use with the TX4M, the Radial Engineering Catapult RX4M is a snake which accepts four channels of mic-level signal over Cat5/Cat6 cables, and routes them into the eight XLR jacks provided. Four of the XLR channels are direct outputs, while the other four are isolated. The unit is useful in live-sound reinforcement applications, a...


More Info
7%
Sale
Radial Engineering Catapult RX4 Cat 5Snake for Audio/AES Routing (Receiver)
{"id":4691547390041,"title":"Radial Engineering Catapult RX4 Cat 5Snake for Audio\/AES Routing (Receiver)","handle":"radial-engineering-catapult-rx4-cat-5snake-for-audio-aes-routing-receiver","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eDesigned for use with the TX4, the \u003cstrong\u003eRadial Engineering Catapult RX4\u003c\/strong\u003e is a snake which accepts four channels of analog or AES audio signal over Ethernet, and routes them into the eight XLR jacks provided. It's useful in live-sound reinforcement applications, as it allows live-sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It’s also suitable for system contractors, who can now utilize pre-wired networks to move audio throughout disparate rooms.\u003c\/p\u003e\n\u003cp\u003eThe Catapult RX4 gives you 2 banks of XLR channels, each sporting four channels. Thus, you can split audio to multiple sources, if that's your desire. You'll also note the two RJ45-type EtherCON connections. One is a multi-channel input, for use with the TX4 on the transmission end. The other is a through-put, and can be implemented in routing signals to additional Catapults. A ground-lift switch helps in eliminating any noise issues on the Cat 5 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eGlass-filled nylon XLR connectors \u003c\/li\u003e\n\u003cli\u003eNickel-silver contacts\u003c\/li\u003e\n\u003cli\u003eMinimal signal degradation over long cable runs\u003c\/li\u003e\n\u003cli\u003eLow-noise and flat frequency response\u003c\/li\u003e\n\u003cli\u003e4 x XLR through-outputs for additional routing\u003c\/li\u003e\n\u003cli\u003e1 x Ethernet through-output for feeding additional Catapult models\u003c\/li\u003e\n\u003cli\u003eProtective steel handle facilitates convenient transportation\u003c\/li\u003e\n\u003cli\u003eDurable powder coat\u003c\/li\u003e\n\u003cli\u003eGround lift for the Cat 5 cable's ground path to mitigate ground-loop noise\u003c\/li\u003e\n\u003cli\u003e4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage\u003c\/li\u003e\n\u003cli\u003eDouble-sided military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference\u003c\/li\u003e\n\u003cli\u003eRadial push switches with durable metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T17:05:37-04:00","created_at":"2020-07-29T17:05:37-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":13999,"price_min":13999,"price_max":13999,"available":true,"price_varies":false,"compare_at_price":15000,"compare_at_price_min":15000,"compare_at_price_max":15000,"compare_at_price_varies":false,"variants":[{"id":32081362616409,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"R800 8025","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Radial Engineering Catapult RX4 Cat 5Snake for Audio\/AES Routing (Receiver)","public_title":null,"options":["Default Title"],"price":13999,"weight":4536,"compare_at_price":15000,"inventory_management":"shopify","barcode":"676101044382"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1459783270_1239915.jpg?v=1596056798"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1459783270_1239915.jpg?v=1596056798","options":["Title"],"media":[{"alt":null,"id":6730636886105,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2500,"width":2500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1459783270_1239915.jpg?v=1596056798"},"aspect_ratio":1.0,"height":2500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1459783270_1239915.jpg?v=1596056798","width":2500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eDesigned for use with the TX4, the \u003cstrong\u003eRadial Engineering Catapult RX4\u003c\/strong\u003e is a snake which accepts four channels of analog or AES audio signal over Ethernet, and routes them into the eight XLR jacks provided. It's useful in live-sound reinforcement applications, as it allows live-sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It’s also suitable for system contractors, who can now utilize pre-wired networks to move audio throughout disparate rooms.\u003c\/p\u003e\n\u003cp\u003eThe Catapult RX4 gives you 2 banks of XLR channels, each sporting four channels. Thus, you can split audio to multiple sources, if that's your desire. You'll also note the two RJ45-type EtherCON connections. One is a multi-channel input, for use with the TX4 on the transmission end. The other is a through-put, and can be implemented in routing signals to additional Catapults. A ground-lift switch helps in eliminating any noise issues on the Cat 5 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eGlass-filled nylon XLR connectors \u003c\/li\u003e\n\u003cli\u003eNickel-silver contacts\u003c\/li\u003e\n\u003cli\u003eMinimal signal degradation over long cable runs\u003c\/li\u003e\n\u003cli\u003eLow-noise and flat frequency response\u003c\/li\u003e\n\u003cli\u003e4 x XLR through-outputs for additional routing\u003c\/li\u003e\n\u003cli\u003e1 x Ethernet through-output for feeding additional Catapult models\u003c\/li\u003e\n\u003cli\u003eProtective steel handle facilitates convenient transportation\u003c\/li\u003e\n\u003cli\u003eDurable powder coat\u003c\/li\u003e\n\u003cli\u003eGround lift for the Cat 5 cable's ground path to mitigate ground-loop noise\u003c\/li\u003e\n\u003cli\u003e4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage\u003c\/li\u003e\n\u003cli\u003eDouble-sided military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference\u003c\/li\u003e\n\u003cli\u003eRadial push switches with durable metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering Catapult RX4 Cat 5Snake for Audio/AES Routing (Receiver)

Radial Engineering Catapult RX4 Cat 5Snake for Audio/AES Routing (Receiver)

$139.99

Designed for use with the TX4, the Radial Engineering Catapult RX4 is a snake which accepts four channels of analog or AES audio signal over Ethernet, and routes them into the eight XLR jacks provided. It's useful in live-sound reinforcement applications, as it allows live-sound stage techs to use relatively affordable cable to secure quality...


More Info
8%
Sale
Radial Engineering Catapult TX4L 4-Channel for Line-Level Signal Routing over Cat5/6 (Transmitter)
{"id":4691544801369,"title":"Radial Engineering Catapult TX4L 4-Channel for Line-Level Signal Routing over Cat5\/6 (Transmitter)","handle":"radial-engineering-catapult-tx4l-4-channel-for-line-level-signal-routing-over-cat5-6-transmitter","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadial Engineering Catapult TX4L \u003c\/strong\u003eis a four-channel snake that is designed to route four channels of line-level signal across long distances using shielded Cat5\/Cat6 cable, doing so with little to no signal degradation. As such, it’s useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It’s also suitable for system contractors who can now utilize pre-wired networks to move audio throughout disparate rooms.\u003c\/p\u003e\n\u003cp\u003eThe Catapult TX4L gives you four XLR input jacks, as well as four XLR transformer-balanced through-outputs optimized for line-level signal. You’ll also note the two RJ45-type etherCON connections. One is an output, for use with the RX4L on the receiving end. The other is a throughput, and can be implementing in routing signal to additional Catapults. In total, you'll have the ability to split and route line-level signal to three different locations.\u003c\/p\u003e\n\u003cp\u003eA ground-lift switch helps eliminate any noise issues on the Cat5 or Cat6 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eGlass-filled, nylon XLR connectors \u003c\/li\u003e\n\u003cli\u003eNickel-silver contacts \u003c\/li\u003e\n\u003cli\u003e4 x XLR through-outputs with line-level transformer isolation for additional routing\u003c\/li\u003e\n\u003cli\u003e1 x Ethernet through-output for feeding additional Catapult models\u003c\/li\u003e\n\u003cli\u003eProtective steel handle facilitates convenient transportation\u003c\/li\u003e\n\u003cli\u003eDurable powder coat\u003c\/li\u003e\n\u003cli\u003eGround lift for the Cat5\/Cat6 cable’s ground path to mitigate ground-loop noise\u003c\/li\u003e\n\u003cli\u003e4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage\u003c\/li\u003e\n\u003cli\u003eDouble-sided, military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference\u003c\/li\u003e\n\u003cli\u003eRadial push switches with durable metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T17:02:24-04:00","created_at":"2020-07-29T17:02:24-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":22999,"price_min":22999,"price_max":22999,"available":true,"price_varies":false,"compare_at_price":25000,"compare_at_price_min":25000,"compare_at_price_max":25000,"compare_at_price_varies":false,"variants":[{"id":32081355833433,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"R800 8024","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Radial Engineering Catapult TX4L 4-Channel for Line-Level Signal Routing over Cat5\/6 (Transmitter)","public_title":null,"options":["Default Title"],"price":22999,"weight":4536,"compare_at_price":25000,"inventory_management":"shopify","barcode":"676101044375"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/71hjC5iejSL._AC_SL1500.jpg?v=1596056685"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/71hjC5iejSL._AC_SL1500.jpg?v=1596056685","options":["Title"],"media":[{"alt":null,"id":6730630496345,"position":1,"preview_image":{"aspect_ratio":1.863,"height":805,"width":1500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/71hjC5iejSL._AC_SL1500.jpg?v=1596056685"},"aspect_ratio":1.863,"height":805,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/71hjC5iejSL._AC_SL1500.jpg?v=1596056685","width":1500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadial Engineering Catapult TX4L \u003c\/strong\u003eis a four-channel snake that is designed to route four channels of line-level signal across long distances using shielded Cat5\/Cat6 cable, doing so with little to no signal degradation. As such, it’s useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It’s also suitable for system contractors who can now utilize pre-wired networks to move audio throughout disparate rooms.\u003c\/p\u003e\n\u003cp\u003eThe Catapult TX4L gives you four XLR input jacks, as well as four XLR transformer-balanced through-outputs optimized for line-level signal. You’ll also note the two RJ45-type etherCON connections. One is an output, for use with the RX4L on the receiving end. The other is a throughput, and can be implementing in routing signal to additional Catapults. In total, you'll have the ability to split and route line-level signal to three different locations.\u003c\/p\u003e\n\u003cp\u003eA ground-lift switch helps eliminate any noise issues on the Cat5 or Cat6 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eGlass-filled, nylon XLR connectors \u003c\/li\u003e\n\u003cli\u003eNickel-silver contacts \u003c\/li\u003e\n\u003cli\u003e4 x XLR through-outputs with line-level transformer isolation for additional routing\u003c\/li\u003e\n\u003cli\u003e1 x Ethernet through-output for feeding additional Catapult models\u003c\/li\u003e\n\u003cli\u003eProtective steel handle facilitates convenient transportation\u003c\/li\u003e\n\u003cli\u003eDurable powder coat\u003c\/li\u003e\n\u003cli\u003eGround lift for the Cat5\/Cat6 cable’s ground path to mitigate ground-loop noise\u003c\/li\u003e\n\u003cli\u003e4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage\u003c\/li\u003e\n\u003cli\u003eDouble-sided, military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference\u003c\/li\u003e\n\u003cli\u003eRadial push switches with durable metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering Catapult TX4L 4-Channel for Line-Level Signal Routing over Cat5/6 (Transmitter)

Radial Engineering Catapult TX4L 4-Channel for Line-Level Signal Routing over Cat5/6 (Transmitter)

$229.99

The Radial Engineering Catapult TX4L is a four-channel snake that is designed to route four channels of line-level signal across long distances using shielded Cat5/Cat6 cable, doing so with little to no signal degradation. As such, it’s useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affo...


More Info
9%
Sale
Radial Engineering Catapult TX4M 4-Channel for Microphone Signal Routing over Cat5/6 (Transmitter)
{"id":4691543130201,"title":"Radial Engineering Catapult TX4M 4-Channel for Microphone Signal Routing over Cat5\/6 (Transmitter)","handle":"radial-engineering-catapult-tx4m-4-channel-for-microphone-signal-routing-over-cat5-6-transmitter","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadial Engineering Catapult TX4M \u003c\/strong\u003eis a four-channel snake that is designed to route four channels of mic-level signal across long distances using shielded Cat5\/Cat6 cable, doing so with little to no signal degradation. As such, it’s useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It’s also suitable for system contractors who can now utilize pre-wired networks to move audio throughout disparate rooms.\u003c\/p\u003e\n\u003cp\u003eThe Catapult TX4M gives you four XLR input jacks, as well as four XLR transformer-balanced through-outputs optimized for mic-level signal. You can run phantom power over the snake as long as you use a shielded Cat5 cable. You’ll also note the two RJ45-type etherCON connections. One is an output, for use with the RX4M on the receiving end. The other is a throughput, and can be implementing in routing signal to additional Catapults. In total, you'll have the ability to split and route mic-level signal to three different locations.\u003c\/p\u003e\n\u003cp\u003eA ground-lift switch helps eliminate any noise issues on the Cat5 or Cat6 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eGlass-filled, nylon XLR connectors \u003c\/li\u003e\n\u003cli\u003eNickel-silver contacts \u003c\/li\u003e\n\u003cli\u003e4 x XLR through-outputs with mic-level transformer isolation for additional routing\u003c\/li\u003e\n\u003cli\u003e1 x Ethernet through-output for feeding additional Catapult models\u003c\/li\u003e\n\u003cli\u003eProtective steel handle facilitates convenient transportation\u003c\/li\u003e\n\u003cli\u003eDurable powder coat\u003c\/li\u003e\n\u003cli\u003eGround lift for the Cat5\/Cat6 cable’s ground path to mitigate ground-loop noise\u003c\/li\u003e\n\u003cli\u003e4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage\u003c\/li\u003e\n\u003cli\u003eDouble-sided, military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference\u003c\/li\u003e\n\u003cli\u003eRadial push switches with durable metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T17:00:11-04:00","created_at":"2020-07-29T17:00:11-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":24999,"price_min":24999,"price_max":24999,"available":true,"price_varies":false,"compare_at_price":27500,"compare_at_price_min":27500,"compare_at_price_max":27500,"compare_at_price_varies":false,"variants":[{"id":32081350393945,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"R800 8023","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Radial Engineering Catapult TX4M 4-Channel for Microphone Signal Routing over Cat5\/6 (Transmitter)","public_title":null,"options":["Default Title"],"price":24999,"weight":4536,"compare_at_price":27500,"inventory_management":"shopify","barcode":"676101044368"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8023_catapult_tx4m_4_channel_transmitter_mic_1459783270_1239915.jpg?v=1596056492"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8023_catapult_tx4m_4_channel_transmitter_mic_1459783270_1239915.jpg?v=1596056492","options":["Title"],"media":[{"alt":null,"id":6730618732633,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8023_catapult_tx4m_4_channel_transmitter_mic_1459783270_1239915.jpg?v=1596056492"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8023_catapult_tx4m_4_channel_transmitter_mic_1459783270_1239915.jpg?v=1596056492","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadial Engineering Catapult TX4M \u003c\/strong\u003eis a four-channel snake that is designed to route four channels of mic-level signal across long distances using shielded Cat5\/Cat6 cable, doing so with little to no signal degradation. As such, it’s useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It’s also suitable for system contractors who can now utilize pre-wired networks to move audio throughout disparate rooms.\u003c\/p\u003e\n\u003cp\u003eThe Catapult TX4M gives you four XLR input jacks, as well as four XLR transformer-balanced through-outputs optimized for mic-level signal. You can run phantom power over the snake as long as you use a shielded Cat5 cable. You’ll also note the two RJ45-type etherCON connections. One is an output, for use with the RX4M on the receiving end. The other is a throughput, and can be implementing in routing signal to additional Catapults. In total, you'll have the ability to split and route mic-level signal to three different locations.\u003c\/p\u003e\n\u003cp\u003eA ground-lift switch helps eliminate any noise issues on the Cat5 or Cat6 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eGlass-filled, nylon XLR connectors \u003c\/li\u003e\n\u003cli\u003eNickel-silver contacts \u003c\/li\u003e\n\u003cli\u003e4 x XLR through-outputs with mic-level transformer isolation for additional routing\u003c\/li\u003e\n\u003cli\u003e1 x Ethernet through-output for feeding additional Catapult models\u003c\/li\u003e\n\u003cli\u003eProtective steel handle facilitates convenient transportation\u003c\/li\u003e\n\u003cli\u003eDurable powder coat\u003c\/li\u003e\n\u003cli\u003eGround lift for the Cat5\/Cat6 cable’s ground path to mitigate ground-loop noise\u003c\/li\u003e\n\u003cli\u003e4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage\u003c\/li\u003e\n\u003cli\u003eDouble-sided, military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference\u003c\/li\u003e\n\u003cli\u003eRadial push switches with durable metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering Catapult TX4M 4-Channel for Microphone Signal Routing over Cat5/6 (Transmitter)

Radial Engineering Catapult TX4M 4-Channel for Microphone Signal Routing over Cat5/6 (Transmitter)

$249.99

The Radial Engineering Catapult TX4M is a four-channel snake that is designed to route four channels of mic-level signal across long distances using shielded Cat5/Cat6 cable, doing so with little to no signal degradation. As such, it’s useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affor...


More Info
7%
Sale
Radial Engineering Catapult TX4 4-Channel Cat 5 Snake for Audio/AES Routing (Transmitter)
{"id":4691542081625,"title":"Radial Engineering Catapult TX4 4-Channel Cat 5 Snake for Audio\/AES Routing (Transmitter)","handle":"radial-engineering-catapult-tx4-4-channel-cat-5-snake-for-audio-aes-routing-transmitter","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadial Engineering Catapult TX4 \u003c\/strong\u003eis a four-channel snake which allows you to route four XLR connections across long distances using Cat 5 or Cat 6 cable, doing so with little to no signal degradation. As such, it's useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It's also suitable for system contractors, who can now utilize pre-wired networks to move audio throughout disparate rooms.\u003c\/p\u003e\n\u003cp\u003eThe Catapult TX4 gives you four XLR input jacks, as well as four XLR transformer-balanced through-outputs for routing both analog or AES audio to other compatible sources. You'll also note the two RJ45-type Ethercon connections. One is an output, for use with the RX4 on the receiving end. The other is a thru-put, and can be implementing in routing signal to additional Catapults. A ground-lift switch helps eliminate any noise issues on the Cat 5 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eGlass-filled nylon XLR connectors \u003c\/li\u003e\n\u003cli\u003eNickel-silver contacts;\u003c\/li\u003e\n\u003cli\u003e4 x XLR through-outputs for additional routing\u003c\/li\u003e\n\u003cli\u003e1 x Ethernet through-output for feeding additional Catapult models\u003c\/li\u003e\n\u003cli\u003eProtective steel handle facilitates convenient transportation\u003c\/li\u003e\n\u003cli\u003eDurable powder coat\u003c\/li\u003e\n\u003cli\u003eGround lift for the Cat 5 cable's ground path to mitigate ground-loop noise\u003c\/li\u003e\n\u003cli\u003e4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage\u003c\/li\u003e\n\u003cli\u003eDouble-sided military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference\u003c\/li\u003e\n\u003cli\u003eRadial push switches with durable metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T16:58:40-04:00","created_at":"2020-07-29T16:58:39-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":13999,"price_min":13999,"price_max":13999,"available":true,"price_varies":false,"compare_at_price":15000,"compare_at_price_min":15000,"compare_at_price_max":15000,"compare_at_price_varies":false,"variants":[{"id":32081346592857,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"R800 8022","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Radial Engineering Catapult TX4 4-Channel Cat 5 Snake for Audio\/AES Routing (Transmitter)","public_title":null,"options":["Default Title"],"price":13999,"weight":0,"compare_at_price":15000,"inventory_management":"shopify","barcode":"676101044351"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8022_catapult_tx4_4_channel_transmitter_1463395508_1239914.jpg?v=1596056320"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8022_catapult_tx4_4_channel_transmitter_1463395508_1239914.jpg?v=1596056320","options":["Title"],"media":[{"alt":null,"id":6730608640089,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8022_catapult_tx4_4_channel_transmitter_1463395508_1239914.jpg?v=1596056320"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8022_catapult_tx4_4_channel_transmitter_1463395508_1239914.jpg?v=1596056320","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadial Engineering Catapult TX4 \u003c\/strong\u003eis a four-channel snake which allows you to route four XLR connections across long distances using Cat 5 or Cat 6 cable, doing so with little to no signal degradation. As such, it's useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It's also suitable for system contractors, who can now utilize pre-wired networks to move audio throughout disparate rooms.\u003c\/p\u003e\n\u003cp\u003eThe Catapult TX4 gives you four XLR input jacks, as well as four XLR transformer-balanced through-outputs for routing both analog or AES audio to other compatible sources. You'll also note the two RJ45-type Ethercon connections. One is an output, for use with the RX4 on the receiving end. The other is a thru-put, and can be implementing in routing signal to additional Catapults. A ground-lift switch helps eliminate any noise issues on the Cat 5 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eGlass-filled nylon XLR connectors \u003c\/li\u003e\n\u003cli\u003eNickel-silver contacts;\u003c\/li\u003e\n\u003cli\u003e4 x XLR through-outputs for additional routing\u003c\/li\u003e\n\u003cli\u003e1 x Ethernet through-output for feeding additional Catapult models\u003c\/li\u003e\n\u003cli\u003eProtective steel handle facilitates convenient transportation\u003c\/li\u003e\n\u003cli\u003eDurable powder coat\u003c\/li\u003e\n\u003cli\u003eGround lift for the Cat 5 cable's ground path to mitigate ground-loop noise\u003c\/li\u003e\n\u003cli\u003e4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage\u003c\/li\u003e\n\u003cli\u003eDouble-sided military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference\u003c\/li\u003e\n\u003cli\u003eRadial push switches with durable metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering Catapult TX4 4-Channel Cat 5 Snake for Audio/AES Routing (Transmitter)

Radial Engineering Catapult TX4 4-Channel Cat 5 Snake for Audio/AES Routing (Transmitter)

$139.99

The Radial Engineering Catapult TX4 is a four-channel snake which allows you to route four XLR connections across long distances using Cat 5 or Cat 6 cable, doing so with little to no signal degradation. As such, it's useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affordable cable to sec...


More Info
15%
Sale
Radial Engineering LX8 Line Level Signal Splitter & Isolator
{"id":4691495944281,"title":"Radial Engineering LX8 Line Level Signal Splitter \u0026 Isolator","handle":"radial-engineering-lx8-line-level-signal-splitter-isolator","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eLX8 Line Level Signal Splitter \u0026amp; Isolator \u003c\/strong\u003efrom\u003cstrong\u003e Radial Engineering \u003c\/strong\u003eis an 8-channel passive line-level isolator, designed specifically to manage balanced signals in professional audio systems. Applications include splitting a source between 2 destinations or simply isolating devices to eliminate the hum and buzz caused by ground loops.\u003c\/p\u003e\n\u003cp\u003eThe single rack space design begins with 100% passive circuit which means it does not require any powering whatsoever to make it work. In this unit, each of the 8 channels is equipped with a premium Eclipse ET-LD4 transformer that is able to handle transients in excess of +26dB at all frequencies right down to 20Hz without audible distortion. This results in an accurate signal transfer with minimal phase shift or artifact. In the studio, the Eclipse transformer delivers added warmth and a natural vintage-sounding compression. When used in larger systems, you benefit from significantly lower noise.\u003c\/p\u003e\n\u003cp\u003eInput connections include a series of front-panel XLRs for easy integration into live racks or a rear-mounted 25-pin D-sub. Output connections include a hardwire throughput, a transformer isolated output, and an auxiliary output, the latter 2 being equipped with ground lift switches to help eliminate hum and buzz caused by ground loops. All rear panel connections are presented with a choice of standard 25-pin D-Sub wired to the Tascam-ProTools standard or with screw-down Phoenix connectors for easy field termination for permanent installations.\u003c\/p\u003e\n\u003cp\u003eAll of the 8 incoming signals are routed to the direct output, the transformer isolated output, and an auxiliary out, enabling multiple signal paths to be put into practice without the usual noise that is associated. With all these features, it is suitable for use with most demanding multi-channel audio system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"note_2g6LBzXiJpmArOmRfXfXQY\"\u003e\n\u003cstrong\u003e\u003cem\u003e\u003cspan class=\"noteInner_3qyovzAqZIkWhs7TqzfmER\" data-selenium=\"overviewProductNote\"\u003eNote: \u003c\/span\u003eThe Phoenix cable terminal connectors are sold separately\u003cspan class=\"noteInner_3qyovzAqZIkWhs7TqzfmER\" data-selenium=\"overviewProductNote\"\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eGeneral\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8-channel balanced line level-signal splitter \u0026amp; isolator\u003c\/li\u003e\n\u003cli\u003eHandles +26 dB signals without distortion or artifact\u003c\/li\u003e\n\u003cli\u003eOver 100 dB of common mode noise rejection\u003c\/li\u003e\n\u003cli\u003eEliminates hum and buzz caused by ground loops\u003c\/li\u003e\n\u003cli\u003eWelded 14-guage steel heavy-duty construction for durability\u003c\/li\u003e\n\u003cli\u003eBased enamel finish for longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"descriptionAsTitle_18Nt9BkVcYQO2jcxURBPUl\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eFront Panel\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eXLR line input (600Ω, balanced) wired in parallel with the rear panel D-Sub\u003c\/li\u003e\n\u003cli\u003eID labels for wax pencil make setup easy\u003c\/li\u003e\n\u003cli\u003eISO ground lift disconnects the ground on the isolated D-Sub output to help eliminate ground loops\u003c\/li\u003e\n\u003cli\u003eAux ground lift disconnects the ground on the auxiliary D-Sub output to help eliminate ground loops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"descriptionAsTitle_18Nt9BkVcYQO2jcxURBPUl\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eRear Panel\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIsolated output set offers choice of 25-pin D-Sub connector for 8-channel cable harness or Phoenix Euroblock connection for permanent installation\u003c\/li\u003e\n\u003cli\u003eAuxiliary direct output with front panel ground lift switch allows hard-wire passive split for monitors, broadcasts, or PA\u003c\/li\u003e\n\u003cli\u003eDirect output is coupled with the input for direct feed through\u003c\/li\u003e\n\u003cli\u003eRear panel includes pin-out diagram for the Tascam standard 25-pin D-Sub connector\u003c\/li\u003e\n\u003cli\u003eBalanced input with choice of 25-pin D-Sub, Phoenix Euroblock, or front panel XLR connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T13:53:34-04:00","created_at":"2020-07-29T13:53:34-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":109999,"price_min":109999,"price_max":114999,"available":true,"price_varies":true,"compare_at_price":130000,"compare_at_price_min":130000,"compare_at_price_max":130000,"compare_at_price_varies":false,"variants":[{"id":32081163583577,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 8200-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14558664261721,"product_id":4691495944281,"position":1,"created_at":"2020-07-29T13:56:34-04:00","updated_at":"2020-07-29T13:56:34-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8200_lx8_line_level_signal_1363255895_536139.jpg?v=1596045394","variant_ids":[32081163583577]},"available":true,"name":"Radial Engineering LX8 Line Level Signal Splitter \u0026 Isolator - NEW","public_title":"NEW","options":["NEW"],"price":114999,"weight":6804,"compare_at_price":130000,"inventory_management":"shopify","barcode":"676101038466","featured_media":{"alt":null,"id":6730188390489,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8200_lx8_line_level_signal_1363255895_536139.jpg?v=1596045394"}}},{"id":32081163616345,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 8200-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14558664327257,"product_id":4691495944281,"position":2,"created_at":"2020-07-29T13:56:35-04:00","updated_at":"2020-07-29T13:59:49-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363255802_IMG_308249.jpg?v=1596045589","variant_ids":[32081163616345]},"available":true,"name":"Radial Engineering LX8 Line Level Signal Splitter \u0026 Isolator - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":109999,"weight":6804,"compare_at_price":130000,"inventory_management":"shopify","barcode":"676101038466","featured_media":{"alt":null,"id":6730188456025,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363255802_IMG_308249.jpg?v=1596045395"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8200_lx8_line_level_signal_1363255895_536139.jpg?v=1596045394","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363255802_IMG_308249.jpg?v=1596045589","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363255802_IMG_308250.jpg?v=1596045589"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8200_lx8_line_level_signal_1363255895_536139.jpg?v=1596045394","options":["Title"],"media":[{"alt":null,"id":6730188390489,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8200_lx8_line_level_signal_1363255895_536139.jpg?v=1596045394"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8200_lx8_line_level_signal_1363255895_536139.jpg?v=1596045394","width":500},{"alt":null,"id":6730188456025,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363255802_IMG_308249.jpg?v=1596045395"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363255802_IMG_308249.jpg?v=1596045395","width":500},{"alt":null,"id":6730188423257,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363255802_IMG_308250.jpg?v=1596045394"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363255802_IMG_308250.jpg?v=1596045394","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eLX8 Line Level Signal Splitter \u0026amp; Isolator \u003c\/strong\u003efrom\u003cstrong\u003e Radial Engineering \u003c\/strong\u003eis an 8-channel passive line-level isolator, designed specifically to manage balanced signals in professional audio systems. Applications include splitting a source between 2 destinations or simply isolating devices to eliminate the hum and buzz caused by ground loops.\u003c\/p\u003e\n\u003cp\u003eThe single rack space design begins with 100% passive circuit which means it does not require any powering whatsoever to make it work. In this unit, each of the 8 channels is equipped with a premium Eclipse ET-LD4 transformer that is able to handle transients in excess of +26dB at all frequencies right down to 20Hz without audible distortion. This results in an accurate signal transfer with minimal phase shift or artifact. In the studio, the Eclipse transformer delivers added warmth and a natural vintage-sounding compression. When used in larger systems, you benefit from significantly lower noise.\u003c\/p\u003e\n\u003cp\u003eInput connections include a series of front-panel XLRs for easy integration into live racks or a rear-mounted 25-pin D-sub. Output connections include a hardwire throughput, a transformer isolated output, and an auxiliary output, the latter 2 being equipped with ground lift switches to help eliminate hum and buzz caused by ground loops. All rear panel connections are presented with a choice of standard 25-pin D-Sub wired to the Tascam-ProTools standard or with screw-down Phoenix connectors for easy field termination for permanent installations.\u003c\/p\u003e\n\u003cp\u003eAll of the 8 incoming signals are routed to the direct output, the transformer isolated output, and an auxiliary out, enabling multiple signal paths to be put into practice without the usual noise that is associated. With all these features, it is suitable for use with most demanding multi-channel audio system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"note_2g6LBzXiJpmArOmRfXfXQY\"\u003e\n\u003cstrong\u003e\u003cem\u003e\u003cspan class=\"noteInner_3qyovzAqZIkWhs7TqzfmER\" data-selenium=\"overviewProductNote\"\u003eNote: \u003c\/span\u003eThe Phoenix cable terminal connectors are sold separately\u003cspan class=\"noteInner_3qyovzAqZIkWhs7TqzfmER\" data-selenium=\"overviewProductNote\"\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eGeneral\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8-channel balanced line level-signal splitter \u0026amp; isolator\u003c\/li\u003e\n\u003cli\u003eHandles +26 dB signals without distortion or artifact\u003c\/li\u003e\n\u003cli\u003eOver 100 dB of common mode noise rejection\u003c\/li\u003e\n\u003cli\u003eEliminates hum and buzz caused by ground loops\u003c\/li\u003e\n\u003cli\u003eWelded 14-guage steel heavy-duty construction for durability\u003c\/li\u003e\n\u003cli\u003eBased enamel finish for longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"descriptionAsTitle_18Nt9BkVcYQO2jcxURBPUl\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eFront Panel\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eXLR line input (600Ω, balanced) wired in parallel with the rear panel D-Sub\u003c\/li\u003e\n\u003cli\u003eID labels for wax pencil make setup easy\u003c\/li\u003e\n\u003cli\u003eISO ground lift disconnects the ground on the isolated D-Sub output to help eliminate ground loops\u003c\/li\u003e\n\u003cli\u003eAux ground lift disconnects the ground on the auxiliary D-Sub output to help eliminate ground loops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"descriptionAsTitle_18Nt9BkVcYQO2jcxURBPUl\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eRear Panel\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIsolated output set offers choice of 25-pin D-Sub connector for 8-channel cable harness or Phoenix Euroblock connection for permanent installation\u003c\/li\u003e\n\u003cli\u003eAuxiliary direct output with front panel ground lift switch allows hard-wire passive split for monitors, broadcasts, or PA\u003c\/li\u003e\n\u003cli\u003eDirect output is coupled with the input for direct feed through\u003c\/li\u003e\n\u003cli\u003eRear panel includes pin-out diagram for the Tascam standard 25-pin D-Sub connector\u003c\/li\u003e\n\u003cli\u003eBalanced input with choice of 25-pin D-Sub, Phoenix Euroblock, or front panel XLR connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering LX8 Line Level Signal Splitter & Isolator

Radial Engineering LX8 Line Level Signal Splitter & Isolator

$1,149.99

The LX8 Line Level Signal Splitter & Isolator from Radial Engineering is an 8-channel passive line-level isolator, designed specifically to manage balanced signals in professional audio systems. Applications include splitting a source between 2 destinations or simply isolating devices to eliminate the hum and buzz caused by ground loops. ...

Title

More Info
20%
Sale
Radial Engineering LX-3 Passive Line Splitter and Attenuator DI Direct Box
{"id":4691489554521,"title":"Radial Engineering LX-3 Passive Line Splitter and Attenuator DI Direct Box","handle":"radial-engineering-lx-3-passive-line-splitter-and-attenuator-di-direct-box","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eLX-3\u003c\/strong\u003e from \u003cstrong\u003eRadial\u003c\/strong\u003e is a passive line splitter and attenuator designed to lower hot signal levels and split one line-level input source to three line-level output paths, allowing flexible routing or parallel processing. Featuring low noise, high dynamic range, and flat frequency response, the LX-3 will not compromise signal quality.\u003c\/p\u003e\n\u003cp\u003eFor live sound, the LX-3 can split a mixer output to a PA, a primary multitrack recorder, and a backup multitrack recorder. In the studio, use it to split the output of a microphone preamp. Then, record one split with compression, one without compression, and one with tape saturation. Easily compare hardware compressors by routing the LX-3's outputs to multiple compressors. Manage extreme levels with the input pad, offering 12 dB of attenuation.\u003c\/p\u003e\n\u003cp\u003eIt is equally well-suited for live and in-the-studio productions, with its 14-gauge steel enclosure and no-slip pad. For installation in 500 Series racks, J-Rak 4 and J-Rak 8 rackmount adapters are available separately. The LX-3 requires no power supply, due to its passive circuitry.\u003c\/p\u003e\n\u003cp\u003eBalanced or unbalanced signals can be used. Input connectivity is available using a combo jack, compatible with XLR or 1\/4” input sources. XLR connectors are used for all outputs, the direct “Thru” jack and the two transformer-isolated outputs. Each output features a ground-lift switch, to minimize hum and buzz caused by ground loops.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eSplit one line-level XLR or 1\/4” input to three XLR outputs\u003c\/li\u003e\n\u003cli\u003eIdeal for complex signal routing and parallel processing\u003c\/li\u003e\n\u003cli\u003eTransformer-based, passive circuitry requires no power supply\u003c\/li\u003e\n\u003cli\u003eLow noise and low distortion\u003c\/li\u003e\n\u003cli\u003eHigh dynamic range and flat frequency response\u003c\/li\u003e\n\u003cli\u003eInput pad offers 12 dB of attenuation\u003c\/li\u003e\n\u003cli\u003eMinimize hum and buzz from ground loops via ground-lift switches for each output\u003c\/li\u003e\n\u003cli\u003eSturdy and durable 14-gauge steel enclosure with no-slip pad\u003c\/li\u003e\n\u003cli\u003eCompatible with 500 Series racks using J-Rak adapters (available separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T13:42:50-04:00","created_at":"2020-07-29T13:42:48-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":23999,"price_min":23999,"price_max":25999,"available":true,"price_varies":true,"compare_at_price":30000,"compare_at_price_min":30000,"compare_at_price_max":30000,"compare_at_price_varies":false,"variants":[{"id":32081146806361,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 1034-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14558625235033,"product_id":4691489554521,"position":1,"created_at":"2020-07-29T13:42:51-04:00","updated_at":"2020-07-29T13:42:51-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1034_lx_3_passive_line_splitter_1494240496_1334815.jpg?v=1596044571","variant_ids":[32081146806361]},"available":true,"name":"Radial Engineering LX-3 Passive Line Splitter and Attenuator DI Direct Box - NEW","public_title":"NEW","options":["NEW"],"price":25999,"weight":1361,"compare_at_price":30000,"inventory_management":"shopify","barcode":"676101044535","featured_media":{"alt":null,"id":6730149331033,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1034_lx_3_passive_line_splitter_1494240496_1334815.jpg?v=1596044571"}}},{"id":32081146839129,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 1034-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14558625267801,"product_id":4691489554521,"position":2,"created_at":"2020-07-29T13:42:52-04:00","updated_at":"2020-07-29T13:42:52-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794910.jpg?v=1596044572","variant_ids":[32081146839129]},"available":true,"name":"Radial Engineering LX-3 Passive Line Splitter and Attenuator DI Direct Box - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":23999,"weight":1361,"compare_at_price":30000,"inventory_management":"shopify","barcode":"676101044535","featured_media":{"alt":null,"id":6730149363801,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794910.jpg?v=1596044572"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1034_lx_3_passive_line_splitter_1494240496_1334815.jpg?v=1596044571","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794910.jpg?v=1596044572","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794911.jpg?v=1596044572","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794912.jpg?v=1596044572"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1034_lx_3_passive_line_splitter_1494240496_1334815.jpg?v=1596044571","options":["Title"],"media":[{"alt":null,"id":6730149331033,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1034_lx_3_passive_line_splitter_1494240496_1334815.jpg?v=1596044571"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1034_lx_3_passive_line_splitter_1494240496_1334815.jpg?v=1596044571","width":500},{"alt":null,"id":6730149363801,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794910.jpg?v=1596044572"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794910.jpg?v=1596044572","width":500},{"alt":null,"id":6730149396569,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794911.jpg?v=1596044572"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794911.jpg?v=1596044572","width":500},{"alt":null,"id":6730149462105,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794912.jpg?v=1596044571"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794912.jpg?v=1596044571","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eLX-3\u003c\/strong\u003e from \u003cstrong\u003eRadial\u003c\/strong\u003e is a passive line splitter and attenuator designed to lower hot signal levels and split one line-level input source to three line-level output paths, allowing flexible routing or parallel processing. Featuring low noise, high dynamic range, and flat frequency response, the LX-3 will not compromise signal quality.\u003c\/p\u003e\n\u003cp\u003eFor live sound, the LX-3 can split a mixer output to a PA, a primary multitrack recorder, and a backup multitrack recorder. In the studio, use it to split the output of a microphone preamp. Then, record one split with compression, one without compression, and one with tape saturation. Easily compare hardware compressors by routing the LX-3's outputs to multiple compressors. Manage extreme levels with the input pad, offering 12 dB of attenuation.\u003c\/p\u003e\n\u003cp\u003eIt is equally well-suited for live and in-the-studio productions, with its 14-gauge steel enclosure and no-slip pad. For installation in 500 Series racks, J-Rak 4 and J-Rak 8 rackmount adapters are available separately. The LX-3 requires no power supply, due to its passive circuitry.\u003c\/p\u003e\n\u003cp\u003eBalanced or unbalanced signals can be used. Input connectivity is available using a combo jack, compatible with XLR or 1\/4” input sources. XLR connectors are used for all outputs, the direct “Thru” jack and the two transformer-isolated outputs. Each output features a ground-lift switch, to minimize hum and buzz caused by ground loops.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eSplit one line-level XLR or 1\/4” input to three XLR outputs\u003c\/li\u003e\n\u003cli\u003eIdeal for complex signal routing and parallel processing\u003c\/li\u003e\n\u003cli\u003eTransformer-based, passive circuitry requires no power supply\u003c\/li\u003e\n\u003cli\u003eLow noise and low distortion\u003c\/li\u003e\n\u003cli\u003eHigh dynamic range and flat frequency response\u003c\/li\u003e\n\u003cli\u003eInput pad offers 12 dB of attenuation\u003c\/li\u003e\n\u003cli\u003eMinimize hum and buzz from ground loops via ground-lift switches for each output\u003c\/li\u003e\n\u003cli\u003eSturdy and durable 14-gauge steel enclosure with no-slip pad\u003c\/li\u003e\n\u003cli\u003eCompatible with 500 Series racks using J-Rak adapters (available separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering LX-3 Passive Line Splitter and Attenuator DI Direct Box

Radial Engineering LX-3 Passive Line Splitter and Attenuator DI Direct Box

$259.99

The LX-3 from Radial is a passive line splitter and attenuator designed to lower hot signal levels and split one line-level input source to three line-level output paths, allowing flexible routing or parallel processing. Featuring low noise, high dynamic range, and flat frequency response, the LX-3 will not compromise signal quality. For live...

Title

More Info
20%
Sale
Radial Engineering LX-2 Passive Line Splitter and Attenuator DI Direct Box
{"id":4691483328601,"title":"Radial Engineering LX-2 Passive Line Splitter and Attenuator DI Direct Box","handle":"radial-engineering-lx-2-passive-line-splitter-and-attenuator-di-direct-box","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eLX-2\u003c\/strong\u003e from \u003cstrong\u003eRadial Engineering\u003c\/strong\u003e is a passive line splitter and attenuator designed to lower hot signal levels and split one line-level input source to two line-level output paths, allowing flexible routing or parallel processing. Featuring low noise, high dynamic range, and flat frequency response, the LX-2 will not compromise signal quality.\u003c\/p\u003e\n\u003cp\u003eFor live sound, the LX-2 can split a mixer output to a PA and multitrack recorder. In the studio, use it to split the output of a microphone preamp. Then, record one signal with compression and one without. Manage extreme levels with the Trim pot, offering up to 10 dB of attenuation. A recessed on\/off button for the Trim control prevents accidental switching.\u003c\/p\u003e\n\u003cp\u003eIt is equally well-suited for live and in-the-studio productions, with its 14-gauge steel enclosure and no-slip pad. For installation in 500 Series racks, J-Rak 4 and J-Rak 8 rackmount adapters are available separately. The LX-2 requires no power supply, due to its passive circuitry.\u003c\/p\u003e\n\u003cp\u003eBalanced or unbalanced signals can be used. Input connectivity is available using a combo jack, compatible with XLR or 1\/4” input sources. XLR connectors are used for both outputs, the direct “Thru” jack and the transformer-isolated output. Each output features a ground-lift switch, to minimize hum and buzz caused by ground loops.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eSplit one line-level XLR or 1\/4” input to two XLR outputs\u003c\/li\u003e\n\u003cli\u003eIdeal for complex signal routing and parallel processing\u003c\/li\u003e\n\u003cli\u003eTransformer-based, passive circuitry requires no power supply\u003c\/li\u003e\n\u003cli\u003eLow noise and low distortion\u003c\/li\u003e\n\u003cli\u003eHigh dynamic range and flat frequency response\u003c\/li\u003e\n\u003cli\u003eTrim control with recessed on\/off switch offers up to 10 dB of attenuation\u003c\/li\u003e\n\u003cli\u003eMinimize hum and buzz from ground loops via ground-lift switches for each output\u003c\/li\u003e\n\u003cli\u003eSturdy and durable 14-gauge steel enclosure with no-slip pad\u003c\/li\u003e\n\u003cli\u003eCompatible with 500 Series racks using J-Rak adapters (available separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T13:13:46-04:00","created_at":"2020-07-29T13:13:44-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":19999,"price_min":19999,"price_max":21999,"available":true,"price_varies":true,"compare_at_price":25000,"compare_at_price_min":25000,"compare_at_price_max":25000,"compare_at_price_varies":false,"variants":[{"id":32081132519513,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 1033-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14558543249497,"product_id":4691483328601,"position":1,"created_at":"2020-07-29T13:13:47-04:00","updated_at":"2020-07-29T13:13:47-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1033_lx_2_passive_line_splitter_1494240496_1334814.jpg?v=1596042827","variant_ids":[32081132519513]},"available":true,"name":"Radial Engineering LX-2 Passive Line Splitter and Attenuator DI Direct Box - NEW","public_title":"NEW","options":["NEW"],"price":21999,"weight":1361,"compare_at_price":25000,"inventory_management":"shopify","barcode":"676101044528","featured_media":{"alt":null,"id":6730067083353,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1033_lx_2_passive_line_splitter_1494240496_1334814.jpg?v=1596042827"}}},{"id":32081132552281,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 1033-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14558543216729,"product_id":4691483328601,"position":2,"created_at":"2020-07-29T13:13:46-04:00","updated_at":"2020-07-29T13:13:47-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794904.jpg?v=1596042827","variant_ids":[32081132552281]},"available":true,"name":"Radial Engineering LX-2 Passive Line Splitter and Attenuator DI Direct Box - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":19999,"weight":1361,"compare_at_price":25000,"inventory_management":"shopify","barcode":"676101044528","featured_media":{"alt":null,"id":6730067116121,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794904.jpg?v=1596042826"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1033_lx_2_passive_line_splitter_1494240496_1334814.jpg?v=1596042827","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794904.jpg?v=1596042827","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794906.jpg?v=1596042827","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794905.jpg?v=1596042828"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1033_lx_2_passive_line_splitter_1494240496_1334814.jpg?v=1596042827","options":["Title"],"media":[{"alt":null,"id":6730067083353,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1033_lx_2_passive_line_splitter_1494240496_1334814.jpg?v=1596042827"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1033_lx_2_passive_line_splitter_1494240496_1334814.jpg?v=1596042827","width":500},{"alt":null,"id":6730067116121,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794904.jpg?v=1596042826"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794904.jpg?v=1596042826","width":500},{"alt":null,"id":6730067148889,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794906.jpg?v=1596042827"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794906.jpg?v=1596042827","width":500},{"alt":null,"id":6730067181657,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794905.jpg?v=1596042828"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1494240477_IMG_794905.jpg?v=1596042828","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eLX-2\u003c\/strong\u003e from \u003cstrong\u003eRadial Engineering\u003c\/strong\u003e is a passive line splitter and attenuator designed to lower hot signal levels and split one line-level input source to two line-level output paths, allowing flexible routing or parallel processing. Featuring low noise, high dynamic range, and flat frequency response, the LX-2 will not compromise signal quality.\u003c\/p\u003e\n\u003cp\u003eFor live sound, the LX-2 can split a mixer output to a PA and multitrack recorder. In the studio, use it to split the output of a microphone preamp. Then, record one signal with compression and one without. Manage extreme levels with the Trim pot, offering up to 10 dB of attenuation. A recessed on\/off button for the Trim control prevents accidental switching.\u003c\/p\u003e\n\u003cp\u003eIt is equally well-suited for live and in-the-studio productions, with its 14-gauge steel enclosure and no-slip pad. For installation in 500 Series racks, J-Rak 4 and J-Rak 8 rackmount adapters are available separately. The LX-2 requires no power supply, due to its passive circuitry.\u003c\/p\u003e\n\u003cp\u003eBalanced or unbalanced signals can be used. Input connectivity is available using a combo jack, compatible with XLR or 1\/4” input sources. XLR connectors are used for both outputs, the direct “Thru” jack and the transformer-isolated output. Each output features a ground-lift switch, to minimize hum and buzz caused by ground loops.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eSplit one line-level XLR or 1\/4” input to two XLR outputs\u003c\/li\u003e\n\u003cli\u003eIdeal for complex signal routing and parallel processing\u003c\/li\u003e\n\u003cli\u003eTransformer-based, passive circuitry requires no power supply\u003c\/li\u003e\n\u003cli\u003eLow noise and low distortion\u003c\/li\u003e\n\u003cli\u003eHigh dynamic range and flat frequency response\u003c\/li\u003e\n\u003cli\u003eTrim control with recessed on\/off switch offers up to 10 dB of attenuation\u003c\/li\u003e\n\u003cli\u003eMinimize hum and buzz from ground loops via ground-lift switches for each output\u003c\/li\u003e\n\u003cli\u003eSturdy and durable 14-gauge steel enclosure with no-slip pad\u003c\/li\u003e\n\u003cli\u003eCompatible with 500 Series racks using J-Rak adapters (available separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering LX-2 Passive Line Splitter and Attenuator DI Direct Box

Radial Engineering LX-2 Passive Line Splitter and Attenuator DI Direct Box

$219.99

The LX-2 from Radial Engineering is a passive line splitter and attenuator designed to lower hot signal levels and split one line-level input source to two line-level output paths, allowing flexible routing or parallel processing. Featuring low noise, high dynamic range, and flat frequency response, the LX-2 will not compromise signal quality...

Title

More Info
20%
Sale
Radial Engineering JS3 Three-Way Microphone Signal Splitter DI Direct Box
{"id":4691481854041,"title":"Radial Engineering JS3 Three-Way Microphone Signal Splitter DI Direct Box","handle":"radial-engineering-js3-three-way-microphone-signal-splitter","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eJS-3\u003c\/b\u003e from \u003cb\u003eRadial Engineering\u003c\/b\u003e is a ruggedly built, compact unit that splits a single microphone input signal into three outputs for driving three mic preamps or mixers from one source. The JS-3 also features a -30dB pad for accepting line-level signals, making it extremely versatile. The unit has 100% isolation with high-quality Jensen transformers, providing clean audio and minimizing the buzz caused by ground loops.\u003c\/p\u003e\n\u003cp\u003eThe JS-3 features a bookend design that protects the connectors and switches. Crafted from 14 gauge steel, the unit is virtually indestructible. You can also rack-mount up to eight units with an optional J-Rak from Radial Engineering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eCompact, Rugged Design\u003c\/li\u003e\n\u003cli\u003eSplits a single mic or line-level signal into three outputs\u003c\/li\u003e\n\u003cli\u003eHigh-quality Jensen transformers offer great-quality sound and provide 100% isolation to protect against hum from ground loops\u003c\/li\u003e\n\u003cli\u003eUses standard XLR connectors\u003c\/li\u003e\n\u003cli\u003e-30dB pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T13:05:42-04:00","created_at":"2020-07-29T13:05:42-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":23999,"price_min":23999,"price_max":25999,"available":true,"price_varies":true,"compare_at_price":30000,"compare_at_price_min":30000,"compare_at_price_max":30000,"compare_at_price_varies":false,"variants":[{"id":32081129570393,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 1023-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14558526439513,"product_id":4691481854041,"position":1,"created_at":"2020-07-29T13:08:19-04:00","updated_at":"2020-07-29T13:08:19-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_1023_JS_3_Three_Way_Microphone_1531146061_406294.jpg?v=1596042499","variant_ids":[32081129570393]},"available":true,"name":"Radial Engineering JS3 Three-Way Microphone Signal Splitter DI Direct Box - NEW","public_title":"NEW","options":["NEW"],"price":25999,"weight":1361,"compare_at_price":30000,"inventory_management":"shopify","barcode":"676101034925","featured_media":{"alt":null,"id":6730050273369,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_1023_JS_3_Three_Way_Microphone_1531146061_406294.jpg?v=1596042499"}}},{"id":32081129603161,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 1023-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14558526701657,"product_id":4691481854041,"position":2,"created_at":"2020-07-29T13:08:20-04:00","updated_at":"2020-07-29T13:08:20-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531145716_IMG_1022338.jpg?v=1596042500","variant_ids":[32081129603161]},"available":true,"name":"Radial Engineering JS3 Three-Way Microphone Signal Splitter DI Direct Box - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":23999,"weight":1361,"compare_at_price":30000,"inventory_management":"shopify","barcode":"676101034925","featured_media":{"alt":null,"id":6730050306137,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531145716_IMG_1022338.jpg?v=1596042500"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_1023_JS_3_Three_Way_Microphone_1531146061_406294.jpg?v=1596042499","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531145716_IMG_1022338.jpg?v=1596042500","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531145716_IMG_1022340.jpg?v=1596042500","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531145716_IMG_1022339.jpg?v=1596042500"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_1023_JS_3_Three_Way_Microphone_1531146061_406294.jpg?v=1596042499","options":["Title"],"media":[{"alt":null,"id":6730050273369,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_1023_JS_3_Three_Way_Microphone_1531146061_406294.jpg?v=1596042499"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_1023_JS_3_Three_Way_Microphone_1531146061_406294.jpg?v=1596042499","width":500},{"alt":null,"id":6730050306137,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531145716_IMG_1022338.jpg?v=1596042500"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531145716_IMG_1022338.jpg?v=1596042500","width":500},{"alt":null,"id":6730050338905,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531145716_IMG_1022340.jpg?v=1596042499"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531145716_IMG_1022340.jpg?v=1596042499","width":500},{"alt":null,"id":6730050371673,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531145716_IMG_1022339.jpg?v=1596042500"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531145716_IMG_1022339.jpg?v=1596042500","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eJS-3\u003c\/b\u003e from \u003cb\u003eRadial Engineering\u003c\/b\u003e is a ruggedly built, compact unit that splits a single microphone input signal into three outputs for driving three mic preamps or mixers from one source. The JS-3 also features a -30dB pad for accepting line-level signals, making it extremely versatile. The unit has 100% isolation with high-quality Jensen transformers, providing clean audio and minimizing the buzz caused by ground loops.\u003c\/p\u003e\n\u003cp\u003eThe JS-3 features a bookend design that protects the connectors and switches. Crafted from 14 gauge steel, the unit is virtually indestructible. You can also rack-mount up to eight units with an optional J-Rak from Radial Engineering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eCompact, Rugged Design\u003c\/li\u003e\n\u003cli\u003eSplits a single mic or line-level signal into three outputs\u003c\/li\u003e\n\u003cli\u003eHigh-quality Jensen transformers offer great-quality sound and provide 100% isolation to protect against hum from ground loops\u003c\/li\u003e\n\u003cli\u003eUses standard XLR connectors\u003c\/li\u003e\n\u003cli\u003e-30dB pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering JS3 Three-Way Microphone Signal Splitter DI Direct Box

Radial Engineering JS3 Three-Way Microphone Signal Splitter DI Direct Box

$259.99

The JS-3 from Radial Engineering is a ruggedly built, compact unit that splits a single microphone input signal into three outputs for driving three mic preamps or mixers from one source. The JS-3 also features a -30dB pad for accepting line-level signals, making it extremely versatile. The unit has 100% isolation with high-quality Jensen tra...

Title

More Info
13%
Sale
Radial Engineering Exo-Pod Broadcast Splitter with XLR & 3.5mm Connections
{"id":4691480871001,"title":"Radial Engineering Exo-Pod Broadcast Splitter with XLR \u0026 3.5mm Connections","handle":"radial-engineering-exo-pod-broadcast-splitter-with-xlr-3-5mm-connections","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eSporting transformer-isolated circuitry and requiring no power to run, the \u003cstrong\u003eExo-Pod \u003c\/strong\u003efrom \u003cstrong\u003eRadial Engineering \u003c\/strong\u003eis a floor box designed to take the balanced output from any mixing console and distribute the signal to ten XLR outputs and four 3.5mm connections, giving you as many as 14 separate audio destinations for one signal. As such, the Exo-Pod is useful in broadcast applications, such as connecting to handheld recorders, video cameras, or wireless receivers.\u003cbr\u003e \u003cbr\u003e Simply plug in a balanced XLR signal into the unit's XLR input jack to get started. From there, the signal will be protected by a variety of different features, such as the 14-gauge steel casing to provide shielding against magnetic fields, as well as the transformer-isolated outputs. Each XLR output has its own ground lift switch to help exterminate hum or buzz from ground loops. On the side of the unit, a trim pot allows any broadcast technician to easily reduce output level across all 14 connections. An XLR loop-through allows you to daisy-chain the signal to additional units, while bumpers on the side protect the aforementioned throughput and the input. Rubber feet keep your floor scuff-free, and a steel handle allows for quick maneuverability and transport.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eFeatures at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely passive design\u003c\/li\u003e\n\u003cli\u003eExo-Pod transformer will block phantom power to prevent damage to unit\u003c\/li\u003e\n\u003cli\u003e10 x XLR transformer-isolated outputs\u003c\/li\u003e\n\u003cli\u003eGround lifts to help eliminate buzz and hum caused by ground loops\u003c\/li\u003e\n\u003cli\u003e4 x 3.5mm transformer-isolated mini TRS outputs\u003c\/li\u003e\n\u003cli\u003eDurable switches with metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003cli\u003eDouble-sided, military-spec circuit board to ensure durability\u003c\/li\u003e\n\u003cli\u003eFull ground plane to reduce radio frequency interference\u003c\/li\u003e\n\u003cli\u003eTrim control for quick level adjustments across all outputs\u003c\/li\u003e\n\u003cli\u003eXLR loop-through to feed additional Exo-Pods\u003c\/li\u003e\n\u003cli\u003eDurable powder coat\u003c\/li\u003e\n\u003cli\u003eSteel handle for quick maneuverability\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber feet\u003c\/li\u003e\n\u003cli\u003eBumper to protect connectors and trim control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T13:00:32-04:00","created_at":"2020-07-29T13:00:32-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":25999,"price_min":25999,"price_max":27999,"available":true,"price_varies":true,"compare_at_price":30000,"compare_at_price_min":30000,"compare_at_price_max":30000,"compare_at_price_varies":false,"variants":[{"id":32081127538777,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 8012-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14558514905177,"product_id":4691480871001,"position":1,"created_at":"2020-07-29T13:03:51-04:00","updated_at":"2020-07-29T13:04:07-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8012_exo_pod_pres_box_expander_1459783270_1239913.jpg?v=1596042247","variant_ids":[32081127538777]},"available":true,"name":"Radial Engineering Exo-Pod Broadcast Splitter with XLR \u0026 3.5mm Connections - NEW","public_title":"NEW","options":["NEW"],"price":27999,"weight":1361,"compare_at_price":30000,"inventory_management":"shopify","barcode":"676101044207","featured_media":{"alt":null,"id":6730038804569,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8012_exo_pod_pres_box_expander_1459783270_1239913.jpg?v=1596042231"}}},{"id":32081127571545,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 8012-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14558515003481,"product_id":4691480871001,"position":2,"created_at":"2020-07-29T13:03:52-04:00","updated_at":"2020-07-29T13:04:07-04:00","alt":null,"width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291473871551_IMG_685729webp_WEBPImage_500x500pixels.png?v=1596042247","variant_ids":[32081127571545]},"available":true,"name":"Radial Engineering Exo-Pod Broadcast Splitter with XLR \u0026 3.5mm Connections - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":25999,"weight":1361,"compare_at_price":30000,"inventory_management":"shopify","barcode":"676101044207","featured_media":{"alt":null,"id":6730038706265,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291473871551_IMG_685729webp_WEBPImage_500x500pixels.png?v=1596042232"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8012_exo_pod_pres_box_expander_1459783270_1239913.jpg?v=1596042247","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291473871551_IMG_685729webp_WEBPImage_500x500pixels.png?v=1596042247","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1473871551_IMG_685730.jpg?v=1596042247","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291473871551_IMG_685751webp_WEBPImage_500x500pixels.png?v=1596042247"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8012_exo_pod_pres_box_expander_1459783270_1239913.jpg?v=1596042247","options":["Title"],"media":[{"alt":null,"id":6730038804569,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8012_exo_pod_pres_box_expander_1459783270_1239913.jpg?v=1596042231"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8012_exo_pod_pres_box_expander_1459783270_1239913.jpg?v=1596042231","width":500},{"alt":null,"id":6730038706265,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291473871551_IMG_685729webp_WEBPImage_500x500pixels.png?v=1596042232"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291473871551_IMG_685729webp_WEBPImage_500x500pixels.png?v=1596042232","width":1000},{"alt":null,"id":6730038771801,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1473871551_IMG_685730.jpg?v=1596042231"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1473871551_IMG_685730.jpg?v=1596042231","width":500},{"alt":null,"id":6730038739033,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291473871551_IMG_685751webp_WEBPImage_500x500pixels.png?v=1596042232"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291473871551_IMG_685751webp_WEBPImage_500x500pixels.png?v=1596042232","width":1000}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eSporting transformer-isolated circuitry and requiring no power to run, the \u003cstrong\u003eExo-Pod \u003c\/strong\u003efrom \u003cstrong\u003eRadial Engineering \u003c\/strong\u003eis a floor box designed to take the balanced output from any mixing console and distribute the signal to ten XLR outputs and four 3.5mm connections, giving you as many as 14 separate audio destinations for one signal. As such, the Exo-Pod is useful in broadcast applications, such as connecting to handheld recorders, video cameras, or wireless receivers.\u003cbr\u003e \u003cbr\u003e Simply plug in a balanced XLR signal into the unit's XLR input jack to get started. From there, the signal will be protected by a variety of different features, such as the 14-gauge steel casing to provide shielding against magnetic fields, as well as the transformer-isolated outputs. Each XLR output has its own ground lift switch to help exterminate hum or buzz from ground loops. On the side of the unit, a trim pot allows any broadcast technician to easily reduce output level across all 14 connections. An XLR loop-through allows you to daisy-chain the signal to additional units, while bumpers on the side protect the aforementioned throughput and the input. Rubber feet keep your floor scuff-free, and a steel handle allows for quick maneuverability and transport.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eFeatures at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eCompletely passive design\u003c\/li\u003e\n\u003cli\u003eExo-Pod transformer will block phantom power to prevent damage to unit\u003c\/li\u003e\n\u003cli\u003e10 x XLR transformer-isolated outputs\u003c\/li\u003e\n\u003cli\u003eGround lifts to help eliminate buzz and hum caused by ground loops\u003c\/li\u003e\n\u003cli\u003e4 x 3.5mm transformer-isolated mini TRS outputs\u003c\/li\u003e\n\u003cli\u003eDurable switches with metal outer casing, rated at over 20,000 cycles\u003c\/li\u003e\n\u003cli\u003eDouble-sided, military-spec circuit board to ensure durability\u003c\/li\u003e\n\u003cli\u003eFull ground plane to reduce radio frequency interference\u003c\/li\u003e\n\u003cli\u003eTrim control for quick level adjustments across all outputs\u003c\/li\u003e\n\u003cli\u003eXLR loop-through to feed additional Exo-Pods\u003c\/li\u003e\n\u003cli\u003eDurable powder coat\u003c\/li\u003e\n\u003cli\u003eSteel handle for quick maneuverability\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber feet\u003c\/li\u003e\n\u003cli\u003eBumper to protect connectors and trim control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering Exo-Pod Broadcast Splitter with XLR & 3.5mm Connections

Radial Engineering Exo-Pod Broadcast Splitter with XLR & 3.5mm Connections

$279.99

Sporting transformer-isolated circuitry and requiring no power to run, the Exo-Pod from Radial Engineering is a floor box designed to take the balanced output from any mixing console and distribute the signal to ten XLR outputs and four 3.5mm connections, giving you as many as 14 separate audio destinations for one signal. As such, the Exo-Po...

Title

More Info
20%
Sale
Radial Engineering Catapult Mini TRS 4-Channel Cat 5 Audio Snake
{"id":4691478544473,"title":"Radial Engineering Catapult Mini TRS 4-Channel Cat 5 Audio Snake","handle":"radial-engineering-catapult-mini-trs-4-channel-cat-5-audio-snake","description":"The \u003cb\u003eCatapult Mini TRS\u003c\/b\u003e from \u003cb\u003eRadial Engineering\u003c\/b\u003e is a 4-channel audio snake. It allows you to send four channels of audio over a Cat 5 or 6 Ethernet connection without signal loss, noise, or interference. The device is analog, obviating any need for digital conversion. Use this snake to minimize cable clutter on stages.\u003cbr\u003e \u003cbr\u003e The Catapult Mini TRS features four male 1\/4\" TRS inputs on cable tails and an RJ45 I\/O port, which can either send or receive analog audio over Cat 5 or 6 Ethernet cables. The housing is made of 16-gauge steel for handling any environment and is powder coated.\u003cbr\u003e \u003cbr\u003e Expando-mesh sheathing provides an extra measure of durability, protecting cables from damage. Finally, color-coded heatshrink labels help you to identify your individual TRS connections at a glance.","published_at":"2020-07-29T12:53:46-04:00","created_at":"2020-07-29T12:53:46-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":8000,"price_min":8000,"price_max":8999,"available":true,"price_varies":true,"compare_at_price":10000,"compare_at_price_min":10000,"compare_at_price_max":10000,"compare_at_price_varies":false,"variants":[{"id":32081121968217,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 8032-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14558484955225,"product_id":4691478544473,"position":1,"created_at":"2020-07-29T12:56:03-04:00","updated_at":"2020-07-29T12:56:16-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8032_4_channel_cat_5_mini_breakout_1558957837_1481776.jpg?v=1596041776","variant_ids":[32081121968217]},"available":true,"name":"Radial Engineering Catapult Mini TRS 4-Channel Cat 5 Audio Snake - NEW","public_title":"NEW","options":["NEW"],"price":8999,"weight":454,"compare_at_price":10000,"inventory_management":"shopify","barcode":"676101044849","featured_media":{"alt":null,"id":6730008264793,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8032_4_channel_cat_5_mini_breakout_1558957837_1481776.jpg?v=1596041763"}}},{"id":32081122000985,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 8032-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14558485250137,"product_id":4691478544473,"position":2,"created_at":"2020-07-29T12:56:05-04:00","updated_at":"2020-07-29T12:56:16-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357739.jpg?v=1596041776","variant_ids":[32081122000985]},"available":true,"name":"Radial Engineering Catapult Mini TRS 4-Channel Cat 5 Audio Snake - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":8000,"weight":454,"compare_at_price":10000,"inventory_management":"shopify","barcode":"676101044849","featured_media":{"alt":null,"id":6730008297561,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357739.jpg?v=1596041765"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8032_4_channel_cat_5_mini_breakout_1558957837_1481776.jpg?v=1596041776","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357739.jpg?v=1596041776","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357738.jpg?v=1596041776","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357739-1.jpg?v=1596041776","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357737.jpg?v=1596041776","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357741.jpg?v=1596041776"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8032_4_channel_cat_5_mini_breakout_1558957837_1481776.jpg?v=1596041776","options":["Title"],"media":[{"alt":null,"id":6730008264793,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8032_4_channel_cat_5_mini_breakout_1558957837_1481776.jpg?v=1596041763"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8032_4_channel_cat_5_mini_breakout_1558957837_1481776.jpg?v=1596041763","width":500},{"alt":null,"id":6730008297561,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357739.jpg?v=1596041765"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357739.jpg?v=1596041765","width":500},{"alt":null,"id":6730008363097,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357738.jpg?v=1596041764"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357738.jpg?v=1596041764","width":500},{"alt":null,"id":6730008330329,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357739-1.jpg?v=1596041763"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357739-1.jpg?v=1596041763","width":500},{"alt":null,"id":6730008395865,"position":5,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357737.jpg?v=1596041764"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357737.jpg?v=1596041764","width":500},{"alt":null,"id":6730008232025,"position":6,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357741.jpg?v=1596041765"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1589463031_IMG_1357741.jpg?v=1596041765","width":500}],"content":"The \u003cb\u003eCatapult Mini TRS\u003c\/b\u003e from \u003cb\u003eRadial Engineering\u003c\/b\u003e is a 4-channel audio snake. It allows you to send four channels of audio over a Cat 5 or 6 Ethernet connection without signal loss, noise, or interference. The device is analog, obviating any need for digital conversion. Use this snake to minimize cable clutter on stages.\u003cbr\u003e \u003cbr\u003e The Catapult Mini TRS features four male 1\/4\" TRS inputs on cable tails and an RJ45 I\/O port, which can either send or receive analog audio over Cat 5 or 6 Ethernet cables. The housing is made of 16-gauge steel for handling any environment and is powder coated.\u003cbr\u003e \u003cbr\u003e Expando-mesh sheathing provides an extra measure of durability, protecting cables from damage. Finally, color-coded heatshrink labels help you to identify your individual TRS connections at a glance."}
Radial Engineering Catapult Mini TRS 4-Channel Cat 5 Audio Snake

Radial Engineering Catapult Mini TRS 4-Channel Cat 5 Audio Snake

$89.99

The Catapult Mini TRS from Radial Engineering is a 4-channel audio snake. It allows you to send four channels of audio over a Cat 5 or 6 Ethernet connection without signal loss, noise, or interference. The device is analog, obviating any need for digital conversion. Use this snake to minimize cable clutter on stages. The Catapult Mini TRS featu...

Title

More Info
20%
Sale
Radial Engineering Catapult Mini RX 4-Channel Cat 5 Audio Snake
{"id":4691477200985,"title":"Radial Engineering Catapult Mini RX 4-Channel Cat 5 Audio Snake","handle":"radial-engineering-catapult-mini-rx-4-channel-cat-5-audio-snake","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eCatapult Mini RX\u003c\/b\u003e from \u003cb\u003eRadial Engineering\u003c\/b\u003e acts as a 4-channel audio snake. It features an RJ45 input, which receives four channels of analog audio over Cat 5\/6 Ethernet cables. Four male XLR outputs on cable tails allow you to plug directly into inputs of a mixer or recording interface. The housing is made of 16-gauge steel for handling any environment and is powder coated.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eExpando mesh sheathing provides extra durability and protects cables from damage\u003c\/li\u003e\n\u003cli\u003eColor-coded heatshrink labels for identifying channels at a glance\u003c\/li\u003e\n\u003cli\u003eCan be used with Catapult Mini TX with a Cat 5 cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T12:49:03-04:00","created_at":"2020-07-29T12:49:03-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":8000,"price_min":8000,"price_max":8999,"available":true,"price_varies":true,"compare_at_price":10000,"compare_at_price_min":10000,"compare_at_price_max":10000,"compare_at_price_varies":false,"variants":[{"id":32081119805529,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 8029-A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Radial Engineering Catapult Mini RX 4-Channel Cat 5 Audio Snake - NEW","public_title":"NEW","options":["NEW"],"price":8999,"weight":454,"compare_at_price":10000,"inventory_management":"shopify","barcode":"676101044764"},{"id":32081119838297,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 8029-B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Radial Engineering Catapult Mini RX 4-Channel Cat 5 Audio Snake - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":8000,"weight":454,"compare_at_price":10000,"inventory_management":"shopify","barcode":"676101044764"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8029_4_channel_shielded_cat_5_mini_1531303556_1417042.jpg?v=1596041552","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024419webp_WEBPImage_500x500pixels.png?v=1596041552","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024420.jpg?v=1596041552","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024421webp_WEBPImage_500x500pixels.png?v=1596041552","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024422.jpg?v=1596041552","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024423.jpg?v=1596041551"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8029_4_channel_shielded_cat_5_mini_1531303556_1417042.jpg?v=1596041552","options":["Title"],"media":[{"alt":null,"id":6729991618649,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8029_4_channel_shielded_cat_5_mini_1531303556_1417042.jpg?v=1596041538"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8029_4_channel_shielded_cat_5_mini_1531303556_1417042.jpg?v=1596041538","width":500},{"alt":null,"id":6729991454809,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024419webp_WEBPImage_500x500pixels.png?v=1596041539"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024419webp_WEBPImage_500x500pixels.png?v=1596041539","width":1000},{"alt":null,"id":6729991553113,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024420.jpg?v=1596041539"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024420.jpg?v=1596041539","width":500},{"alt":null,"id":6729991487577,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024421webp_WEBPImage_500x500pixels.png?v=1596041538"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024421webp_WEBPImage_500x500pixels.png?v=1596041538","width":1000},{"alt":null,"id":6729991520345,"position":5,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024422.jpg?v=1596041538"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024422.jpg?v=1596041538","width":500},{"alt":null,"id":6729991585881,"position":6,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024423.jpg?v=1596041540"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024423.jpg?v=1596041540","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eCatapult Mini RX\u003c\/b\u003e from \u003cb\u003eRadial Engineering\u003c\/b\u003e acts as a 4-channel audio snake. It features an RJ45 input, which receives four channels of analog audio over Cat 5\/6 Ethernet cables. Four male XLR outputs on cable tails allow you to plug directly into inputs of a mixer or recording interface. The housing is made of 16-gauge steel for handling any environment and is powder coated.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eExpando mesh sheathing provides extra durability and protects cables from damage\u003c\/li\u003e\n\u003cli\u003eColor-coded heatshrink labels for identifying channels at a glance\u003c\/li\u003e\n\u003cli\u003eCan be used with Catapult Mini TX with a Cat 5 cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering Catapult Mini RX 4-Channel Cat 5 Audio Snake

Radial Engineering Catapult Mini RX 4-Channel Cat 5 Audio Snake

$89.99

The Catapult Mini RX from Radial Engineering acts as a 4-channel audio snake. It features an RJ45 input, which receives four channels of analog audio over Cat 5/6 Ethernet cables. Four male XLR outputs on cable tails allow you to plug directly into inputs of a mixer or recording interface. The housing is made of 16-gauge steel for handling an...

Title

More Info
{"id":4691476217945,"title":"Radial Engineering Catapult Mini TX 4-Channel Cat 5 Audio Snake","handle":"radial-engineering-catapult-mini-tx-4-channel-cat-5-audio-snake","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eCatapult Mini TX\u003c\/b\u003e from \u003cb\u003eRadial Engineering\u003c\/b\u003e acts as a 4-channel audio snake. It allows you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. The Catapult Mini TX features four female XLR inputs on cable tails and an RJ45 output, which sends analog audio over cat 5\/6 Ethernet cables. The housing is made of 16-gauge steel for handling any environment and is powder coated.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eExpando mesh sheathing provides extra durability and protects cables from damage\u003c\/li\u003e\n\u003cli\u003eColor-coded heatshrink labels for identifying channels at a glance\u003c\/li\u003e\n\u003cli\u003eCan be used with Catapult Mini RX with a Cat 5 cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T12:47:32-04:00","created_at":"2020-07-29T12:47:31-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24"],"price":8000,"price_min":8000,"price_max":8999,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32081093787737,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 8028-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14558451302489,"product_id":4691476217945,"position":1,"created_at":"2020-07-29T12:47:33-04:00","updated_at":"2020-07-29T12:47:33-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8028_4_channel_shielded_cat_5_mini_1531303556_1417041.jpg?v=1596041253","variant_ids":[32081093787737]},"available":true,"name":"Radial Engineering Catapult Mini TX 4-Channel Cat 5 Audio Snake - NEW","public_title":"NEW","options":["NEW"],"price":8999,"weight":454,"compare_at_price":null,"inventory_management":"shopify","barcode":"676101044757","featured_media":{"alt":null,"id":6729974513753,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8028_4_channel_shielded_cat_5_mini_1531303556_1417041.jpg?v=1596041253"}}},{"id":32081093820505,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 8028-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14558451400793,"product_id":4691476217945,"position":2,"created_at":"2020-07-29T12:47:35-04:00","updated_at":"2020-07-29T12:47:35-04:00","alt":null,"width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024414webp_WEBPImage_500x500pixels.png?v=1596041255","variant_ids":[32081093820505]},"available":true,"name":"Radial Engineering Catapult Mini TX 4-Channel Cat 5 Audio Snake - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":8000,"weight":454,"compare_at_price":null,"inventory_management":"shopify","barcode":"676101044757","featured_media":{"alt":null,"id":6729974546521,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024414webp_WEBPImage_500x500pixels.png?v=1596041255"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8028_4_channel_shielded_cat_5_mini_1531303556_1417041.jpg?v=1596041253","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024414webp_WEBPImage_500x500pixels.png?v=1596041255","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024415.jpg?v=1596041255","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024416webp_WEBPImage_500x500pixels.png?v=1596041255","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024417.jpg?v=1596041255","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024418.jpg?v=1596041255"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8028_4_channel_shielded_cat_5_mini_1531303556_1417041.jpg?v=1596041253","options":["Title"],"media":[{"alt":null,"id":6729974513753,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8028_4_channel_shielded_cat_5_mini_1531303556_1417041.jpg?v=1596041253"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_8028_4_channel_shielded_cat_5_mini_1531303556_1417041.jpg?v=1596041253","width":500},{"alt":null,"id":6729974546521,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024414webp_WEBPImage_500x500pixels.png?v=1596041255"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024414webp_WEBPImage_500x500pixels.png?v=1596041255","width":1000},{"alt":null,"id":6729974579289,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024415.jpg?v=1596041255"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024415.jpg?v=1596041255","width":500},{"alt":null,"id":6729974612057,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024416webp_WEBPImage_500x500pixels.png?v=1596041254"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291531304126_IMG_1024416webp_WEBPImage_500x500pixels.png?v=1596041254","width":1000},{"alt":null,"id":6729974644825,"position":5,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024417.jpg?v=1596041255"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024417.jpg?v=1596041255","width":500},{"alt":null,"id":6729974677593,"position":6,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024418.jpg?v=1596041254"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531304126_IMG_1024418.jpg?v=1596041254","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eCatapult Mini TX\u003c\/b\u003e from \u003cb\u003eRadial Engineering\u003c\/b\u003e acts as a 4-channel audio snake. It allows you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. The Catapult Mini TX features four female XLR inputs on cable tails and an RJ45 output, which sends analog audio over cat 5\/6 Ethernet cables. The housing is made of 16-gauge steel for handling any environment and is powder coated.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eExpando mesh sheathing provides extra durability and protects cables from damage\u003c\/li\u003e\n\u003cli\u003eColor-coded heatshrink labels for identifying channels at a glance\u003c\/li\u003e\n\u003cli\u003eCan be used with Catapult Mini RX with a Cat 5 cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering Catapult Mini TX 4-Channel Cat 5 Audio Snake

Radial Engineering Catapult Mini TX 4-Channel Cat 5 Audio Snake

$89.99

The Catapult Mini TX from Radial Engineering acts as a 4-channel audio snake. It allows you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. The Catapult Mini TX features four female XLR inputs on cable tails and an RJ45 output, which s...

Title

More Info
20%
Sale
Radial Engineering EXTC-SA Guitar Effects Reamp Interface DI Direct Box
{"id":4691474055257,"title":"Radial Engineering EXTC-SA Guitar Effects Reamp Interface DI Direct Box","handle":"radial-engineering-extc-sa-guitar-effects-reamp-interface-di-direct-box","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eEXTC-SA Guitar Effects Reamp Interface \u003c\/strong\u003efrom \u003cstrong\u003eRadial Engineering \u003c\/strong\u003eis a standalone audio interface that lets you incorporate guitar effects into pro-audio recording. This unit is easy to use; just connect a line-level signal from the recording system. The unit unbalances the signal and converts it to high impedance where guitar pedals can be inserted at will. Simply plug in, turn the track on, set your levels, and adjust the blend for adding various effects to your track.\u003c\/p\u003e\n\u003cp\u003eIt includes Radial's 100% discrete class-A guitar buffering for ultimate audio integrity, transformer isolation to eliminate buzz and hum caused by ground loops, 180º polarity reverse to keep effects and balanced signals in phase, and 2 loops that will let you compare signal paths or combine them to create your own sounds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eTwo effects loops with easy to compare bypass switches\u003c\/li\u003e\n\u003cli\u003eLets you put those old pedals to use\u003c\/li\u003e\n\u003cli\u003eSend and receive controls adjust the level going to the pedals and sensitivity of the receive input to optimize signal-to-noise ratio\u003c\/li\u003e\n\u003cli\u003e180º phase invert lets you compensate for effect devices that invert the polarity of the wet signal so it may be blended with the dry signal\u003c\/li\u003e\n\u003cli\u003eBlend control lets you adjust the wet-dry mix between the original unprocessed signal and the EXTC's effects loop\u003c\/li\u003e\n\u003cli\u003eEFX Loops A and B buttons are used to turn Loop-A and Loop-B on and off; two LED indicators illuminate when a loop is active\u003c\/li\u003e\n\u003cli\u003eXLR Input jack receives the 4 dB signal from your recording system and converts it for hi-Z guitar effects\u003c\/li\u003e\n\u003cli\u003eXLR Output jack sends a 4 dB signal back to your recording system for noise-free cable runs\u003c\/li\u003e\n\u003cli\u003eParallel 1\/4\" TRS jacks enable the EXTC to be used with balanced and unbalanced sources\u003c\/li\u003e\n\u003cli\u003e1\/4\" send and receive jacks are used to connect guitar pedals to the EXTC\u003c\/li\u003e\n\u003cli\u003eTransformer provides isolated send path to the effects to help eliminate hum and buzz caused by ground loops\u003c\/li\u003e\n\u003cli\u003eDiscrete class-A buffers for optimal signal flow and natural tone\u003c\/li\u003e\n\u003cli\u003eI-Beam reinforced enclosure makes it difficult to torque the PC board \u0026amp; eliminates cold solder joints\u003c\/li\u003e\n\u003cli\u003eMilitary-spec PCB with full ground plane for noise-free performance and double-sided for durability\u003c\/li\u003e\n\u003cli\u003eGlass-filled nylon connectors are tough and bolted to the chassis for durability\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 14-gauge steel construction with durable baked-enamel finish\u003c\/li\u003e\n\u003cli\u003eFull bottom no-slip pad provides electrical and mechanical isolation and keeps the unit from sliding around\u003c\/li\u003e\n\u003cli\u003eBookend design enclosure creates a protective zone around the front controls\u003c\/li\u003e\n\u003cli\u003eConnection for the included power supply with handy cable clamp to prevent accidental disconnection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T12:39:50-04:00","created_at":"2020-07-29T12:39:50-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Brand-Radial","Direct Box","finance24"],"price":23999,"price_min":23999,"price_max":25999,"available":true,"price_varies":true,"compare_at_price":30000,"compare_at_price_min":30000,"compare_at_price_max":30000,"compare_at_price_varies":false,"variants":[{"id":32081081434201,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 1420-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14558420959321,"product_id":4691474055257,"position":1,"created_at":"2020-07-29T12:40:36-04:00","updated_at":"2020-07-29T12:41:03-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1420_extc_sa_guitar_effects_interface_1363181849_927535.jpg?v=1596040863","variant_ids":[32081081434201]},"available":true,"name":"Radial Engineering EXTC-SA Guitar Effects Reamp Interface DI Direct Box - NEW","public_title":"NEW","options":["NEW"],"price":25999,"weight":1361,"compare_at_price":30000,"inventory_management":"shopify","barcode":"676101040407","featured_media":{"alt":null,"id":6729944203353,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1420_extc_sa_guitar_effects_interface_1363181849_927535.jpg?v=1596040836"}}},{"id":32081081466969,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 1420-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14558421024857,"product_id":4691474055257,"position":2,"created_at":"2020-07-29T12:40:37-04:00","updated_at":"2020-07-29T12:41:03-04:00","alt":null,"width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291363181643_IMG_308038webp_WEBPImage_500x500pixels.png?v=1596040863","variant_ids":[32081081466969]},"available":true,"name":"Radial Engineering EXTC-SA Guitar Effects Reamp Interface DI Direct Box - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":23999,"weight":1361,"compare_at_price":30000,"inventory_management":"shopify","barcode":"676101040407","featured_media":{"alt":null,"id":6729944137817,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291363181643_IMG_308038webp_WEBPImage_500x500pixels.png?v=1596040837"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1420_extc_sa_guitar_effects_interface_1363181849_927535.jpg?v=1596040863","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291363181643_IMG_308038webp_WEBPImage_500x500pixels.png?v=1596040863","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291363181643_IMG_308039webp_WEBPImage_500x500pixels.png?v=1596040863","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308037.jpg?v=1596040837"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1420_extc_sa_guitar_effects_interface_1363181849_927535.jpg?v=1596040863","options":["Title"],"media":[{"alt":null,"id":6729944203353,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1420_extc_sa_guitar_effects_interface_1363181849_927535.jpg?v=1596040836"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1420_extc_sa_guitar_effects_interface_1363181849_927535.jpg?v=1596040836","width":500},{"alt":null,"id":6729944137817,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291363181643_IMG_308038webp_WEBPImage_500x500pixels.png?v=1596040837"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291363181643_IMG_308038webp_WEBPImage_500x500pixels.png?v=1596040837","width":1000},{"alt":null,"id":6729944170585,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291363181643_IMG_308039webp_WEBPImage_500x500pixels.png?v=1596040836"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291363181643_IMG_308039webp_WEBPImage_500x500pixels.png?v=1596040836","width":1000},{"alt":null,"id":6729944236121,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308037.jpg?v=1596040835"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308037.jpg?v=1596040835","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eEXTC-SA Guitar Effects Reamp Interface \u003c\/strong\u003efrom \u003cstrong\u003eRadial Engineering \u003c\/strong\u003eis a standalone audio interface that lets you incorporate guitar effects into pro-audio recording. This unit is easy to use; just connect a line-level signal from the recording system. The unit unbalances the signal and converts it to high impedance where guitar pedals can be inserted at will. Simply plug in, turn the track on, set your levels, and adjust the blend for adding various effects to your track.\u003c\/p\u003e\n\u003cp\u003eIt includes Radial's 100% discrete class-A guitar buffering for ultimate audio integrity, transformer isolation to eliminate buzz and hum caused by ground loops, 180º polarity reverse to keep effects and balanced signals in phase, and 2 loops that will let you compare signal paths or combine them to create your own sounds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eTwo effects loops with easy to compare bypass switches\u003c\/li\u003e\n\u003cli\u003eLets you put those old pedals to use\u003c\/li\u003e\n\u003cli\u003eSend and receive controls adjust the level going to the pedals and sensitivity of the receive input to optimize signal-to-noise ratio\u003c\/li\u003e\n\u003cli\u003e180º phase invert lets you compensate for effect devices that invert the polarity of the wet signal so it may be blended with the dry signal\u003c\/li\u003e\n\u003cli\u003eBlend control lets you adjust the wet-dry mix between the original unprocessed signal and the EXTC's effects loop\u003c\/li\u003e\n\u003cli\u003eEFX Loops A and B buttons are used to turn Loop-A and Loop-B on and off; two LED indicators illuminate when a loop is active\u003c\/li\u003e\n\u003cli\u003eXLR Input jack receives the 4 dB signal from your recording system and converts it for hi-Z guitar effects\u003c\/li\u003e\n\u003cli\u003eXLR Output jack sends a 4 dB signal back to your recording system for noise-free cable runs\u003c\/li\u003e\n\u003cli\u003eParallel 1\/4\" TRS jacks enable the EXTC to be used with balanced and unbalanced sources\u003c\/li\u003e\n\u003cli\u003e1\/4\" send and receive jacks are used to connect guitar pedals to the EXTC\u003c\/li\u003e\n\u003cli\u003eTransformer provides isolated send path to the effects to help eliminate hum and buzz caused by ground loops\u003c\/li\u003e\n\u003cli\u003eDiscrete class-A buffers for optimal signal flow and natural tone\u003c\/li\u003e\n\u003cli\u003eI-Beam reinforced enclosure makes it difficult to torque the PC board \u0026amp; eliminates cold solder joints\u003c\/li\u003e\n\u003cli\u003eMilitary-spec PCB with full ground plane for noise-free performance and double-sided for durability\u003c\/li\u003e\n\u003cli\u003eGlass-filled nylon connectors are tough and bolted to the chassis for durability\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 14-gauge steel construction with durable baked-enamel finish\u003c\/li\u003e\n\u003cli\u003eFull bottom no-slip pad provides electrical and mechanical isolation and keeps the unit from sliding around\u003c\/li\u003e\n\u003cli\u003eBookend design enclosure creates a protective zone around the front controls\u003c\/li\u003e\n\u003cli\u003eConnection for the included power supply with handy cable clamp to prevent accidental disconnection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering EXTC-SA Guitar Effects Reamp Interface DI Direct Box

Radial Engineering EXTC-SA Guitar Effects Reamp Interface DI Direct Box

$259.99

The EXTC-SA Guitar Effects Reamp Interface from Radial Engineering is a standalone audio interface that lets you incorporate guitar effects into pro-audio recording. This unit is easy to use; just connect a line-level signal from the recording system. The unit unbalances the signal and converts it to high impedance where guitar pedals can be ...

Title

More Info
18%
Sale
Radial Engineering X-Amp Active Re-Amplifying Device DI Direct Box
{"id":4691472777305,"title":"Radial Engineering X-Amp Active Re-Amplifying Device DI Direct Box","handle":"radial-engineering-x-amp-active-re-amplifying-device-di-direct-box","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eX-Amp\u003c\/b\u003e from \u003cb\u003eRadial Engineering\u003c\/b\u003e is an active re-amping device that allows an engineer or producer to take a pre-recorded guitar track that would be typically at line level, and output a guitar level signal that can then be sent back to an amplifier\/speaker or an effects box. This opens the door to explore new musical sounds and spur on the creative process since the unit will drive a guitar amplifier as if the player was still plugged into it.\u003c\/p\u003e\n\u003cp\u003eUsing the X-Amp is easy. One would, for instance, record a dry track using a high quality direct box, then send this track from the recorder to the X-Amp and then to either guitar amps, effect pedals or combinations thereof. This has many benefits. Once the basic track has been recorded, replacing or adding tracks can be done well after the session player has gone home. This eliminates tiresome repetition and assures a fresh vibrant performance on the final recording. Furthermore, by driving two amps at the same time, new sounds and textures can be created allowing the engineer or producer to make artistic decisions as the recording progresses.\u003c\/p\u003e\n\u003cp\u003eThe X-Amp employs a Class-A circuit design that has been optimized for use with guitars. Features include balanced line level input with LED peak indicator and level control, direct and isolated guitar amplifier outputs, 180° polarity reverse to bring both amps into phase and dual ground lift options for noise-free operation. A welded I-beam internal skeleton provides a separate housing for maximum protection against external forces, which may cause stress on the PC board assembly while the outside bookend cover provides a protective zone for the switches, potentiometer and connectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eActive re-amping device with 100% Class-A signal path\u003c\/li\u003e\n\u003cli\u003eTwo outputs can drive two separate amplifiers\u003c\/li\u003e\n\u003cli\u003eInput level overload LED indicator\u003c\/li\u003e\n\u003cli\u003eVariable output level control\u003c\/li\u003e\n\u003cli\u003eIsolated output eliminates ground loops\u003c\/li\u003e\n\u003cli\u003eFull-bottom no-slip pad provides electrical insulation and mechanical isolation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T12:36:52-04:00","created_at":"2020-07-29T12:36:50-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Brand-Radial","Direct Box","finance24"],"price":17999,"price_min":17999,"price_max":19999,"available":true,"price_varies":true,"compare_at_price":22000,"compare_at_price_min":22000,"compare_at_price_max":22000,"compare_at_price_varies":false,"variants":[{"id":32081075175513,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 1028-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14558407557209,"product_id":4691472777305,"position":1,"created_at":"2020-07-29T12:36:53-04:00","updated_at":"2020-07-29T12:36:53-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_1028_X_Amp_Re_Amper_1459953829_438666.jpg?v=1596040613","variant_ids":[32081075175513]},"available":true,"name":"Radial Engineering X-Amp Active Re-Amplifying Device DI Direct Box - NEW","public_title":"NEW","options":["NEW"],"price":19999,"weight":1361,"compare_at_price":22000,"inventory_management":"shopify","barcode":"676101034901","featured_media":{"alt":null,"id":6729930670169,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_1028_X_Amp_Re_Amper_1459953829_438666.jpg?v=1596040613"}}},{"id":32081075208281,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 1028-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14558408048729,"product_id":4691472777305,"position":2,"created_at":"2020-07-29T12:36:54-04:00","updated_at":"2020-07-29T12:36:54-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1459953856_IMG_612779.jpg?v=1596040614","variant_ids":[32081075208281]},"available":true,"name":"Radial Engineering X-Amp Active Re-Amplifying Device DI Direct Box - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":17999,"weight":1361,"compare_at_price":22000,"inventory_management":"shopify","barcode":"676101034901","featured_media":{"alt":null,"id":6729930702937,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1459953856_IMG_612779.jpg?v=1596040614"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_1028_X_Amp_Re_Amper_1459953829_438666.jpg?v=1596040613","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1459953856_IMG_612779.jpg?v=1596040614","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291459953856_IMG_612780webp_WEBPImage_500x500pixels.png?v=1596040614"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_1028_X_Amp_Re_Amper_1459953829_438666.jpg?v=1596040613","options":["Title"],"media":[{"alt":null,"id":6729930670169,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_1028_X_Amp_Re_Amper_1459953829_438666.jpg?v=1596040613"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_R800_1028_X_Amp_Re_Amper_1459953829_438666.jpg?v=1596040613","width":500},{"alt":null,"id":6729930702937,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1459953856_IMG_612779.jpg?v=1596040614"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1459953856_IMG_612779.jpg?v=1596040614","width":500},{"alt":null,"id":6729930735705,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291459953856_IMG_612780webp_WEBPImage_500x500pixels.png?v=1596040613"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-291459953856_IMG_612780webp_WEBPImage_500x500pixels.png?v=1596040613","width":1000}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eX-Amp\u003c\/b\u003e from \u003cb\u003eRadial Engineering\u003c\/b\u003e is an active re-amping device that allows an engineer or producer to take a pre-recorded guitar track that would be typically at line level, and output a guitar level signal that can then be sent back to an amplifier\/speaker or an effects box. This opens the door to explore new musical sounds and spur on the creative process since the unit will drive a guitar amplifier as if the player was still plugged into it.\u003c\/p\u003e\n\u003cp\u003eUsing the X-Amp is easy. One would, for instance, record a dry track using a high quality direct box, then send this track from the recorder to the X-Amp and then to either guitar amps, effect pedals or combinations thereof. This has many benefits. Once the basic track has been recorded, replacing or adding tracks can be done well after the session player has gone home. This eliminates tiresome repetition and assures a fresh vibrant performance on the final recording. Furthermore, by driving two amps at the same time, new sounds and textures can be created allowing the engineer or producer to make artistic decisions as the recording progresses.\u003c\/p\u003e\n\u003cp\u003eThe X-Amp employs a Class-A circuit design that has been optimized for use with guitars. Features include balanced line level input with LED peak indicator and level control, direct and isolated guitar amplifier outputs, 180° polarity reverse to bring both amps into phase and dual ground lift options for noise-free operation. A welded I-beam internal skeleton provides a separate housing for maximum protection against external forces, which may cause stress on the PC board assembly while the outside bookend cover provides a protective zone for the switches, potentiometer and connectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eActive re-amping device with 100% Class-A signal path\u003c\/li\u003e\n\u003cli\u003eTwo outputs can drive two separate amplifiers\u003c\/li\u003e\n\u003cli\u003eInput level overload LED indicator\u003c\/li\u003e\n\u003cli\u003eVariable output level control\u003c\/li\u003e\n\u003cli\u003eIsolated output eliminates ground loops\u003c\/li\u003e\n\u003cli\u003eFull-bottom no-slip pad provides electrical insulation and mechanical isolation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering X-Amp Active Re-Amplifying Device DI Direct Box

Radial Engineering X-Amp Active Re-Amplifying Device DI Direct Box

$199.99

The X-Amp from Radial Engineering is an active re-amping device that allows an engineer or producer to take a pre-recorded guitar track that would be typically at line level, and output a guitar level signal that can then be sent back to an amplifier/speaker or an effects box. This opens the door to explore new musical sounds and spur on the ...

Title

More Info
20%
Sale
Radial Engineering JR1L Remote Latching Footswitch
{"id":4691284754521,"title":"Radial Engineering JR1L Remote Latching Footswitch","handle":"radial-engineering-jr1l-remote-latching-footswitch","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eJR1L\u003c\/b\u003e from \u003cb\u003eRadial\u003c\/b\u003e is a latching footswitch that can control various Radial devices, such as the Relay Xo stereo switcher, and is designed to remotely control functions such as selecting A or B outputs. When used for this purpose and set to active mode, the footswitch derives power from the device under control, thus eliminating the need for a local power supply or batteries.\u003c\/p\u003e\n\u003cp\u003eThe footswitch can also function in passive mode, allowing it to function as a standard footswitch for any device with a compatible 1\/4\" footswitch jack. The latching footswitch changes states each time it is pressed and is a good option when switching effects that stay on for the duration of a song.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T03:02:41-04:00","created_at":"2020-07-29T03:02:41-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24","Guitar Pedal"],"price":8000,"price_min":8000,"price_max":8999,"available":true,"price_varies":true,"compare_at_price":10000,"compare_at_price_min":10000,"compare_at_price_max":10000,"compare_at_price_varies":false,"variants":[{"id":32080371187801,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 2082-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14556145713241,"product_id":4691284754521,"position":1,"created_at":"2020-07-29T03:03:36-04:00","updated_at":"2020-07-29T03:03:36-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1412158590_IMG_428944_4e3f7839-2793-4e40-b1fe-29a869214156.jpg?v=1596006216","variant_ids":[32080371187801]},"available":true,"name":"Radial Engineering JR1L Remote Latching Footswitch - NEW","public_title":"NEW","options":["NEW"],"price":8999,"weight":1361,"compare_at_price":10000,"inventory_management":"shopify","barcode":"676101041367","featured_media":{"alt":null,"id":6727667646553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1412158590_IMG_428944_4e3f7839-2793-4e40-b1fe-29a869214156.jpg?v=1596006216"}}},{"id":32080371220569,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 2082-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14556145746009,"product_id":4691284754521,"position":2,"created_at":"2020-07-29T03:03:36-04:00","updated_at":"2020-07-29T03:03:36-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2082_jr1l_remote_latching_1412158847_1081061_5e3cf934-2590-4d69-918a-1d6ab89755e2.jpg?v=1596006216","variant_ids":[32080371220569]},"available":true,"name":"Radial Engineering JR1L Remote Latching Footswitch - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":8000,"weight":1361,"compare_at_price":10000,"inventory_management":"shopify","barcode":"676101041367","featured_media":{"alt":null,"id":6727667679321,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2082_jr1l_remote_latching_1412158847_1081061_5e3cf934-2590-4d69-918a-1d6ab89755e2.jpg?v=1596006216"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1412158590_IMG_428944_4e3f7839-2793-4e40-b1fe-29a869214156.jpg?v=1596006216","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2082_jr1l_remote_latching_1412158847_1081061_5e3cf934-2590-4d69-918a-1d6ab89755e2.jpg?v=1596006216"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1412158590_IMG_428944_4e3f7839-2793-4e40-b1fe-29a869214156.jpg?v=1596006216","options":["Title"],"media":[{"alt":null,"id":6727667646553,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1412158590_IMG_428944_4e3f7839-2793-4e40-b1fe-29a869214156.jpg?v=1596006216"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1412158590_IMG_428944_4e3f7839-2793-4e40-b1fe-29a869214156.jpg?v=1596006216","width":500},{"alt":null,"id":6727667679321,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2082_jr1l_remote_latching_1412158847_1081061_5e3cf934-2590-4d69-918a-1d6ab89755e2.jpg?v=1596006216"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2082_jr1l_remote_latching_1412158847_1081061_5e3cf934-2590-4d69-918a-1d6ab89755e2.jpg?v=1596006216","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eJR1L\u003c\/b\u003e from \u003cb\u003eRadial\u003c\/b\u003e is a latching footswitch that can control various Radial devices, such as the Relay Xo stereo switcher, and is designed to remotely control functions such as selecting A or B outputs. When used for this purpose and set to active mode, the footswitch derives power from the device under control, thus eliminating the need for a local power supply or batteries.\u003c\/p\u003e\n\u003cp\u003eThe footswitch can also function in passive mode, allowing it to function as a standard footswitch for any device with a compatible 1\/4\" footswitch jack. The latching footswitch changes states each time it is pressed and is a good option when switching effects that stay on for the duration of a song.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering JR1L Remote Latching Footswitch

Radial Engineering JR1L Remote Latching Footswitch

$89.99

The JR1L from Radial is a latching footswitch that can control various Radial devices, such as the Relay Xo stereo switcher, and is designed to remotely control functions such as selecting A or B outputs. When used for this purpose and set to active mode, the footswitch derives power from the device under control, thus eliminating the need fo...

Title

More Info
20%
Sale
Radial Engineering JR1M Remote Momentary Footswitch JR1-M
{"id":4691283279961,"title":"Radial Engineering JR1M Remote Momentary Footswitch JR1-M","handle":"radial-engineering-jr1m-remote-momentary-footswitch-jr1-m","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eJR1M\u003c\/b\u003e from \u003cb\u003eRadial\u003c\/b\u003e is a momentary footswitch that can control various Radial devices, such as the Relay Xo stereo switcher, and is designed to remotely control functions such as switching between A and B outputs. When used for this purpose and set to active mode, the footswitch derives power from the device under control, thus eliminating the need for a local power supply or batteries.\u003c\/p\u003e\n\u003cp\u003eThe footswitch can also function in passive mode, allowing it to function as a standard footswitch for any device with a compatible 1\/4\" footswitch jack. The momentary footswitch changes states only when held down and subsequently released and is a well suited for 'push-to-talk' uses like toggling to an intercom system to speak with stage technicians.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T02:58:14-04:00","created_at":"2020-07-29T02:58:14-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24","Guitar Pedal"],"price":8000,"price_min":8000,"price_max":8999,"available":true,"price_varies":true,"compare_at_price":10000,"compare_at_price_min":10000,"compare_at_price_max":10000,"compare_at_price_varies":false,"variants":[{"id":32080368435289,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 2080-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14556134834265,"product_id":4691283279961,"position":1,"created_at":"2020-07-29T03:00:00-04:00","updated_at":"2020-07-29T03:00:41-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2080_jr1m_remote_momentary_1412158847_1081060.jpg?v=1596006041","variant_ids":[32080368435289]},"available":true,"name":"Radial Engineering JR1M Remote Momentary Footswitch JR1-M - NEW","public_title":"NEW","options":["NEW"],"price":8999,"weight":1361,"compare_at_price":10000,"inventory_management":"shopify","barcode":"676101041350","featured_media":{"alt":null,"id":6727656767577,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2080_jr1m_remote_momentary_1412158847_1081060.jpg?v=1596006000"}}},{"id":32080368468057,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 2080-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14556134867033,"product_id":4691283279961,"position":2,"created_at":"2020-07-29T03:00:00-04:00","updated_at":"2020-07-29T03:00:41-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1412158590_IMG_428945.jpg?v=1596006041","variant_ids":[32080368468057]},"available":true,"name":"Radial Engineering JR1M Remote Momentary Footswitch JR1-M - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":8000,"weight":1361,"compare_at_price":10000,"inventory_management":"shopify","barcode":"676101041350","featured_media":{"alt":null,"id":6727656734809,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1412158590_IMG_428945.jpg?v=1596006000"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2080_jr1m_remote_momentary_1412158847_1081060.jpg?v=1596006041","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1412158590_IMG_428945.jpg?v=1596006041"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2080_jr1m_remote_momentary_1412158847_1081060.jpg?v=1596006041","options":["Title"],"media":[{"alt":null,"id":6727656767577,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2080_jr1m_remote_momentary_1412158847_1081060.jpg?v=1596006000"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2080_jr1m_remote_momentary_1412158847_1081060.jpg?v=1596006000","width":500},{"alt":null,"id":6727656734809,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1412158590_IMG_428945.jpg?v=1596006000"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1412158590_IMG_428945.jpg?v=1596006000","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eJR1M\u003c\/b\u003e from \u003cb\u003eRadial\u003c\/b\u003e is a momentary footswitch that can control various Radial devices, such as the Relay Xo stereo switcher, and is designed to remotely control functions such as switching between A and B outputs. When used for this purpose and set to active mode, the footswitch derives power from the device under control, thus eliminating the need for a local power supply or batteries.\u003c\/p\u003e\n\u003cp\u003eThe footswitch can also function in passive mode, allowing it to function as a standard footswitch for any device with a compatible 1\/4\" footswitch jack. The momentary footswitch changes states only when held down and subsequently released and is a well suited for 'push-to-talk' uses like toggling to an intercom system to speak with stage technicians.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering JR1M Remote Momentary Footswitch JR1-M

Radial Engineering JR1M Remote Momentary Footswitch JR1-M

$89.99

The JR1M from Radial is a momentary footswitch that can control various Radial devices, such as the Relay Xo stereo switcher, and is designed to remotely control functions such as switching between A and B outputs. When used for this purpose and set to active mode, the footswitch derives power from the device under control, thus eliminating t...

Title

More Info
18%
Sale
Radial Engineering JR-2 Remote Control Footswitch
{"id":4691280363609,"title":"Radial Engineering JR-2 Remote Control Footswitch","handle":"radial-engineering-jr-2-remote-control-footswitch","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eJR-2 Remote Control Footswitch \u003c\/strong\u003efrom\u003cstrong\u003e Radial Engineering \u003c\/strong\u003eis designed for use with the Firefly Tube Direct Box. This compact switcher features 2 footswitches and 3 LEDs. Power is supplied by the Firefly, thus eliminating the need for batteries or a secondary power supply. Connection between the 2 devices is done with a balanced cable with a 1\/4” TRS connector at one end and choice between a 1\/4” TRS or XLR at the other. The XLR has the added benefit of being able to be locked.\u003c\/p\u003e\n\u003cp\u003eWith the JR-2 connected, you can remotely select between inputs A and B to select the desired instrument. The second switch is used to mute the Firefly Tube Direct Box for quiet on-stage tuning via the always-on Tuner output. Depressing the footswitch illuminates the LED indicators to let you know which function is active.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T02:51:18-04:00","created_at":"2020-07-29T02:51:18-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24","Guitar Pedal"],"price":9000,"price_min":9000,"price_max":9999,"available":true,"price_varies":true,"compare_at_price":11000,"compare_at_price_min":11000,"compare_at_price_max":11000,"compare_at_price_varies":false,"variants":[{"id":32080359587929,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 2090","requires_shipping":true,"taxable":true,"featured_image":{"id":14556122054745,"product_id":4691280363609,"position":1,"created_at":"2020-07-29T02:53:28-04:00","updated_at":"2020-07-29T02:53:28-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2090_jr2_remote_control_footswitch_1534950560_927553_3e0b5ccb-5e66-4d3e-96d5-fcca373b52f2.jpg?v=1596005608","variant_ids":[32080359587929]},"available":true,"name":"Radial Engineering JR-2 Remote Control Footswitch - NEW","public_title":"NEW","options":["NEW"],"price":9999,"weight":1361,"compare_at_price":11000,"inventory_management":"shopify","barcode":"676101040421","featured_media":{"alt":null,"id":6727643988057,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2090_jr2_remote_control_footswitch_1534950560_927553_3e0b5ccb-5e66-4d3e-96d5-fcca373b52f2.jpg?v=1596005608"}}},{"id":32080359620697,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 2090","requires_shipping":true,"taxable":true,"featured_image":{"id":14556122087513,"product_id":4691280363609,"position":2,"created_at":"2020-07-29T02:53:28-04:00","updated_at":"2020-07-29T02:53:28-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534950912_IMG_1051606_d7354006-969e-4ca4-afbb-a7a1f6efc83f.jpg?v=1596005608","variant_ids":[32080359620697]},"available":true,"name":"Radial Engineering JR-2 Remote Control Footswitch - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":9000,"weight":1361,"compare_at_price":11000,"inventory_management":"shopify","barcode":"676101040421","featured_media":{"alt":null,"id":6727644020825,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534950912_IMG_1051606_d7354006-969e-4ca4-afbb-a7a1f6efc83f.jpg?v=1596005608"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2090_jr2_remote_control_footswitch_1534950560_927553_3e0b5ccb-5e66-4d3e-96d5-fcca373b52f2.jpg?v=1596005608","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534950912_IMG_1051606_d7354006-969e-4ca4-afbb-a7a1f6efc83f.jpg?v=1596005608","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534950912_IMG_1051607_745ab44d-5b7e-4e94-8e30-0d786b99f535.jpg?v=1596005608"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2090_jr2_remote_control_footswitch_1534950560_927553_3e0b5ccb-5e66-4d3e-96d5-fcca373b52f2.jpg?v=1596005608","options":["Title"],"media":[{"alt":null,"id":6727643988057,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2090_jr2_remote_control_footswitch_1534950560_927553_3e0b5ccb-5e66-4d3e-96d5-fcca373b52f2.jpg?v=1596005608"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_2090_jr2_remote_control_footswitch_1534950560_927553_3e0b5ccb-5e66-4d3e-96d5-fcca373b52f2.jpg?v=1596005608","width":500},{"alt":null,"id":6727644020825,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534950912_IMG_1051606_d7354006-969e-4ca4-afbb-a7a1f6efc83f.jpg?v=1596005608"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534950912_IMG_1051606_d7354006-969e-4ca4-afbb-a7a1f6efc83f.jpg?v=1596005608","width":500},{"alt":null,"id":6727644053593,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534950912_IMG_1051607_745ab44d-5b7e-4e94-8e30-0d786b99f535.jpg?v=1596005607"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534950912_IMG_1051607_745ab44d-5b7e-4e94-8e30-0d786b99f535.jpg?v=1596005607","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eJR-2 Remote Control Footswitch \u003c\/strong\u003efrom\u003cstrong\u003e Radial Engineering \u003c\/strong\u003eis designed for use with the Firefly Tube Direct Box. This compact switcher features 2 footswitches and 3 LEDs. Power is supplied by the Firefly, thus eliminating the need for batteries or a secondary power supply. Connection between the 2 devices is done with a balanced cable with a 1\/4” TRS connector at one end and choice between a 1\/4” TRS or XLR at the other. The XLR has the added benefit of being able to be locked.\u003c\/p\u003e\n\u003cp\u003eWith the JR-2 connected, you can remotely select between inputs A and B to select the desired instrument. The second switch is used to mute the Firefly Tube Direct Box for quiet on-stage tuning via the always-on Tuner output. Depressing the footswitch illuminates the LED indicators to let you know which function is active.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering JR-2 Remote Control Footswitch

Radial Engineering JR-2 Remote Control Footswitch

$99.99

The JR-2 Remote Control Footswitch from Radial Engineering is designed for use with the Firefly Tube Direct Box. This compact switcher features 2 footswitches and 3 LEDs. Power is supplied by the Firefly, thus eliminating the need for batteries or a secondary power supply. Connection between the 2 devices is done with a balanced cable with a ...

Title

More Info
12%
Sale
Radial Engineering JRAK 4 Radial Rack and Panel Adapter
{"id":4691276496985,"title":"Radial Engineering JRAK 4 Radial Rack and Panel Adapter","handle":"radial-engineering-jrak-4-radial-rack-and-panel-adapter","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eJRAK 4 Radial Rack and Panel Adapter \u003c\/strong\u003efrom Radial Engineering enables you to temporarily fit your Radial product into a flight case or securely bolt it down to a podium or inside an amplifier cabinet should the need arise.\u003c\/p\u003e\n\u003cp\u003eDesigned to accommodate up to 4 Radial standard format boxes, the J-Rak 4 enables you to horizontally mount the devices in a single rack space (1.75\"). Mounting the unit is easy, simply unscrew the bookend outer shell and slide into place. Secure the Radial device using the supplied screws.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T02:39:48-04:00","created_at":"2020-07-29T02:39:47-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24","Guitar Pedal"],"price":10999,"price_min":10999,"price_max":11999,"available":true,"price_varies":true,"compare_at_price":12500,"compare_at_price_min":12500,"compare_at_price_max":12500,"compare_at_price_varies":false,"variants":[{"id":32080348938329,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 1016-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14556071755865,"product_id":4691276496985,"position":1,"created_at":"2020-07-29T02:39:48-04:00","updated_at":"2020-07-29T02:39:48-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1016_j_rak_4_radial_rack_1383586232_927557.jpg?v=1596004788","variant_ids":[32080348938329,32080348971097]},"available":true,"name":"Radial Engineering JRAK 4 Radial Rack and Panel Adapter - NEW","public_title":"NEW","options":["NEW"],"price":11999,"weight":4536,"compare_at_price":12500,"inventory_management":"shopify","barcode":"676101040339","featured_media":{"alt":null,"id":6727593721945,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1016_j_rak_4_radial_rack_1383586232_927557.jpg?v=1596004788"}}},{"id":32080348971097,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 1016-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14556071755865,"product_id":4691276496985,"position":1,"created_at":"2020-07-29T02:39:48-04:00","updated_at":"2020-07-29T02:39:48-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1016_j_rak_4_radial_rack_1383586232_927557.jpg?v=1596004788","variant_ids":[32080348938329,32080348971097]},"available":true,"name":"Radial Engineering JRAK 4 Radial Rack and Panel Adapter - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":10999,"weight":4536,"compare_at_price":12500,"inventory_management":"shopify","barcode":"676101040339","featured_media":{"alt":null,"id":6727593721945,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1016_j_rak_4_radial_rack_1383586232_927557.jpg?v=1596004788"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1016_j_rak_4_radial_rack_1383586232_927557.jpg?v=1596004788"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1016_j_rak_4_radial_rack_1383586232_927557.jpg?v=1596004788","options":["Title"],"media":[{"alt":null,"id":6727593721945,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1016_j_rak_4_radial_rack_1383586232_927557.jpg?v=1596004788"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1016_j_rak_4_radial_rack_1383586232_927557.jpg?v=1596004788","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eJRAK 4 Radial Rack and Panel Adapter \u003c\/strong\u003efrom Radial Engineering enables you to temporarily fit your Radial product into a flight case or securely bolt it down to a podium or inside an amplifier cabinet should the need arise.\u003c\/p\u003e\n\u003cp\u003eDesigned to accommodate up to 4 Radial standard format boxes, the J-Rak 4 enables you to horizontally mount the devices in a single rack space (1.75\"). Mounting the unit is easy, simply unscrew the bookend outer shell and slide into place. Secure the Radial device using the supplied screws.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering JRAK 4 Radial Rack and Panel Adapter

Radial Engineering JRAK 4 Radial Rack and Panel Adapter

$119.99

The JRAK 4 Radial Rack and Panel Adapter from Radial Engineering enables you to temporarily fit your Radial product into a flight case or securely bolt it down to a podium or inside an amplifier cabinet should the need arise. Designed to accommodate up to 4 Radial standard format boxes, the J-Rak 4 enables you to horizontally mount the device...

Title

More Info
17%
Sale
Radial Engineering Studio-Q Talkback Interface with Built-In Mic StudioQ
{"id":4691274498137,"title":"Radial Engineering Studio-Q Talkback Interface with Built-In Mic StudioQ","handle":"radial-engineering-studio-q-talkback-interface-with-built-in-mic-studioq","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eForget screaming through the door and using wild hand gestures to tell the drummer to quiet down on the next take; \u003cb\u003eRadial Engineering\u003c\/b\u003e\u003cstrong\u003e's\u003c\/strong\u003e \u003cb\u003eStudio-Q Talk-Back Interface with Built-In Mic\u003c\/b\u003e is a simple, compact system which makes communication between the artist and engineer\/producer convenient in the recording studio.\u003c\/p\u003e\n\u003cp\u003eThe Q has an onboard mic for saving that SM57 for micing the snare, or an XLR input for a tabletop mic that makes you look more producer-y; each mic has a designated trim control. The program signal path is balanced for easy integration with most desks, and you can set its volume with the level control on the front panel. For remote control, the JR1 mute footswitch (available separately) can be connected via a jack.\u003c\/p\u003e\n\u003cp\u003eWhen the Q is activated for talkback, the program volume reduces to its preset level, for more streamlined communication. Lastly, the Studio Q has an output for sending a dry contact to a beacon for getting those shoegazer bands' attention.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eSimple interface\u003c\/li\u003e\n\u003cli\u003eStraightforward connectivity for easy setup\u003c\/li\u003e\n\u003cli\u003eCan use onboard microphone or desktop mic\u003c\/li\u003e\n\u003cli\u003eDesignated trim pots for each mic\u003c\/li\u003e\n\u003cli\u003eRemote switching capabilities with the JR1 mute footswitch (available separately)\u003c\/li\u003e\n\u003cli\u003eBalanced program signal path\u003c\/li\u003e\n\u003cli\u003eDry contact output for beacon connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T02:30:59-04:00","created_at":"2020-07-29T02:31:00-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24","Guitar Pedal"],"price":24999,"price_min":24999,"price_max":25999,"available":true,"price_varies":true,"compare_at_price":30000,"compare_at_price_min":30000,"compare_at_price_max":30000,"compare_at_price_varies":false,"variants":[{"id":32080346742873,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 1435-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14556050980953,"product_id":4691274498137,"position":1,"created_at":"2020-07-29T02:31:57-04:00","updated_at":"2020-07-29T02:32:09-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1435_studio_q_talkback_interface_with_1531322593_1239921.jpg?v=1596004329","variant_ids":[32080346742873]},"available":true,"name":"Radial Engineering Studio-Q Talkback Interface with Built-In Mic StudioQ - NEW","public_title":"NEW","options":["NEW"],"price":25999,"weight":1361,"compare_at_price":30000,"inventory_management":"shopify","barcode":"676101044474","featured_media":{"alt":null,"id":6727572848729,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1435_studio_q_talkback_interface_with_1531322593_1239921.jpg?v=1596004317"}}},{"id":32080346775641,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 1435-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14556050817113,"product_id":4691274498137,"position":2,"created_at":"2020-07-29T02:31:56-04:00","updated_at":"2020-07-29T02:32:09-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024962.jpg?v=1596004329","variant_ids":[32080346775641]},"available":true,"name":"Radial Engineering Studio-Q Talkback Interface with Built-In Mic StudioQ - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":24999,"weight":1361,"compare_at_price":30000,"inventory_management":"shopify","barcode":"676101044474","featured_media":{"alt":null,"id":6727572750425,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024962.jpg?v=1596004316"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1435_studio_q_talkback_interface_with_1531322593_1239921.jpg?v=1596004329","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024962.jpg?v=1596004329","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024963.jpg?v=1596004329","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024964.jpg?v=1596004329"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1435_studio_q_talkback_interface_with_1531322593_1239921.jpg?v=1596004329","options":["Title"],"media":[{"alt":null,"id":6727572848729,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1435_studio_q_talkback_interface_with_1531322593_1239921.jpg?v=1596004317"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1435_studio_q_talkback_interface_with_1531322593_1239921.jpg?v=1596004317","width":500},{"alt":null,"id":6727572750425,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024962.jpg?v=1596004316"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024962.jpg?v=1596004316","width":500},{"alt":null,"id":6727572815961,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024963.jpg?v=1596004317"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024963.jpg?v=1596004317","width":500},{"alt":null,"id":6727572783193,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024964.jpg?v=1596004316"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024964.jpg?v=1596004316","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eForget screaming through the door and using wild hand gestures to tell the drummer to quiet down on the next take; \u003cb\u003eRadial Engineering\u003c\/b\u003e\u003cstrong\u003e's\u003c\/strong\u003e \u003cb\u003eStudio-Q Talk-Back Interface with Built-In Mic\u003c\/b\u003e is a simple, compact system which makes communication between the artist and engineer\/producer convenient in the recording studio.\u003c\/p\u003e\n\u003cp\u003eThe Q has an onboard mic for saving that SM57 for micing the snare, or an XLR input for a tabletop mic that makes you look more producer-y; each mic has a designated trim control. The program signal path is balanced for easy integration with most desks, and you can set its volume with the level control on the front panel. For remote control, the JR1 mute footswitch (available separately) can be connected via a jack.\u003c\/p\u003e\n\u003cp\u003eWhen the Q is activated for talkback, the program volume reduces to its preset level, for more streamlined communication. Lastly, the Studio Q has an output for sending a dry contact to a beacon for getting those shoegazer bands' attention.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eSimple interface\u003c\/li\u003e\n\u003cli\u003eStraightforward connectivity for easy setup\u003c\/li\u003e\n\u003cli\u003eCan use onboard microphone or desktop mic\u003c\/li\u003e\n\u003cli\u003eDesignated trim pots for each mic\u003c\/li\u003e\n\u003cli\u003eRemote switching capabilities with the JR1 mute footswitch (available separately)\u003c\/li\u003e\n\u003cli\u003eBalanced program signal path\u003c\/li\u003e\n\u003cli\u003eDry contact output for beacon connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering Studio-Q Talkback Interface with Built-In Mic StudioQ

Radial Engineering Studio-Q Talkback Interface with Built-In Mic StudioQ

$259.99

Forget screaming through the door and using wild hand gestures to tell the drummer to quiet down on the next take; Radial Engineering's Studio-Q Talk-Back Interface with Built-In Mic is a simple, compact system which makes communication between the artist and engineer/producer convenient in the recording studio. The Q has an onboard mic for s...

Title

More Info
18%
Sale
Radial Engineering Gold Digger 4-Channel Mic Selector DI Direct Box
{"id":4691273285721,"title":"Radial Engineering Gold Digger 4-Channel Mic Selector DI Direct Box","handle":"radial-engineering-gold-digger-4-channel-mic-selector-di-direct-box","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eGold Digger 4-Channel Mic Selector \u003c\/strong\u003efrom \u003cstrong\u003eRadial Engineering \u003c\/strong\u003eenables you to quickly compare the sound of 4 different microphones while sharing the same preamp. A straight wire passive circuit design is void of any audio buffers or transformers. This unit uses military-grade gold contact relays to manage the switching process, thus ensuring the mic signal is maintained without introducing color, distortion, or artifacts of any kind.\u003c\/p\u003e\n\u003cp\u003eThe Gold Digger features 4 rear-mounted XLR-F mic inputs plus an XLR-M output to feed the preamp. To eliminate bleed between microphones, each channel is equipped with a radio-style selector switch that ensures only one mic is on at a time. The external supply provides power for the LED indicators, charges the relays, and enables the Gold Digger to generate 48V phantom, which can be turned on or off for each mic as needed.\u003c\/p\u003e\n\u003cp\u003eTo ensure an honest comparison between microphones, individual ‘set \u0026amp; forget’ trim controls let you adjust each mic level so that they produce the same relative output. Once set up, the Gold Digger not only helps to improve the workflow, but it gives the artist more confidence with the sound of the vocal, resulting in a better overall performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eFour selectable inputs with trim adjusts\u003c\/li\u003e\n\u003cli\u003eStraight wire distortion-free signal path\u003c\/li\u003e\n\u003cli\u003eWill not introduce color or artifact\u003c\/li\u003e\n\u003cli\u003eIncreases artist's confidence when recording\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T02:27:18-04:00","created_at":"2020-07-29T02:27:18-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24","Guitar Pedal"],"price":32999,"price_min":32999,"price_max":34999,"available":true,"price_varies":true,"compare_at_price":40000,"compare_at_price_min":40000,"compare_at_price_max":40000,"compare_at_price_varies":false,"variants":[{"id":32080344186969,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 1440-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14556037447769,"product_id":4691273285721,"position":1,"created_at":"2020-07-29T02:28:53-04:00","updated_at":"2020-07-29T02:28:53-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1440_gold_digger_4_channel_mic_1363181849_927547.jpg?v=1596004133","variant_ids":[32080344186969]},"available":true,"name":"Radial Engineering Gold Digger 4-Channel Mic Selector DI Direct Box - NEW","public_title":"NEW","options":["NEW"],"price":34999,"weight":1361,"compare_at_price":40000,"inventory_management":"shopify","barcode":"676101040513","featured_media":{"alt":null,"id":6727559282777,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1440_gold_digger_4_channel_mic_1363181849_927547.jpg?v=1596004133"}}},{"id":32080344219737,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 1440-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14556037546073,"product_id":4691273285721,"position":2,"created_at":"2020-07-29T02:28:54-04:00","updated_at":"2020-07-29T02:28:54-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308043.jpg?v=1596004134","variant_ids":[32080344219737]},"available":true,"name":"Radial Engineering Gold Digger 4-Channel Mic Selector DI Direct Box - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":32999,"weight":1361,"compare_at_price":40000,"inventory_management":"shopify","barcode":"676101040513","featured_media":{"alt":null,"id":6727559315545,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308043.jpg?v=1596004134"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1440_gold_digger_4_channel_mic_1363181849_927547.jpg?v=1596004133","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308043.jpg?v=1596004134","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308042.jpg?v=1596004134","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308044.jpg?v=1596004134"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1440_gold_digger_4_channel_mic_1363181849_927547.jpg?v=1596004133","options":["Title"],"media":[{"alt":null,"id":6727559282777,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1440_gold_digger_4_channel_mic_1363181849_927547.jpg?v=1596004133"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1440_gold_digger_4_channel_mic_1363181849_927547.jpg?v=1596004133","width":500},{"alt":null,"id":6727559315545,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308043.jpg?v=1596004134"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308043.jpg?v=1596004134","width":500},{"alt":null,"id":6727559348313,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308042.jpg?v=1596004134"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308042.jpg?v=1596004134","width":500},{"alt":null,"id":6727559381081,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308044.jpg?v=1596004133"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1363181643_IMG_308044.jpg?v=1596004133","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eGold Digger 4-Channel Mic Selector \u003c\/strong\u003efrom \u003cstrong\u003eRadial Engineering \u003c\/strong\u003eenables you to quickly compare the sound of 4 different microphones while sharing the same preamp. A straight wire passive circuit design is void of any audio buffers or transformers. This unit uses military-grade gold contact relays to manage the switching process, thus ensuring the mic signal is maintained without introducing color, distortion, or artifacts of any kind.\u003c\/p\u003e\n\u003cp\u003eThe Gold Digger features 4 rear-mounted XLR-F mic inputs plus an XLR-M output to feed the preamp. To eliminate bleed between microphones, each channel is equipped with a radio-style selector switch that ensures only one mic is on at a time. The external supply provides power for the LED indicators, charges the relays, and enables the Gold Digger to generate 48V phantom, which can be turned on or off for each mic as needed.\u003c\/p\u003e\n\u003cp\u003eTo ensure an honest comparison between microphones, individual ‘set \u0026amp; forget’ trim controls let you adjust each mic level so that they produce the same relative output. Once set up, the Gold Digger not only helps to improve the workflow, but it gives the artist more confidence with the sound of the vocal, resulting in a better overall performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eFour selectable inputs with trim adjusts\u003c\/li\u003e\n\u003cli\u003eStraight wire distortion-free signal path\u003c\/li\u003e\n\u003cli\u003eWill not introduce color or artifact\u003c\/li\u003e\n\u003cli\u003eIncreases artist's confidence when recording\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering Gold Digger 4-Channel Mic Selector DI Direct Box

Radial Engineering Gold Digger 4-Channel Mic Selector DI Direct Box

$349.99

The Gold Digger 4-Channel Mic Selector from Radial Engineering enables you to quickly compare the sound of 4 different microphones while sharing the same preamp. A straight wire passive circuit design is void of any audio buffers or transformers. This unit uses military-grade gold contact relays to manage the switching process, thus ensuring ...

Title

More Info
14%
Sale
Radial Engineering PHAZER Phase Alignment Tool DI Direct Box
{"id":4691271942233,"title":"Radial Engineering PHAZER Phase Alignment Tool DI Direct Box","handle":"radial-engineering-phazer-phase-alignment-tool","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003ePHAZER Phase Alignment Tool\u003c\/strong\u003e from \u003cstrong\u003eRadial Engineering Limited \u003c\/strong\u003eis an analog phase correction device designed to time-align 2 signals so that the fundamental frequency of both signals play at the same time. For instance, you may have one microphone on the batter-head of a kick drum for more attack, while a second microphone may be on the outside of the drum to add body. When the kick-pedal strikes the batter-head, the sound of the first head will occur slightly before the second. Delaying the sound of the first head allows you to play both at precisely the same moment, which will produce a rich tone. This same approach is particularly effective with guitar amplifiers when combining a direct feed from a guitar amp with a microphone on the cabinet or when combining 2 room microphones, such as a close microphone on an acoustic guitar and a second microphone to pick up the room ambiance.\u003c\/p\u003e\n\u003cp\u003eAs it is physically impossible to time-align all frequencies due to each harmonic having a different wavelength, the Phazer Phase Alignment Tool must be heard to be effective. By listening to the tone as you rotate the phase control, you will hear when both sounds come in focus and will be able to find the sweet spot.\u003c\/p\u003e\n\u003cp\u003eAs this is most evident when the lower fundamentals align, this tool is also equipped with a low pass filter that rolls off high frequencies above a variable cut-off point to help reduce phase anomalies in the upper spectrum.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eLine-level I\/O for mixer insert points\u003c\/li\u003e\n\u003cli\u003eVariable phase control with 0 to 360° of shift\u003c\/li\u003e\n\u003cli\u003eLow pass filter (high-cut) focuses bass response\u003c\/li\u003e\n\u003cli\u003eBypass switch for A\/B comparison\u003c\/li\u003e\n\u003cli\u003eClass-A circuit for transparent sound\u003c\/li\u003e\n\u003cli\u003eSaves tracks and editing time\u003c\/li\u003e\n\u003cli\u003eEasy-to-use, just dial-in the sweet spot\u003c\/li\u003e\n\u003cli\u003ePhase On bypasses the phase-shift circuit for quick A\/B comparison of phase effect\u003c\/li\u003e\n\u003cli\u003eSHIFT used in conjunction with the Phase control to access the 180 to 360° phase range\u003c\/li\u003e\n\u003cli\u003ePhase Adjust rotation over a 180° range. Used with Shift control to cover full 360° rotation\u003c\/li\u003e\n\u003cli\u003ePower switch with LED indicator\u003c\/li\u003e\n\u003cli\u003eGround Lift reduces noise caused by ground loops\u003c\/li\u003e\n\u003cli\u003eFilter Cut-Off adjusts the filter's variable cut-off point\u003c\/li\u003e\n\u003cli\u003eFilter Range selects the range of the filter\u003c\/li\u003e\n\u003cli\u003eFilter On bypasses the low pass filter for quick comparison of the un-filtered signal path\u003c\/li\u003e\n\u003cli\u003eApplications: Phase aligns microphone and direct box signals, corrects phase between spaced microphones, can be used with JDX and microphones for guitar sounds, and on bass designed for percussion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T02:21:37-04:00","created_at":"2020-07-29T02:21:37-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24","Guitar Pedal"],"price":29999,"price_min":29999,"price_max":31999,"available":true,"price_varies":true,"compare_at_price":35000,"compare_at_price_min":35000,"compare_at_price_max":35000,"compare_at_price_varies":false,"variants":[{"id":32080338092121,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 1450-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14556014346329,"product_id":4691271942233,"position":1,"created_at":"2020-07-29T02:24:14-04:00","updated_at":"2020-07-29T02:24:42-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1450_phazer_phase_alignment_tool_1340278493_536094.jpg?v=1596003882","variant_ids":[32080338092121]},"available":true,"name":"Radial Engineering PHAZER Phase Alignment Tool DI Direct Box - NEW","public_title":"NEW","options":["NEW"],"price":31999,"weight":1361,"compare_at_price":35000,"inventory_management":"shopify","barcode":"676101037827","featured_media":{"alt":null,"id":6727536181337,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1450_phazer_phase_alignment_tool_1340278493_536094.jpg?v=1596003854"}}},{"id":32080338157657,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 1450-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14556014379097,"product_id":4691271942233,"position":2,"created_at":"2020-07-29T02:24:14-04:00","updated_at":"2020-07-29T02:24:42-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258990.jpg?v=1596003882","variant_ids":[32080338157657]},"available":true,"name":"Radial Engineering PHAZER Phase Alignment Tool DI Direct Box - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":29999,"weight":1361,"compare_at_price":35000,"inventory_management":"shopify","barcode":"676101037827","featured_media":{"alt":null,"id":6727536214105,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258990.jpg?v=1596003854"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1450_phazer_phase_alignment_tool_1340278493_536094.jpg?v=1596003882","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258990.jpg?v=1596003882","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258991.jpg?v=1596003882","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258988.jpg?v=1596003854","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258989.jpg?v=1596003855"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1450_phazer_phase_alignment_tool_1340278493_536094.jpg?v=1596003882","options":["Title"],"media":[{"alt":null,"id":6727536181337,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1450_phazer_phase_alignment_tool_1340278493_536094.jpg?v=1596003854"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1450_phazer_phase_alignment_tool_1340278493_536094.jpg?v=1596003854","width":500},{"alt":null,"id":6727536214105,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258990.jpg?v=1596003854"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258990.jpg?v=1596003854","width":500},{"alt":null,"id":6727536148569,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258991.jpg?v=1596003853"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258991.jpg?v=1596003853","width":500},{"alt":null,"id":6727536246873,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258988.jpg?v=1596003853"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258988.jpg?v=1596003853","width":500},{"alt":null,"id":6727536279641,"position":5,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258989.jpg?v=1596003855"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1340277799_IMG_258989.jpg?v=1596003855","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003ePHAZER Phase Alignment Tool\u003c\/strong\u003e from \u003cstrong\u003eRadial Engineering Limited \u003c\/strong\u003eis an analog phase correction device designed to time-align 2 signals so that the fundamental frequency of both signals play at the same time. For instance, you may have one microphone on the batter-head of a kick drum for more attack, while a second microphone may be on the outside of the drum to add body. When the kick-pedal strikes the batter-head, the sound of the first head will occur slightly before the second. Delaying the sound of the first head allows you to play both at precisely the same moment, which will produce a rich tone. This same approach is particularly effective with guitar amplifiers when combining a direct feed from a guitar amp with a microphone on the cabinet or when combining 2 room microphones, such as a close microphone on an acoustic guitar and a second microphone to pick up the room ambiance.\u003c\/p\u003e\n\u003cp\u003eAs it is physically impossible to time-align all frequencies due to each harmonic having a different wavelength, the Phazer Phase Alignment Tool must be heard to be effective. By listening to the tone as you rotate the phase control, you will hear when both sounds come in focus and will be able to find the sweet spot.\u003c\/p\u003e\n\u003cp\u003eAs this is most evident when the lower fundamentals align, this tool is also equipped with a low pass filter that rolls off high frequencies above a variable cut-off point to help reduce phase anomalies in the upper spectrum.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eLine-level I\/O for mixer insert points\u003c\/li\u003e\n\u003cli\u003eVariable phase control with 0 to 360° of shift\u003c\/li\u003e\n\u003cli\u003eLow pass filter (high-cut) focuses bass response\u003c\/li\u003e\n\u003cli\u003eBypass switch for A\/B comparison\u003c\/li\u003e\n\u003cli\u003eClass-A circuit for transparent sound\u003c\/li\u003e\n\u003cli\u003eSaves tracks and editing time\u003c\/li\u003e\n\u003cli\u003eEasy-to-use, just dial-in the sweet spot\u003c\/li\u003e\n\u003cli\u003ePhase On bypasses the phase-shift circuit for quick A\/B comparison of phase effect\u003c\/li\u003e\n\u003cli\u003eSHIFT used in conjunction with the Phase control to access the 180 to 360° phase range\u003c\/li\u003e\n\u003cli\u003ePhase Adjust rotation over a 180° range. Used with Shift control to cover full 360° rotation\u003c\/li\u003e\n\u003cli\u003ePower switch with LED indicator\u003c\/li\u003e\n\u003cli\u003eGround Lift reduces noise caused by ground loops\u003c\/li\u003e\n\u003cli\u003eFilter Cut-Off adjusts the filter's variable cut-off point\u003c\/li\u003e\n\u003cli\u003eFilter Range selects the range of the filter\u003c\/li\u003e\n\u003cli\u003eFilter On bypasses the low pass filter for quick comparison of the un-filtered signal path\u003c\/li\u003e\n\u003cli\u003eApplications: Phase aligns microphone and direct box signals, corrects phase between spaced microphones, can be used with JDX and microphones for guitar sounds, and on bass designed for percussion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering PHAZER Phase Alignment Tool DI Direct Box

Radial Engineering PHAZER Phase Alignment Tool DI Direct Box

$319.99

The PHAZER Phase Alignment Tool from Radial Engineering Limited is an analog phase correction device designed to time-align 2 signals so that the fundamental frequency of both signals play at the same time. For instance, you may have one microphone on the batter-head of a kick drum for more attack, while a second microphone may be on the outs...

Title

More Info
16%
Sale
Radial Engineering Space Heater 8-Channel Tube Drive Summing Mixer
{"id":4691270139993,"title":"Radial Engineering Space Heater 8-Channel Tube Drive Summing Mixer","handle":"radial-engineering-space-heater-8-channel-tube-drive-summing-mixer","description":"\u003carticle class=\"content_sF4U0te87jYBdVZ2QLY5G\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eSpace Heater 8-Channel Tube Drive Summing Mixer\u003c\/b\u003e by\u003cb\u003e Radial Engineering\u003c\/b\u003e is a 1U rack-mountable summing mixer designed to warm up tracks in digital recording applications and to add character, headroom and quality of analog sound to digital mixing. The unit has four 12AX7 dual-cathode tubes wired as stereo pairs to drive the eight channels. Each channel features a unique Heat switch that lets you set the B+ tube voltage from 37, 75 and 150 volts to produce the desired amount of harmonic content or distortion. Setting the Space Heater to the highest voltage optimizes the tube performance for natural tube warmth. Reducing the voltage delivers a creamy and smooth distortion.\u003c\/p\u003e\n\u003cp\u003eEach of the eight channels is transformer coupled for added character while providing greater immunity against hum and buzz caused by ground loops. For recordings where you may prefer the sound of a vintage resistive summing mixer, the tube drive on each channel may be bypassed. A master left-right bus enables all eight channels to be mixed to stereo and auditioned via the built-in headphone amplifier. Eight balanced 1\/4\" TRS inputs, with individual sends and returns are coupled with two 25-pin D-Sub connectors to provide plenty of connectivity. And with a stereo LINK, you can easily expand to 16, 24 or even 32 channels for more possibilities.\u003c\/p\u003e\n\u003cp\u003eThis Space Heater is ideal for warming up vocals, adding grit to bass, and producing crushing drum tracks. Used live, it delivers a more natural sound to in-ear monitors without having to revert to lackluster compression.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eEight TRS balanced input and output jacks for easy connection to the Space Heater\u003c\/li\u003e\n\u003cli\u003e25-pin D-Sub follows the Tascam\/Pro Tools standard and is wired in parallel to the 1\/4\" jacks\u003c\/li\u003e\n\u003cli\u003eEight 1\/4\" TRS balanced sends feed the post tube signal to an external processor or may be used as additional outputs for parallel processing\u003c\/li\u003e\n\u003cli\u003eStereo summing outputs provide left and right summed outputs for the old school analogue character\u003c\/li\u003e\n\u003cli\u003eRecessed ground lift switch lifts pin-1 on the two XLR outputs to help reduce hum and buzz caused by ground loops\u003c\/li\u003e\n\u003cli\u003eStereo 1\/4\" TRS link in\/out bus used to combine two or more Space Heaters together for 16x2, 24x2 or even 32x2 expansion\u003c\/li\u003e\n\u003cli\u003e1\/4\" Stereo phone jack to connect headphones\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e","published_at":"2020-07-29T02:14:28-04:00","created_at":"2020-07-29T02:14:28-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24","Guitar Pedal"],"price":159999,"price_min":159999,"price_max":169999,"available":true,"price_varies":true,"compare_at_price":190000,"compare_at_price_min":190000,"compare_at_price_max":190000,"compare_at_price_varies":false,"variants":[{"id":32080313942105,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 7050-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14555996455001,"product_id":4691270139993,"position":1,"created_at":"2020-07-29T02:18:12-04:00","updated_at":"2020-07-29T02:18:52-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_7050_space_heater_8_channel_1534952185_1081064.jpg?v=1596003532","variant_ids":[32080313942105]},"available":true,"name":"Radial Engineering Space Heater 8-Channel Tube Drive Summing Mixer - NEW","public_title":"NEW","options":["NEW"],"price":169999,"weight":6804,"compare_at_price":190000,"inventory_management":"shopify","barcode":"","featured_media":{"alt":null,"id":6727518290009,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_7050_space_heater_8_channel_1534952185_1081064.jpg?v=1596003492"}}},{"id":32080313974873,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 7050-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14555996422233,"product_id":4691270139993,"position":2,"created_at":"2020-07-29T02:18:12-04:00","updated_at":"2020-07-29T02:18:52-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534951931_IMG_1051655.jpg?v=1596003532","variant_ids":[32080313974873]},"available":true,"name":"Radial Engineering Space Heater 8-Channel Tube Drive Summing Mixer - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":159999,"weight":6804,"compare_at_price":190000,"inventory_management":"shopify","barcode":"","featured_media":{"alt":null,"id":6727518355545,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534951931_IMG_1051655.jpg?v=1596003492"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_7050_space_heater_8_channel_1534952185_1081064.jpg?v=1596003532","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534951931_IMG_1051655.jpg?v=1596003532","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534951931_IMG_1051656.jpg?v=1596003532","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534951313_IMG_428952.jpg?v=1596003532"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_7050_space_heater_8_channel_1534952185_1081064.jpg?v=1596003532","options":["Title"],"media":[{"alt":null,"id":6727518290009,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_7050_space_heater_8_channel_1534952185_1081064.jpg?v=1596003492"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_7050_space_heater_8_channel_1534952185_1081064.jpg?v=1596003492","width":500},{"alt":null,"id":6727518355545,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534951931_IMG_1051655.jpg?v=1596003492"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534951931_IMG_1051655.jpg?v=1596003492","width":500},{"alt":null,"id":6727518322777,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534951931_IMG_1051656.jpg?v=1596003493"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534951931_IMG_1051656.jpg?v=1596003493","width":500},{"alt":null,"id":6727518257241,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534951313_IMG_428952.jpg?v=1596003492"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1534951313_IMG_428952.jpg?v=1596003492","width":500}],"content":"\u003carticle class=\"content_sF4U0te87jYBdVZ2QLY5G\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eSpace Heater 8-Channel Tube Drive Summing Mixer\u003c\/b\u003e by\u003cb\u003e Radial Engineering\u003c\/b\u003e is a 1U rack-mountable summing mixer designed to warm up tracks in digital recording applications and to add character, headroom and quality of analog sound to digital mixing. The unit has four 12AX7 dual-cathode tubes wired as stereo pairs to drive the eight channels. Each channel features a unique Heat switch that lets you set the B+ tube voltage from 37, 75 and 150 volts to produce the desired amount of harmonic content or distortion. Setting the Space Heater to the highest voltage optimizes the tube performance for natural tube warmth. Reducing the voltage delivers a creamy and smooth distortion.\u003c\/p\u003e\n\u003cp\u003eEach of the eight channels is transformer coupled for added character while providing greater immunity against hum and buzz caused by ground loops. For recordings where you may prefer the sound of a vintage resistive summing mixer, the tube drive on each channel may be bypassed. A master left-right bus enables all eight channels to be mixed to stereo and auditioned via the built-in headphone amplifier. Eight balanced 1\/4\" TRS inputs, with individual sends and returns are coupled with two 25-pin D-Sub connectors to provide plenty of connectivity. And with a stereo LINK, you can easily expand to 16, 24 or even 32 channels for more possibilities.\u003c\/p\u003e\n\u003cp\u003eThis Space Heater is ideal for warming up vocals, adding grit to bass, and producing crushing drum tracks. Used live, it delivers a more natural sound to in-ear monitors without having to revert to lackluster compression.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cul\u003e\n\u003cli\u003eEight TRS balanced input and output jacks for easy connection to the Space Heater\u003c\/li\u003e\n\u003cli\u003e25-pin D-Sub follows the Tascam\/Pro Tools standard and is wired in parallel to the 1\/4\" jacks\u003c\/li\u003e\n\u003cli\u003eEight 1\/4\" TRS balanced sends feed the post tube signal to an external processor or may be used as additional outputs for parallel processing\u003c\/li\u003e\n\u003cli\u003eStereo summing outputs provide left and right summed outputs for the old school analogue character\u003c\/li\u003e\n\u003cli\u003eRecessed ground lift switch lifts pin-1 on the two XLR outputs to help reduce hum and buzz caused by ground loops\u003c\/li\u003e\n\u003cli\u003eStereo 1\/4\" TRS link in\/out bus used to combine two or more Space Heaters together for 16x2, 24x2 or even 32x2 expansion\u003c\/li\u003e\n\u003cli\u003e1\/4\" Stereo phone jack to connect headphones\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/article\u003e"}
Radial Engineering Space Heater 8-Channel Tube Drive Summing Mixer

Radial Engineering Space Heater 8-Channel Tube Drive Summing Mixer

$1,699.99

The Space Heater 8-Channel Tube Drive Summing Mixer by Radial Engineering is a 1U rack-mountable summing mixer designed to warm up tracks in digital recording applications and to add character, headroom and quality of analog sound to digital mixing. The unit has four 12AX7 dual-cathode tubes wired as stereo pairs to drive the eight channels....

Title

More Info
20%
Sale
Radial Engineering MIX 2:1 - 2 Channel Audio Combiner & Mixer DI Direct Box
{"id":4691257491545,"title":"Radial Engineering MIX 2:1 - 2 Channel Audio Combiner \u0026 Mixer DI Direct Box","handle":"radial-engineering-mix-2-1-2-channel-audio-combiner-mixer-di-direct-box","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadial Engineering Mix 2:1\u003c\/strong\u003e is a passive mixer that sums two audio signals to a single mono output. It provides individual input knobs to balance the two signals, should one be louder than the other, as well as a polarity switch on input 2, should one of the signals be out of phase. The unit accepts balanced 1\/4\" and XLR inputs, outputting to a single XLR output.\u003c\/p\u003e\n\u003cp\u003eEach input can be switched on or off. This allows you to audition either signal before you make the choice to sum them together. Both level controls can be bypassed at any time thanks to a switch on the front panel. Should you hear any hum or buzz caused by ground loops, a ground lift switch has been provided to mitigate the issue. The Mix 2:1 is entirely passive, requiring no power to run, and features a military-grade PCB board protected against RF interference, as well as a durable 14-gauge steel chassis. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eInput Trim knobs for setting the amount of attenuation for each input\u003c\/li\u003e\n\u003cli\u003eLevel Bypass switch defeats trim knobs, combining the audio together equally\u003c\/li\u003e\n\u003cli\u003eDedicated buttons for activating\/muting each input\u003c\/li\u003e\n\u003cli\u003ePolarity button for flipping phase 180° on input 2; this can be useful when summing two out-of-phase signals\u003c\/li\u003e\n\u003cli\u003eTRS or XLR inputs further the versatility of the unit\u003c\/li\u003e\n\u003cli\u003eSingle, mono XLR output provides balanced signal to feed a powered speaker, mixing console, or recording interface\u003c\/li\u003e\n\u003cli\u003eGround lift switch to eliminate the buzz and hum usually caused by ground loops\u003c\/li\u003e\n\u003cli\u003eNo slip pad for electrical and mechanical isolation, as well as stability\u003c\/li\u003e\n\u003cli\u003eDurable powder coat protects the finish of the unit for years\u003c\/li\u003e\n\u003cli\u003e14-gauge steel construction for reliability and protection\u003c\/li\u003e\n\u003cli\u003eMilitary-spec circuit with full ground plane to reduce RF interference\u003c\/li\u003e\n\u003cli\u003eRobust switches with metal casing rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T02:10:07-04:00","created_at":"2020-07-29T02:10:07-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24","Guitar Pedal"],"price":11999,"price_min":11999,"price_max":12999,"available":true,"price_varies":true,"compare_at_price":15000,"compare_at_price_min":15000,"compare_at_price_max":15000,"compare_at_price_varies":false,"variants":[{"id":32080309092441,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 1036-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14555986657369,"product_id":4691257491545,"position":1,"created_at":"2020-07-29T02:11:41-04:00","updated_at":"2020-07-29T02:11:53-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024989.jpg?v=1596003113","variant_ids":[32080309092441]},"available":true,"name":"Radial Engineering MIX 2:1 - 2 Channel Audio Combiner \u0026 Mixer DI Direct Box - NEW","public_title":"NEW","options":["NEW"],"price":12999,"weight":1361,"compare_at_price":15000,"inventory_management":"shopify","barcode":"676101044658","featured_media":{"alt":null,"id":6727508623449,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024989.jpg?v=1596003101"}}},{"id":32080309125209,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 1036-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14555986722905,"product_id":4691257491545,"position":2,"created_at":"2020-07-29T02:11:42-04:00","updated_at":"2020-07-29T02:11:53-04:00","alt":null,"width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-281531322188_IMG_1024988webp_WEBPImage_500x500pixels.png?v=1596003113","variant_ids":[32080309125209]},"available":true,"name":"Radial Engineering MIX 2:1 - 2 Channel Audio Combiner \u0026 Mixer DI Direct Box - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":11999,"weight":1361,"compare_at_price":15000,"inventory_management":"shopify","barcode":"676101044658","featured_media":{"alt":null,"id":6727508557913,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-281531322188_IMG_1024988webp_WEBPImage_500x500pixels.png?v=1596003102"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024989.jpg?v=1596003113","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-281531322188_IMG_1024988webp_WEBPImage_500x500pixels.png?v=1596003113","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1036_passive_stereo_summing_mixer_1531322593_1334817.jpg?v=1596003113","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024990.jpg?v=1596003102","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024991.jpg?v=1596003102"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024989.jpg?v=1596003113","options":["Title"],"media":[{"alt":null,"id":6727508623449,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024989.jpg?v=1596003101"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024989.jpg?v=1596003101","width":500},{"alt":null,"id":6727508557913,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-281531322188_IMG_1024988webp_WEBPImage_500x500pixels.png?v=1596003102"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Screenshot_2020-07-281531322188_IMG_1024988webp_WEBPImage_500x500pixels.png?v=1596003102","width":1000},{"alt":null,"id":6727508590681,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1036_passive_stereo_summing_mixer_1531322593_1334817.jpg?v=1596003101"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1036_passive_stereo_summing_mixer_1531322593_1334817.jpg?v=1596003101","width":500},{"alt":null,"id":6727508656217,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024990.jpg?v=1596003101"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024990.jpg?v=1596003101","width":500},{"alt":null,"id":6727508688985,"position":5,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024991.jpg?v=1596003102"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024991.jpg?v=1596003102","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadial Engineering Mix 2:1\u003c\/strong\u003e is a passive mixer that sums two audio signals to a single mono output. It provides individual input knobs to balance the two signals, should one be louder than the other, as well as a polarity switch on input 2, should one of the signals be out of phase. The unit accepts balanced 1\/4\" and XLR inputs, outputting to a single XLR output.\u003c\/p\u003e\n\u003cp\u003eEach input can be switched on or off. This allows you to audition either signal before you make the choice to sum them together. Both level controls can be bypassed at any time thanks to a switch on the front panel. Should you hear any hum or buzz caused by ground loops, a ground lift switch has been provided to mitigate the issue. The Mix 2:1 is entirely passive, requiring no power to run, and features a military-grade PCB board protected against RF interference, as well as a durable 14-gauge steel chassis. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eKey Features at a Glance\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eInput Trim knobs for setting the amount of attenuation for each input\u003c\/li\u003e\n\u003cli\u003eLevel Bypass switch defeats trim knobs, combining the audio together equally\u003c\/li\u003e\n\u003cli\u003eDedicated buttons for activating\/muting each input\u003c\/li\u003e\n\u003cli\u003ePolarity button for flipping phase 180° on input 2; this can be useful when summing two out-of-phase signals\u003c\/li\u003e\n\u003cli\u003eTRS or XLR inputs further the versatility of the unit\u003c\/li\u003e\n\u003cli\u003eSingle, mono XLR output provides balanced signal to feed a powered speaker, mixing console, or recording interface\u003c\/li\u003e\n\u003cli\u003eGround lift switch to eliminate the buzz and hum usually caused by ground loops\u003c\/li\u003e\n\u003cli\u003eNo slip pad for electrical and mechanical isolation, as well as stability\u003c\/li\u003e\n\u003cli\u003eDurable powder coat protects the finish of the unit for years\u003c\/li\u003e\n\u003cli\u003e14-gauge steel construction for reliability and protection\u003c\/li\u003e\n\u003cli\u003eMilitary-spec circuit with full ground plane to reduce RF interference\u003c\/li\u003e\n\u003cli\u003eRobust switches with metal casing rated at over 20,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering MIX 2:1 - 2 Channel Audio Combiner & Mixer DI Direct Box

Radial Engineering MIX 2:1 - 2 Channel Audio Combiner & Mixer DI Direct Box

$129.99

The Radial Engineering Mix 2:1 is a passive mixer that sums two audio signals to a single mono output. It provides individual input knobs to balance the two signals, should one be louder than the other, as well as a polarity switch on input 2, should one of the signals be out of phase. The unit accepts balanced 1/4" and XLR inputs, outputting...

Title

More Info
20%
Sale
Radial Engineering SAT-2 Stereo Monitor Controller and Audio Attenuator SAT2
{"id":4691250413657,"title":"Radial Engineering SAT-2 Stereo Monitor Controller and Audio Attenuator SAT2","handle":"radial-engineering-sat-2-stereo-monitor-controller-and-audio-attenuator-sat2","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadial SAT-2\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003eis an analog stereo monitor controller and line attenuator designed for use with balanced or unbalanced line-level signals in commercial facilities, personal studios, live stage applications, and mobile rigs.\u003c\/p\u003e\n\u003cp\u003eUse it as a monitor controller by connecting it between an audio interface and a pair of active monitors. Common monitoring functions such as level and mute are available. A dim switch with an adjustable level allows easy toggling between quiet and loud monitoring levels. Press the Mono switch to check a mix for phase issues in mono.\u003c\/p\u003e\n\u003cp\u003eFor recording configurations, use the SAT-2 as a variable pad. Connect it between mic preamps and an audio interface to allow intentionally hot preamp levels for saturation and coloration without clipping the recorder.\u003c\/p\u003e\n\u003cp\u003eInputs are available on XLR and 1\/4” jacks. Balanced outputs are provided via XLR 3-pin connectors. A 14-gauge steel enclosure delivers sturdiness and durability. The SAT-2's passive design enables use without a power source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eAttenuate balanced or unbalanced analog stereo line-level signals\u003c\/li\u003e\n\u003cli\u003ePassive design requires no power source\u003c\/li\u003e\n\u003cli\u003eUse as a monitor controller for active monitors\u003c\/li\u003e\n\u003cli\u003ePad signals before a recording device\u003c\/li\u003e\n\u003cli\u003eAdjustable level control\u003c\/li\u003e\n\u003cli\u003eDim function with variable level\u003c\/li\u003e\n\u003cli\u003eMono sum function to check for phase cancellation in mono\u003c\/li\u003e\n\u003cli\u003eMute switch\u003c\/li\u003e\n\u003cli\u003eStereo XLR and 1\/4\" inputs\u003c\/li\u003e\n\u003cli\u003eStereo XLR outputs\u003c\/li\u003e\n\u003cli\u003e14-gauge steel enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T02:08:19-04:00","created_at":"2020-07-29T02:08:17-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24","Guitar Pedal"],"price":11999,"price_min":11999,"price_max":12999,"available":true,"price_varies":true,"compare_at_price":15000,"compare_at_price_min":15000,"compare_at_price_max":15000,"compare_at_price_varies":false,"variants":[{"id":32080290480217,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 1035-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14555981578329,"product_id":4691250413657,"position":1,"created_at":"2020-07-29T02:08:20-04:00","updated_at":"2020-07-29T02:08:20-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1035_stereo_audio_attenuator_and_1516718174_1334816.jpg?v=1596002900","variant_ids":[32080290480217]},"available":true,"name":"Radial Engineering SAT-2 Stereo Monitor Controller and Audio Attenuator SAT2 - NEW","public_title":"NEW","options":["NEW"],"price":12999,"weight":1361,"compare_at_price":15000,"inventory_management":"shopify","barcode":"676101044641","featured_media":{"alt":null,"id":6727503347801,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1035_stereo_audio_attenuator_and_1516718174_1334816.jpg?v=1596002900"}}},{"id":32080290512985,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 1035-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14555981709401,"product_id":4691250413657,"position":2,"created_at":"2020-07-29T02:08:21-04:00","updated_at":"2020-07-29T02:08:21-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1516718757_IMG_934397.jpg?v=1596002901","variant_ids":[32080290512985]},"available":true,"name":"Radial Engineering SAT-2 Stereo Monitor Controller and Audio Attenuator SAT2 - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":11999,"weight":1361,"compare_at_price":15000,"inventory_management":"shopify","barcode":"676101044641","featured_media":{"alt":null,"id":6727503380569,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1516718757_IMG_934397.jpg?v=1596002901"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1035_stereo_audio_attenuator_and_1516718174_1334816.jpg?v=1596002900","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1516718757_IMG_934397.jpg?v=1596002901","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1516718757_IMG_934398.jpg?v=1596002901","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1516718757_IMG_934399.jpg?v=1596002901"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1035_stereo_audio_attenuator_and_1516718174_1334816.jpg?v=1596002900","options":["Title"],"media":[{"alt":null,"id":6727503347801,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1035_stereo_audio_attenuator_and_1516718174_1334816.jpg?v=1596002900"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/radial_engineering_r800_1035_stereo_audio_attenuator_and_1516718174_1334816.jpg?v=1596002900","width":500},{"alt":null,"id":6727503380569,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1516718757_IMG_934397.jpg?v=1596002901"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1516718757_IMG_934397.jpg?v=1596002901","width":500},{"alt":null,"id":6727503413337,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1516718757_IMG_934398.jpg?v=1596002900"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1516718757_IMG_934398.jpg?v=1596002900","width":500},{"alt":null,"id":6727503446105,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1516718757_IMG_934399.jpg?v=1596002901"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1516718757_IMG_934399.jpg?v=1596002901","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eRadial SAT-2\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003eis an analog stereo monitor controller and line attenuator designed for use with balanced or unbalanced line-level signals in commercial facilities, personal studios, live stage applications, and mobile rigs.\u003c\/p\u003e\n\u003cp\u003eUse it as a monitor controller by connecting it between an audio interface and a pair of active monitors. Common monitoring functions such as level and mute are available. A dim switch with an adjustable level allows easy toggling between quiet and loud monitoring levels. Press the Mono switch to check a mix for phase issues in mono.\u003c\/p\u003e\n\u003cp\u003eFor recording configurations, use the SAT-2 as a variable pad. Connect it between mic preamps and an audio interface to allow intentionally hot preamp levels for saturation and coloration without clipping the recorder.\u003c\/p\u003e\n\u003cp\u003eInputs are available on XLR and 1\/4” jacks. Balanced outputs are provided via XLR 3-pin connectors. A 14-gauge steel enclosure delivers sturdiness and durability. The SAT-2's passive design enables use without a power source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cul\u003e\n\u003cli\u003eAttenuate balanced or unbalanced analog stereo line-level signals\u003c\/li\u003e\n\u003cli\u003ePassive design requires no power source\u003c\/li\u003e\n\u003cli\u003eUse as a monitor controller for active monitors\u003c\/li\u003e\n\u003cli\u003ePad signals before a recording device\u003c\/li\u003e\n\u003cli\u003eAdjustable level control\u003c\/li\u003e\n\u003cli\u003eDim function with variable level\u003c\/li\u003e\n\u003cli\u003eMono sum function to check for phase cancellation in mono\u003c\/li\u003e\n\u003cli\u003eMute switch\u003c\/li\u003e\n\u003cli\u003eStereo XLR and 1\/4\" inputs\u003c\/li\u003e\n\u003cli\u003eStereo XLR outputs\u003c\/li\u003e\n\u003cli\u003e14-gauge steel enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering SAT-2 Stereo Monitor Controller and Audio Attenuator SAT2

Radial Engineering SAT-2 Stereo Monitor Controller and Audio Attenuator SAT2

$129.99

The Radial SAT-2 is an analog stereo monitor controller and line attenuator designed for use with balanced or unbalanced line-level signals in commercial facilities, personal studios, live stage applications, and mobile rigs. Use it as a monitor controller by connecting it between an audio interface and a pair of active monitors. Common monit...

Title

More Info
19%
Sale
Radial Engineering J+4 Balanced Signal Driver - Stereo Preamplifier
{"id":4691210600537,"title":"Radial Engineering J+4 Balanced Signal Driver - Stereo Preamplifier","handle":"radial-engineering-j-4-balanced-signal-driver-stereo-preamplifier","description":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eRadial J+4 Balanced Signal Driver\u003c\/b\u003e is a stereo preamplifier designed to accept unbalanced, low output devices such as instruments, computers, or CD players and boost the signal to a balanced +4dB level.\u003c\/p\u003e\n\u003cp\u003eThe J+4 includes a variety of input connectors to accommodate most audio sources; a stereo pair of both 1\/4\" and RCAs, and a single 1\/8\" stereo input. The control panel is easy to operate, consisting only of a stereo level control, a high pass filter, and a ground lift. The boosted signal then outputs from a stereo pair of balanced XLRs.\u003c\/p\u003e\n\u003cp\u003eThe J+4 features 100% discrete components for optimal signal transfer. Noise is eliminated by combining the advantages of active signal buffering with transformer isolation, resulting in better than 95dB signal to noise ratio. This also ensures hum and buzz caused by ground loops, along with spurious noise from clocking, will not pollute the signal path.\u003c\/p\u003e\n\u003cp\u003eThe Radial J+4 is built to handle the extreme rigors of the professional audio world. It delivers exceptional sonic performance, plenty of headroom and ultra low noise making it the ideal addition to any audio system with low output sources.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eBoosts Signals to +4dB Balanced Line Level\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eThe J+4 takes a -10dB consumer level audio product, such as an iPod or a DJ mixer, and boosts the signal to +4dB commercial level without adding noise or distortion.\u003c\/div\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eVersatile Input Options\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eThe J+4 has input connectivity for dual 1\/4\", dual RCA, and a single 1\/8\" stereo input.\u003c\/div\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eTransformer Isolated\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eTransformer isolated circuitry eliminates noise caused by ground loops.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-07-29T01:58:11-04:00","created_at":"2020-07-29T01:58:11-04:00","vendor":"Radial Engineering","type":"Direct Box","tags":["Direct Box","finance24","Guitar Pedal"],"price":20999,"price_min":20999,"price_max":22999,"available":true,"price_varies":true,"compare_at_price":26000,"compare_at_price_min":26000,"compare_at_price_max":26000,"compare_at_price_varies":false,"variants":[{"id":32080259940441,"title":"NEW","option1":"NEW","option2":null,"option3":null,"sku":"R800 8015-A","requires_shipping":true,"taxable":true,"featured_image":{"id":14555957985369,"product_id":4691210600537,"position":1,"created_at":"2020-07-29T01:59:40-04:00","updated_at":"2020-07-29T01:59:40-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024932.jpg?v=1596002380","variant_ids":[32080259940441]},"available":true,"name":"Radial Engineering J+4 Balanced Signal Driver - Stereo Preamplifier - NEW","public_title":"NEW","options":["NEW"],"price":22999,"weight":1361,"compare_at_price":26000,"inventory_management":"shopify","barcode":"676101039692","featured_media":{"alt":null,"id":6727479754841,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024932.jpg?v=1596002380"}}},{"id":32080259973209,"title":"B-STOCK","option1":"B-STOCK","option2":null,"option3":null,"sku":"R800 8015-B","requires_shipping":true,"taxable":true,"featured_image":{"id":14555957854297,"product_id":4691210600537,"position":2,"created_at":"2020-07-29T01:59:38-04:00","updated_at":"2020-07-29T01:59:51-04:00","alt":null,"width":500,"height":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024931.jpg?v=1596002391","variant_ids":[32080259973209]},"available":true,"name":"Radial Engineering J+4 Balanced Signal Driver - Stereo Preamplifier - B-STOCK","public_title":"B-STOCK","options":["B-STOCK"],"price":20999,"weight":1361,"compare_at_price":26000,"inventory_management":"shopify","barcode":"676101039692","featured_media":{"alt":null,"id":6727479885913,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024931.jpg?v=1596002378"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024932.jpg?v=1596002380","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024931.jpg?v=1596002391","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_r800_8015_J_4_Balanced_Signal_Driver_1531322593_876606.jpg?v=1596002391","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024933.jpg?v=1596002391","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024934.jpg?v=1596002391","\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024935.jpg?v=1596002380"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024932.jpg?v=1596002380","options":["Title"],"media":[{"alt":null,"id":6727479754841,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024932.jpg?v=1596002380"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024932.jpg?v=1596002380","width":500},{"alt":null,"id":6727479885913,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024931.jpg?v=1596002378"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024931.jpg?v=1596002378","width":500},{"alt":null,"id":6727479820377,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_r800_8015_J_4_Balanced_Signal_Driver_1531322593_876606.jpg?v=1596002379"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/Radial_Engineering_r800_8015_J_4_Balanced_Signal_Driver_1531322593_876606.jpg?v=1596002379","width":500},{"alt":null,"id":6727479787609,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024933.jpg?v=1596002380"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024933.jpg?v=1596002380","width":500},{"alt":null,"id":6727479853145,"position":5,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024934.jpg?v=1596002379"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024934.jpg?v=1596002379","width":500},{"alt":null,"id":6727479918681,"position":6,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024935.jpg?v=1596002378"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0068\/8871\/8387\/products\/1531322188_IMG_1024935.jpg?v=1596002378","width":500}],"content":"\u003cdiv\u003e\n\u003cdiv class=\"\" data-selenium=\"overviewLongDescription\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\n\u003cp\u003eThe \u003cb\u003eRadial J+4 Balanced Signal Driver\u003c\/b\u003e is a stereo preamplifier designed to accept unbalanced, low output devices such as instruments, computers, or CD players and boost the signal to a balanced +4dB level.\u003c\/p\u003e\n\u003cp\u003eThe J+4 includes a variety of input connectors to accommodate most audio sources; a stereo pair of both 1\/4\" and RCAs, and a single 1\/8\" stereo input. The control panel is easy to operate, consisting only of a stereo level control, a high pass filter, and a ground lift. The boosted signal then outputs from a stereo pair of balanced XLRs.\u003c\/p\u003e\n\u003cp\u003eThe J+4 features 100% discrete components for optimal signal transfer. Noise is eliminated by combining the advantages of active signal buffering with transformer isolation, resulting in better than 95dB signal to noise ratio. This also ensures hum and buzz caused by ground loops, along with spurious noise from clocking, will not pollute the signal path.\u003c\/p\u003e\n\u003cp\u003eThe Radial J+4 is built to handle the extreme rigors of the professional audio world. It delivers exceptional sonic performance, plenty of headroom and ultra low noise making it the ideal addition to any audio system with low output sources.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv class=\"\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eBoosts Signals to +4dB Balanced Line Level\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eThe J+4 takes a -10dB consumer level audio product, such as an iPod or a DJ mixer, and boosts the signal to +4dB commercial level without adding noise or distortion.\u003c\/div\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eVersatile Input Options\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eThe J+4 has input connectivity for dual 1\/4\", dual RCA, and a single 1\/8\" stereo input.\u003c\/div\u003e\n\u003cdiv class=\"js-injected-html\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"\"\u003e\n\u003ch2 class=\"h2_2rws9renUitYEzmey3mjuE\"\u003eTransformer Isolated\u003c\/h2\u003e\n\u003cdiv class=\"description_dROY_Wl-Y_I8SrM9_Ji7q\"\u003e\n\u003cdiv class=\"js-injected-html\"\u003eTransformer isolated circuitry eliminates noise caused by ground loops.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Radial Engineering J+4 Balanced Signal Driver - Stereo Preamplifier

Radial Engineering J+4 Balanced Signal Driver - Stereo Preamplifier

$229.99

The Radial J+4 Balanced Signal Driver is a stereo preamplifier designed to accept unbalanced, low output devices such as instruments, computers, or CD players and boost the signal to a balanced +4dB level. The J+4 includes a variety of input connectors to accommodate most audio sources; a stereo pair of both 1/4" and RCAs, and a single 1/8" s...

Title

More Info